Black & Decker FD1600 User Manual

www.blackanddecker.ae

FD1600

ENGLISH

Parts Identification

1. Front guard with outter rim

2. Guard securing clip

3. Blade cap

4. Fan blade

5. Rear guard lock nut

6. Rear guard

7. Main unit

8. Base

9. Oscillation control knob

10. Speed control knob

11. Handle

12. Power cord

ENGLISH

Intended use

Your Black & Decker fan has been designed for indoor household use only. Remove all the parts from the packaging material and keep them aside . Ensure that you have all the parts as identified in the part identification list else get in touch with your nearest Black & Decker service agent assistance.

Read this entire manual carefully before using the appliance.

Safety instructions

• Warning! When using mains-powered

appliances, basic safety precautions, including the following, should always be followed to reduce the risk of fire, electric shock and personal injury.

• The intended use is described in this manual.

The use of any accessory or attachment or the performance of any operation with this appliance other than those recommended in this instruction manual may present a risk of personal injury.

• Retain this manual for future reference.

Using your appliance

• Always take care when using the appliance.

• Do not use the appliance outdoors.

• Do not operate the appliance if your hands

are wet. Do not operate the appliance if you are barefoot.

• Never pull the power supply cord to

disconnect the plug from the socket. Keep the power supply cord away from heat, oil and sharp edges.

• If the power supply cord is damaged during

use, disconnect the appliance from the power supply immediately. Do not touch the power supply cord before disconnecting from the power supply.

• Disconnect the appliance from the power

supply when not in use and before cleaning.

Safety of others

• This appliance is not intended for use by

persons (including children) with reduced physical sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

• Children should be supervised to ensure that

they do not play with the appliance.

After use

• Switch off, remove the plug from the socket

and let the appliance cool down before leaving it unattended and before changing, cleaning or inspecting any parts of the appliance.

• Guide the power supply cord neatly so it

does not hang over the edge of a worktop and cannot be caught accidentally or tripped over.

• When not in use, the appliance should be

stored in a dry place. Children should not have access to stored appliances.

ENGLISH

Inspection and repairs

• Switch off the appliance before cleaning,

changing accessories or approaching parts which move in use

• Before use, check the appliance for

damaged or defective parts. Check for breakage of parts, damage to switches and any other conditions that may affect its operation.

• Do not use the appliance if any part is

damaged or defective.

• Have any damaged or defective parts

repaired or replaced by an authorised repair agent.

• Before use, check the power supply cord for

signs of damage, ageing and wear.

• Do not use the appliance if the power supply

cord or mains plug is damaged or defective.

• If the power supply cord or mains plug is

damaged or defective it must be repaired by an authorised repair agent in order to avoid a hazard. Do not cut the power supply cord and do not attempt to repair it yourself.

• Never attempt to remove or replace any

parts other than those specified in this manual.

Electrical safety

Before use, check that the mains voltage corresponds to the voltage on the rating plate.

This appliance is double insulated in accordance with EN 60335-2-14; therefore no earth wire is required.

• To avoid the risk of electric shock, do not

immerse the cord, plug or motor unit in water or other liquid.

• Check that the supply voltage shown on the

rating plate of the appliance matches that of your electrical system. Any connection error will invalidate the guarantee.

Mains Plug Replacement

If a new mains plug needs to be fitted:

• Safely dispose of the old plug.

• Connect the brown lead to the live terminal of

the new plug.

• Connect the blue lead to the neutral terminal.

• If the product is class l (earthed), connect the

green / yellow lead to the earth terminal.

Warning! If your product is class ll double insulated (only 2 wires in the cord set), no connection is to be made to the earth terminal.

Follow the fitting instructions supplied with good quality plugs

Any replacement fuse must be of the same rating as the original fuse supplied with the product.

• If the supply cord is damaged, it must be

replaced by the manufacturer or an authorised Black & Decker Service Centre in order to avoid a hazard.

• Allow the appliance to cool before fitting or

removing any parts and before cleaning.

• Do not immerse the appliance in liquid.

