Black & Decker Br950 Instruction Manual [it]
Powerful Solutions
TM
BR925L
BR950
www.blackanddecker.eu
English (Original instructions) 4
Italiano (Traduzione del testo originale) 10
Ελληνικά (Μετάφραση των πρωτότυπων οδηγιών)17
2
3
ENGLISH
ENGLISH
!
Intended use
Your Black & Decker pressure steam
ironing system has been designed for
ironing garments made of linen, cotton,
silk, wool and synthetic materials. This
product is intended for household use
only.
General appliance safety warnings
Warning! When using mains-
powered/cordless appliances,
basic safety precautions,
including the following, should
always be followed to reduce the
risk of fire, electric shock, personal injury
and material damage.
Read all of this manual carefully
before using the appliance.
The intended use is described in this
manual. The use of any accessory or
attachment or the performance of
any operation with this appliance
other than those recommended in
this instruction manual may present
a risk of personal injury.
The term "appliance" in the warnings
refers to your mains-operated (corded)
appliance or battery-operated (cordless)
appliance.
Save all warnings and instructions for
future reference.
Using your appliance
Always take care when using the
appliance.
Keep work area clean and well lit.
Cluttered or dark areas invite
accidents.
Only use the appliance in daylight or
good artificial light.
Do not operate your appliance in
explosive atmospheres, such as in
the presence of flammable liquids,
gases or dust.
Never allow children or people
unfamiliar with the in structions to use
the appliance.
Do not allow children or animals to
come near the work area or touch the
appliance supply cord.
Keep children, bystanders and
animals away while operating an
appliance. Distractions can cause
you to lose control.
The appliance is not to be used as a
toy.
Do not immerse the appliance in
water.
Do not open body casing. There are
no user-serviceable parts inside.
Personal safety
Stay alert, watch what you are doing
and use common sense when
operating an appliance. Do not use
an appliance while you are tired or
under the influence of drugs, alcohol
or medication. A moment of
inattention while operating an
appliance may result in serious
personal injury.
Where required, use personal
protective equipment. Protective
equipment such as eye protection,
dust mask, non-skid safety shoes,
hard hat, or hearing protection used
for appropriate conditions will reduce
personal injuries.
Prevent unintentional starting.
Ensure the switch is in the offposition before connecting to power
source and/or battery pack, picking
up or carrying the appliance.
Carrying appliances with your finger
on the switch or energising
appliances that have the switch on
invites accidents.
Do not overreach. Keep proper
footing and balance at all times. This
enables better control of the
appliance in unexpected situations.
Dress properly. Do not wear loose
clothing or jewellery. Keep your hair,
clothing and gloves away from
moving parts. Loose clothes,
jewellery or long hair can be caught
in moving parts.
Appliance use and care
Before use, check the appliance for
damaged or defective parts. Check
for breakage of parts, damage to
4
ENGLISH
switches and any other conditions
that may affect its operation.
Do not use the appliance if the switch
does not turn it on and off. Any
appliance that cannot be controlled
with the switch is dangerous and
must be repaired.
Disconnect the plug from the power
source and/or the battery pack from
the appliance before making any
adjustments, changing accessories,
or storing appliances. Such
preventive safety measures reduce
the risk of starting the appliance
accidentally.
Where applicable, keep cutting tools
sharp and clean. Properly
maintained cutting tools with sharp
cutting edges are less likely to bind
and are easier to control.
Do not use the appliance if any part
is damaged or defective.
Have any damaged or defective
parts repaired or replaced by an
authorised repair agent.
Never attempt to remove or replace
any parts other than those specified
in this manual.
Electrical safety
Appliance plugs must match the
outlet. Never modify the plug in any
way. Do not use any adapter plugs
with earthed (grounded) appliance.
Unmodified plugs and matching
outlets will reduce risk of electric
shock.
Do not expose appliance to rain or
wet conditions. Water entering a
appliance will increase the risk of
electric shock.
Do not abuse the cord. Never use the
cord for carrying, pulling or
unplugging the appliance. Keep cord
away from heat, oil, sharp edges or
moving parts. Damaged or
entangled cords increase the risk of
electric shock.
When operating an appliance
outdoors, use an extension cord
suitable for outdoor use. Use of a
cord suitable for outdoor use reduces
the risk of electric shock.
If operating an appliance in a damp
location is unavoidable, use a
Residual Current Device (RCD)
protected supply. Use of an RCD
reduces the risk of electric shock.
Battery tool use and care (cordless
appliance only)
Recharge only with the charger
specified by the manufacturer. A
charger that is suitable for one type
of battery pack may create a risk of
fire when used with another battery
pack.
Use appliances only with specifically
designated battery packs. Use of any
other battery packs may create a risk
of injury and fire.
