Black & Decker CDC14K2-XE, CDC18K2-XE, CDC18GK2-XE, CDC14GK2-XE User Manual

SAVE THIS MANUAL FOR FUTURE REFERENCE.

INSTRUCTION MANUAL

CCCCOOOORRRRDDDDLLLLEEEESSSSSSSS CCCCOOOOMMMMPPPPAAAACCCCTTTT DDDDRRRRIIIILLLLLLLLSS

BEFORE RETURNING THIS PRODUCT

FOR

ANY REASON PLEASE CALL

1-800-654-1551-800-654-155

BEFORE YOU CALL, HAVE THE CATALOG No. AND DATE CODE AVAILABLE. IN MOST CASES, A

BLACK & DECKER REPRESENTATIVE CAN RESOLVE THE PROBLEM OVER THE PHONE. IF YOU HAVE

A SUGGESTION OR COMMENT, GIVE US A CALL. YOUR FEEDBACK IS VITALTO BLACK & DECKER.

HAN K

CHO O SI

CHO O

SIN G

LAC K

LAC

&&D

ECK ER

Cataloge Numbers CDC14K2-XE,CDC18K2-XE CDC14GK2-XE,CDC18GK2-XE

90504485 CDC9602,CDC1200 etc 6/19/06 10:39 AM Page 1

General Safety Rules

WARNING! Read all instructions. Failure to follow all instructions listed below

may result in electric shock, fire and/or serious injury. The term “power tool” in all of

the warnings listed below refers to your mains-operated (corded) power tool or

battery-operated (cordless) power tool.

SAVE THESE INSTRUCTIONS

1) Work area safety a) Keep work area clean and well lit.

Cluttered or dark areas invite accidents.

b) Do not operate power tools in explosive atmospheres, such as in the presence

of flammable liquids, gases or dust

. Power tools create sparks which may ignite

the

dust or fumes.

c) Keep children and bystanders away while operating a power tool.

Distractions

can

cause you to lose control

2) Electrical safety a) Power tool plugs must match the outlet. Never modify the plug in any way. Do

not use any adapter plugs with earthed (grounded) power tools.

Unmodified

plug

s and matching outlets will reduce risk of electric shock

b) Avoid body contact with earthed or grounded surfaces such as pipes,

radiators,

ranges and refrigerators.

There is an increased risk of electric shock if

your

body is earthed or grounded.

c) Do not expose power tools to rain or wet conditions.

Water entering a power tool

will

increase the risk of electric shock

d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging

the

power tool. Keep cord away from heat, oil, sharp edges or moving parts.

Damaged or entangled cords increase the risk of electric shock.

e) When operating a power tool outdoors, use an extension cord suitable for

outdoor use.

Use of a cord suitable for outdoor use reduces the risk of electric

shock.

3) Personal safety a) Stay alert, watch what you are doing and use common sense when operating a

power

tool. Do not use a power tool while you are tired or under the influence

drugs, alcohol or medication.

A moment of inattention while operating power tool

may

result in serious personal injury.

b) Use safety equipment. Always wear eye protection.

Safety equipment such as

dust

mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate

conditions

will reduce personal injuries.

c) Avoid accidental starting. Ensure the switch is in the off-position before

plugging in.

Carrying power tools with your finger on the switch or plugging in power

tools

that have the switch on invites accidents.

d) Remove any adjusting key or wrench before turning the power tool on.

wrench

or a key left attached to a rotating part of the power tool may result in

personal

injury.

e) Do not overreach. Keep proper footing and balance at all times.

This enables

better

control of the power tool in unexpected situations.

f) Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing

and

gloves away from moving parts.

Loose clothes, jewelry or long hair can be

caught

in moving parts. Air vents often cover moving parts and should also be

avoided.

g) If devices are provided for the connection of dust extraction and collection

facilities,

ensure these are connected and properly used.

Use of these devices

can

reduce dust-related hazards.

4) Power tool use and care a) Do not force the power tool. Use the correct power tool for your application.

90504485 CDC9602,CDC1200 etc 6/19/06 10:39 AM Page 2

The correct power tool will do the job better and safer at the rate for which it was designed

b) Do not use the power tool if the switch does not turn it on and off.

Any power

tool

that cannot be controlled with the switch is dangerous and must be repaired.

c) Disconnect the plug from the power source and/or the battery pack from the

power

tool before making any adjustments, changing accessories, or storing

power

tools.