Stand

ENGLISH

Base

Fitting and assembling

Assembling of base

Remove all the parts from the packaging material and keep them aside. Ensure that you have all the parts identification list, else get in touch with your nearest Black & Decker service agent for assistance.

Make sure your fan is switched off before connecting to or disconnecting from power supply. Ensure that the voltage rating on the base plate corresponds to the mains voltage at your home.

1. Lead the power cord through the opening in the base.

2. Insert the stand into the base by hinging it from the front side and then snapping it on the two snaps on the rear. Ensure that the main unit is well secured in place to the base.

3. Lead the power cord through the recess at the sideof the base.

Click

Usage of Box Fan

Remove the complete unit from the packaging material and keep it aside. Ensure that your fan is intact, else get in touch with your nearest Black & Decker service agent for assistance.

Make sure your fan is switched off before connecting to or disconnecting from the power supply. Ensure that the voltage rating on the base plate corresponds to the mains voltage at your home.

Move the speed switch vertically upwards to desired fan speed depending upon your requirment.

This fan has three different speed settings for optimum air cooling of your room.

0 - Off 1 - Low 2 - Medium 3 - High

The louvre can be made operational by rotating the lower switch to the 'O’ position this giving an all around circulation of air.

ENGLISH

Warning !

Never use the fan without the guard in place

•

or if the guard is damaged.

• Do not touch moving parts

• Always allow motor to stop before

approaching the blades or changing an accessory.

• Keep your fingers, long hair, loose clothes

and supply cord away from moving parts.

• Never pull the power cord to disconnect the

plug from the socket.

• Keep the power supply cord away from

heat, oil and sharp edges.

• Do not place the appliance on or near heat

source or in a heated oven

• Do not use the appliance outdoors. Always

protect the motor unit from water or excessive humidity

• Do not operate this unit in tropical climate or

in areas where the temperature exceeds 40ºC.

Technical Data

Voltage 220 – 240V ~ 50Hz Power input 60W Weight 3.75kg

• Operate the appliance only with dry hands.

• If the power supply cord is damaged during

use, disconnect the appliance from the power supply immediately . Do not touch the power supply cord before disconnecting from the power supply.

• When not in use, the appliance should be

stored in a dry place. Children should not have access to stored appliance.

• Do not cover the rear housing of the fan with

any cloth or curtain.

ENGLISH

Protecting the environment

Separate collection. This product must not

be disposed of with normal household waste.

Should you find one day that your Black & Decker product needs replacement, or if it is of no further use to you, do not dispose of it with other household waste. Make this product available for separate collection.

• Black & Decker provides a facility for

recycling Black & Decker products once they have reached the end of their working life. This service is provided free of charge. To take advantage of this service please return your product to any authorised repair agent who will collect them on our behalf.

• You can check the location of your nearest

authorised repair agent by contacting your local Black & Decker office at the address indicated in this manual. Alternatively, a list of authorized Black & Decker repair agents and full details of our after-sales service and contact are available on the Internet at: www.2helpU.com.

Guarantee

Black & Decker is confident of the quality of its products and offers an outstanding guarantee.

This guarantee statement is in addition to and in no way prejudices your statutory rights.

The guarantee is valid within the territories of the Member States of the European Union and the European Free Trade Area.

If a Black & Decker product becomes defective due to faulty materials, workmanship or lack of conformity, within 24 months from the date of purchase, Black & Decker guarantees to replace defective parts, repair products subjected to fair wear and tear or replace such products to ensure minimum inconvenience to the customer unless:

The product has been used for trade,

professional or hire purposes;

The product has been subjected to misuse

or neglect;

The product has sustained damage

through foreign objects, substances or accidents;

Repairs have been attempted by persons

other than authorised repair agents or Black & Decker service staff.

To claim on the guarantee, you will need to submit proof of purchase to the seller or an authorised repair agent. You can check the location of your nearest authorised repair agent by contacting your local Black & Decker office at the address indicated in this manual.

Alternatively, a list of authorised Black & Decker repair agents and full details of our after-sales service and contacts are available on the Internet at: www.2helpU.com.

+ 14 hidden pages