When battery pack is not in use,
keep it away from other metal
objects, like paper clips, coins, keys,
nails, screws or other small metal
objects that can make a connection
from one terminal to another.
Shorting the battery terminals
together may cause burns or a fire.
Under abusive conditions, liquid may
be ejected from the battery; avoid
contact. If contact accidentally
occurs, flush with water. If liquid
contacts eyes, additionally seek
medical help. Liquid ejected from the
battery may cause irritation or burns.
After use
When not in use, the appliance
should be stored in a dry, well
ventilated place out of the reach of
children.
Children should not have access to
stored appliances.
When the appliance is stored or
transported in a vehicle it should be
placed in the boot or restrained to
prevent movement following sudden
changes in speed or direction.
5
ENGLISH
Service
!
Have your appliance serviced by a
qualified repair person using only
identical replacement parts. This will
ensure that the safety of the
appliance is maintained.
Additional safety instructions for
pressure steam ironing systems
Read all of this manual carefully
before using your appliance.
Always check that the power supply
corresponds to the voltage on the
rating plate.
Make sure that the mains socket is
earthed. The manufacturer and
dealer cannot accept responsibility
for any problems caused by incorrect
wiring.
Always unplug the appliance before
filling the boiler reservoir.
Always unplug the appliance and
place the iron on the iron stand when
not in use.
Do not put the hot iron on the cord.
Do not let the cord come into contact
with the hot sole plate.
Do not put vinegar or water softeners
in the boiler reservoir. Only use
water.
Always use the filler jug to fill the
boiler reservoir.
Never immerse the appliance in
liquid.
Keep all parts of the appliance dry. If
they should become wet, wait until
they are completely dry before use.
Do not leave the appliance
unattended, especially when it is hot
or near children.
Warning! Do not leave the appliance
unattended while it is connected to the
power supply and during the cool down
period.
Warning symbols
The following symbols are used in this
manual:
Surfaces may become hot during
use and during the cool down
period.
Denotes risk of personal injury or
damage to the product in case of
non-observance of the
instructions in this manual.
Denotes risk of electric shock.
Safety
This appliance has the following safety
features:
Boiler pressure control switch.
Boiler filler cap with safety valve to
prevent excess pressure in the
boiler.
Safety thermostats.
Safety valve on the injection pump.
Safety of others
This appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience
and knowledge, unless they have
been given supervision or instruction
concerning use of the appliance by a
person responsible for the their
safety.
Children should be supervised to
ensure that they do not play with the
appliance.
Electrical safety
This product must be earthed.
Always check that the power
supply corresponds to the
voltage on the rating plate.
Power plugs must match the o utlet. Never
modify the plug in any way. Unmodified
plugs and matching outlets will reduce
risk of electric shock.
6
ENGLISH
Extension cables
A 3 core cable must be used as your
tool is earthed.
To avoid the risk of electric
shock, do not immerse the cord,
plug or appliance in water or
other liquid.
Features
This appliance includes some or all of the
following features:
1. Steam discharge button
2. Steam button lock
3. Iron at-temperature light
4. Steam discharge trigger
5. Iron thermostat knob
6. Filler jug
7. Boiler filler cap
8. Iron stand
9. Iron on/off switch
10. Variable steam control
11. Boiler on/off switch
12. Steam ready indicator light
13. Empty water tank indicator light
Use
Surfaces may become hot in
use.
The filler cap may be hot during
use and during the cool down
period.
Initial filling of the boiler (fig. A and B)
Warning! Make sure that the appliance is
switched off and unplugged.
Unscrew and remove the cap (7).
Note: When filling the boiler, use tap
water only.
Use the filler jug (6) to fill the boiler
reservoir with water, take care not to
spill any water.
Replace the boiler filler cap (7), do
not overtighten.
Plug the mains plug into the power
supply.
Switch the iron on/off switch (9)
on. The light in the switch will come
on.
Switch the boiler on/off switch (11)
on. The light in the switch will
come on.
Note: When the iron is used for the first
time there may be a little smoke or a few
drops of water. This is normal because
some parts of the iron are lubricated and
sealed. It will soon stop.
Warning! This appliance must be placed
on the stand (8) when not in use.
Warning! When placing the iron on its
stand, make sure that the surface on
which the stand is placed is stable.
Warning! Do not press the steam
discharge trigger (4) or button (1) if the
steam ready indicator light (12) is off or if
the iron is not heated correctly as this
could cause water to come out of the
holes in the sole plate.
To release the steam, wait until the
steam ready indicator light (12) on
the control panel is on.
Set the iron thermostat knob (5) to
‘steam’.
When the required temperature has
been reached the iron at-
temperature light (3) will go out. This
light will go on and off in use; this is
normal.
Press the steam discharge button (1)
on the iron handle or press the steam
discharge trigger (4). Do not use the
first jets of steam.