Such preventive safety measures reduce the risk of starting the power

tool

accidentally.

d) Store idle power tools out of the reach of children and do not allow persons

unfamiliar

with the power tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained users.

e) Maintain power tools. Check for misalignment or binding of moving parts,

breakage

of parts and any other condition that may affect the power tools

operation.

If damaged, have the power tool repaired before use.

Many accidents

are

caused by poorly maintained power tools.

f) Keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp

cutting

edges are less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc., in accordance with these

instructions

and in the manner intended for the particular type of power tool,

taking

into account the working conditions and the work to be performed.

Use of the power tool for operations different from those intended could result in a ha

zardous situation.

5) Battery tool use and care a) Ensure the switch is in the off position before inserting battery pack.

Inserting

the

battery pack into power tools that have the switch on invites accidents.

b) Recharge only with the charger specified by the manufacturer.

A charger that is

suitable

for one type of battery pack may create a risk of fire when used with another

battery

pack.

c) Use power tools only with specifically designated battery packs. Use of any

other

battery packs may create a risk of injury and fire.

d) When battery pack is not in use, keep it away from other metal objects like

paper

clips, coins, keys, nails, screws, or other small metal objects that can

make

a connection from one terminal to another.

Shorting the battery terminals

together

may cause burns or a fire.

e) Under abusive conditions, liquid may be ejected from the battery, avoid contact.

contact accidentally occurs, flush with water. If liquid contacts eyes,

additionally

seek medical help.

Liquid ejected from the battery may cause irritation

burns.

6) Service a) Have your power tool serviced by a qualified repair person using only identical

replacement

parts.

This will ensure that the safety of the power tool is maintained.

SPECIFIC SAFETY RULES

• Wear ear protectors with impact drills. Exposure to noise can cause hearing loss.

• Hold tool by insulated gripping surfaces when performing an operation where the

cutting

tool may contact hidden wiring or its own cord. Contact with a "live" wire will

make

exposed metal parts of the tool "live" and shock the operator.

• When working on a ladder or on scaffolding be sure to lay the tool down on its side

when not in use. Some tools with large battery packs will stand upright but may be easily knocked over.

• Use clamps or another practical way to secure and support the work piece to a

stable platform. Holding the work by hand or against your body leaves it unstable and may lead to loss of control.

WARNING: Some dust created by power sanding, sawing, grinding, drilling, and

other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

90504485 CDC9602,CDC1200 etc 6/19/06 10:39 AM Page 3

• lead from lead-based paints,

• crystalline silica from bricks and cement and other masonry products, and

• arsenic and chromium from chemically-treated lumber (CCA). Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

• Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling, and other construction activities. Wear protective clothing and wash exposed areas with soap and water. Allowing dust to get into your mouth, eyes, or lay

on the skin may promote absorption of harmful chemicals.

WARNING: Use of this tool can generate and/or disperse dust, which may cause serious and permanent respiratory or other injury. Always use NIOSH/OSHA

approved respiratory protection appropriate for the dust exposure. Direct particles away from face and body.

The

label on your tool may include the following symbols.

V ..........................volts A..........................amperes

Hz ........................hertz W ........................watts

min ........................minutes ......................alternating

current

......................direct current

o ........................no load speed

..........................

Class II Construction

........................earthing

terminal

........................safety alert symbol .../min ..................revolutions or

reciprocations per

minute

FUNCTIONAL DESCRIPTION

1. Variable speed switch

2. Forward/reverse slider

3. Torque adjustment collar

4. Chuck

5. Battery

90504485 CDC9602,CDC1200 etc 6/19/06 10:39 AM Page 4

BATTERY CAP INFORMATION FIGURE A (Page 5)

Battery pack storage and carrying caps (1) are provided for use whenever the battery pack is out of the tool or charger. Remove cap before placing battery pack in charger or tool.

WARNING: Do not store or carry battery pack so that metal objects can contact exposed battery pack terminals. For example, do not place battery pack in aprons, pockets, tool boxes, product kit boxes, drawers, etc. with loose nails, screws, keys, etc. without battery cap. Transporting batteries can possibly cause fires if the battery pack terminals inadvertently come in contact with conductive materials such as keys, coins, hand tools and the like. The US Department of Transportation Hazardous Material Regulations (HMR) actually prohibit transporting batteries in commerce or on airplanes (i.e. packed in suitcases and carryon luggage) UNLESS they are properly protected from short circuits. So when transporting individual batteries, make sure that the battery pack

terminals cause

are protected and well insulated from materials that could contact them and

a short circuit.

+ 7 hidden pages