Black & Decker FM1400 User Manual

FM1400 Meat Mincer

First Use Safety Recommendation

Please read through this booklet for safe and efficient use of the appliance.
We urge you read and follow all instructions, even if you are familiar with a
similar appliance.

Keep this guide handy for future reference.

FM1400

English

IMPORTANT SAFEGUARDS

While using electrical appliances, in order to reduce the risk of fire, electric shock,
and / or injury to persons, basic safety precautions should be followed, including the
following:

• Read all instructions carefully, even if you are familiar with the appliance.

• To protect against the risk of electric shock, DO NOT IMMERSE the appliance,
cord set or plug in water or other liquids.

• To clean, wipe the exterior with a damp cloth.

• Close supervision is necessary when any appliance is used near children. Do not
allow children or any person unfamiliar with these instructions use this appliance.
Never leave an appliance unattended when in use.

• Switch off and remove the plug from the power outlet when not in use, before
assembling or disassembling parts, cleaning or carrying out any maintenance of
the appliance. Never pull the cord while unplugging out from power outlet.

• Do not operate any appliance with a damaged cord or plug, or after the appliance
malfunctions, or is dropped or damaged in any manner. Return the complete
appliance to your nearest authorized service facility for examination, electrical
repair, mechanical repair or adjustment to avoid any hazard.

• The use of attachments or accessories not recommended or sold by this
appliance manufacturer may result in fire, electric shock or personal injury.

• Do not let the cord hang over the edge of a table, counter, or touch hot surfaces.

• Avoid touching hot surfaces, use handles and knobs.

• Do not operate or place any part of this appliance on or near any hot surfaces
(such as gas or electric burner or in a heated oven).

• Do not abuse the cord. Never carry the appliance by the cord or yank it to
disconnect it from the outlet; instead, grasp the plug and pull to disconnect.

• When using an extension cord with your appliance, make sure the extension cord
is correctly wired, and rated for its use.

• This product is intended for household use only.

• Do not attempt to repair the appliance yourself; instead, take it to your Black &
Decker-owned or Authorized Service Centre for repair.

• Care should be taken when handling slicing discs & blade, especially when
removing them from the holders and during cleaning.

• Keep children and animals away from the appliance and cord set.

SAVE THESE INSTRUCTIONS

-2-

English

Parts Identification

1. Motor unit

2. Mincer head with inlet chute

3. Worm

11

8

4. Blade

5. Coarse & fine disc

6. Nut

7. Tray

8. Round pusher

12

9

5

6

4

2a

3

2

9. Sausage disc

10. Locking screw

11. Sausage stuffer

12. Kebbe Attachment

5a

1

Product Features :-

1400W as locked motor power - for the toughest of meat mincing.
Stainless Steel Blades and feeder - screw provides durability and efficiency
One speed operation - for all mincing operations
Reverse speed - assists in removing all blockages during operation.
Aluminium tray - for ease of feeding
Sausage stuffer - for making sausages.
Kebbe attachment - for making Kebbes.

Using your Meat Mincer

Your Meat Mincer is intended for grinding meat and vegetables for domestic purposes only. For indoor use
only. Kindly ensure that all the packaging material has been removed from the unit. Remove any instruction,
sticker etc. Ensure that the ratings on your mincer are the same as the line voltage in your home.

Wash all the parts other than the base unit in warm sudsy water and allow to dry. Your meat mincer is not only
for grinding meat but can also be used for grinding vegetables, and making sausages..

Assembly of Mincer Head:

1. Remove the locking screw (10) by turning it in an anti-clockwise direction. With the inlet

chute vertical, insert the mincer head (2) into the hole in the motor unit.
NOTE :- Ensure that the O-ring on the rear of the worm is in place.

2. Locate the plastic tab on the motor housing between in the space between the 2 circular

ribs on the Mincer head.

3. Fit the locking screw (10) & hand-tighten to lock the head in place.

Changing cutting disc

1. Remove the nut (6) by rotating it in an anti-clockwise direction.

2. Remove the disc (5), blade & worm & clean if necessary.

3. Mount the blade (4) on the worm (3) with the round side facing the worm and the smooth

side in contact with the disc (Figure 1)

 Note : the meat will not be minced if the blade is mounted with the wrong side facing the

screw.

4. Place te required cutting disk (5) (Figure 2) into the end of the Mincer head, locating the 2

tabs on the disks into the recesses in the head.

5. Fit & hand-tighten the nut (6) (Figure 3).

6. Fit the tray (7) (Figure 4) into the top of te inlet chute.

7

10

Fig. 1

Fig. 2

Fig. 3

Fig. 4

-3-