The steam discharge button (1) on
the iron handle can be locked if
required by sliding the steam button
lock (2) back. Unlock the steam
discharge button by sliding the steam
button lock (2) forward.
Filling the boiler during ironing
The boiler will need refilling with water
when no more steam is produced and the
empty water tank indicator light (13) is on.
Warning! Never loosen the boiler filler
cap while the appliance is plugged in.
Warning! Never loosen the boiler filler
cap while ironing.
To fill the boiler:
7
ENGLISH
Switch the boiler on/off switch (11)
off. The light in the switch will
go off.
Continue ironing until all the steam
has been released.
Switch the iron on/off switch (9)
off. The light in the switch will go off.
Unplug the appliance.
Carefully unscrew slightly but do not
remove the boiler filler cap (7).
Wait until the hissing of the residual
steam has stopped and remove the
boiler filler cap (7) very carefully,
taking care as the steam and the
boiler filler cap (7) can be very hot
and could cause burns or scalding.
Use the filler jug (6) and slowly and
carefully fill the boiler with water.
Fit the boiler filler cap (7), tightening
well.
Instructions for dry ironing
For dry ironing (without steam), plug
in the appliance and Switch the iron
on/off switch (9) to on. The light
in the switch will come on.
Regulate the temperature by
adjusting the thermostat knob (5) for
the fabric to be ironed.
Fabric chart
Acetate
acrylic
nylon
polyester
rayon
Silk
Wool
cotton
fine linen
Cotton
Linen
starched clothes
Cleaning and maintenance
Warning! Switch the appliance off and
unplug it before cleaning or maintenance.
Occasionally rinse the boiler with tap
water until it runs clear. Do not use
chemical additives.
Mains plug replacement (U.K. &
Ireland only)
If a new mains plug needs to be fitted:
Safely dispose of the old plug.
Connect the brown lead to the live
terminal in the new plug.
Connect the blue lead to the neutral
terminal.
Connect the green/yellow lead to the
earth terminal.
Warning! Follow the fitting instructions
supplied with good quality plugs.
Recommended fuse: 13 A.
Protecting the environment
Separate collection. This
product must not be disposed of
with normal household waste.
Should you find one day that your
appliance needs replacement, or if it is of
no further use to you, think of the
protection of the environment. Black &
Decker repair agents will accept old Black
& Decker tools and ensure that they are
disposed of in an environmentally safe
way.
Separate collection of used
products and packaging allows
materials to be recycled and
used again. Re-use of recycled
materials helps prevent
environmental pollution and
reduces the demand for raw
materials.
Local regulations may provide for
separate collection of electrical products
from the household, at municipal waste
sites or by the retailer when you purchase
a new product.
Black & Decker provides a facility for the
collection and recycling of Black & Decker
products once they have reached the end
of their working life. To take advantage of
this service please return your product to
8
ENGLISH
any authorised repair agent who will
collect them on our behalf.
You can check the location of your
nearest authorised repair agent by
contacting your local Black & Decker
office at the address indicated in this
manual. Alternatively, a list of authorised
Black & Decker repair agents and full
details of our after-sales service and
contacts are available on the Internet at:
www.2helpU.com.
Technical data
BR925L
TYPE 1
BR950
TYPE 1
Voltage Vdc 230 230
Power input W 1900 2100
Weight kg 4 4
Guarantee
Black & Decker is confident of the quality
of its products and offers an outstanding
guarantee. This guarantee statement is in
addition to and in no way prejudices your
statutory rights. The guarantee is valid
within the territories of the Member States
of the European Union and the European
Free Trade Area.
If a Black & Decker product becomes
defective due to faulty materials,
workmanship or lack of conformity, within
24 months from the date of purchase,
Black & Decker guarantees to replace
defective parts, repair products subjected
to fair wear and tear or replace such
products to make sure of the minimum
inconvenience to the customer unless:
The product has been used for trade,
professional or hire purposes.
The product has been subjected to
misuse or neglect.
The product has sustained damage
through foreign objects, substances
or accidents.
Repairs have been attempted by
persons other than authorised repair
agents or Black & Decker service
staff.
To claim on the guarantee, you will need
to submit proof of purchase to the seller
or an authorised repair agent. You can
check the location of your nearest
authorised repair agent by contacting
your local Black & Decker office at the
address indicated in this manual.
Alternatively, a list of authorised Black &
Decker repair agents and full details of
our after-sales service and contacts are
available on the Internet at:
www.2helpU.com
Please visit our website
www.blackanddecker.co.uk to
register your new Black & Decker product
and to be kept up to date on new products
and special offers. Further information on
the Black & Decker brand and our range
of products is available at
www.blackanddecker.co.uk.
9
Loading...