Black & Decker Acv1205t Instruction Manual

www.blackanddecker.co.uk
1
2
4 5
3
UK
Ireland
Australia
New Zealand
1
6
4
A
C
13
7
B
D
12
11
2
E
10
14
F
2
3
1
G
I
H
15
16
3
Intended use
Your Black & Decker Dustbuster® auto car vacuum cleaner has been designed for light dry vacuum cleaning purposes.The appliance is powered from a car electrical system and connected by the cigarette lighter socket. This product is intended for domestic use only.
Safety instructions
Warning! When using electrical
appliances, basic safety precautions, including the following, should always be followed to reduce the risk of fire, personal injury and material damage.
Read all of this manual carefully
before using the appliance.
The intended use is described in this
manual. The use of any accessory or attachment or the performance of any operation with this appliance other than those recommended in this instruction manual may present a risk of personal injury.
Retain this manual for future
reference.
Using your appliance
Do not use the appliance to pick up
liquids or any materials that could catch fire.
Do not use the appliance near
flammable fumes.
Do not use the appliance near water.
Do not immerse the appliance in water.
Never pull the power lead to
disconnect the plug from the cigarette lighter socket. Keep the lead away from heat, oil and sharp edges.
Be careful not to pinch the lead in
the vehicle’s doors, windows or levers.
After use
When not in use, the appliance
should be stored in a dry place. Children should not have access to stored appliances.
Inspection and repairs
Before use, check the appliance for
damaged or defective parts. Check for breakage of parts, damage to switches and any other conditions that may affect its operation.
Do not use the appliance if any part
is damaged or defective.
Have any damaged or defective parts
repaired or replaced by an authorised repair agent.
Regularly check the power lead for
damage. Replace the lead if it is damaged or defective.
Never attempt to remove or replace
any parts other than those specified in this manual.
Electrical safety
The appliance is designed for use with 12 V negative ground vehicle battery systems. Warning! Do not operate the appliance with systems which have positive ground or a different voltage.
Features
1. On/off switch
2. Release button
3. Dust bowl
4. Cigarette lighter connector
5. Brush head
Fig. A
6. Crevice tool
7. Brush tool
Assembly
Fitting the brush head (fig. C)
The brush head (5) allows for vacuuming on cut pile carpeting. The brush is particularly useful for picking up hair, threads, etc.
Insert the brush into the front of the
appliance.
Insert the jack plug (8) into the
connector (9) as shown.
4
Fitting the accessories (fig. A & D)
The appliance is supplied with the following accessories:
– a crevice tool (6) for confined spaces – a hard brush (7) for upholstery
To fit an accessory, proceed as follows:
Take the accessories from the
appliance.
Insert the appropriate accessory into
the front of the appliance.
Additional accessories (fig. D, E & F)
– an extension hose (10) and a hose
connector (11) – a brush (12) for carpets and upholstery – an extended crevice tool (13) for the
most difficult to reach areas.
When not in use, the appliance and the accessories can be stored in the storage bag (14).
To fit an accessory, proceed as follows:
Fit the hose connector onto the nose
of the appliance.
Attach one end of the hose to the
connector.
Attach the appropriate accessory to
the other end of the hose.
Use
Connecting to the vehicle’s power supply (fig. B)
Make sure that the appliance is
switched off.
Remove the cigarette lighter from
the socket.
Plug the connector (4) into the
cigarette lighter socket.
Operating the appliance (fig. G)
To switch on, slide the on/off switch
(1) forward.
To switch off, slide the on/off switch
back.
The appliance can be used for periods of up to 30 minutes without noticeably affecting the power of a normally charged car battery in good condition. Warning! Extended use will drain the battery power.
Do not run the vehicle’s engine while cleaning. This can shorten the life of the appliance.
Cleaning and maintenance
Warning! Regularly clean the filters.
Cleaning the dust bowl and filters (fig. H & I)
The filters are re-usable and should be cleaned regularly.
Press the release button (2) and
remove the dust bowl (3).
Empty the dust bowl (fig. H).
Remove the filters (15 & 16) by
twisting them clockwise.
Brush any loose dust off the filters.
Wash the filters in warm, soapy
water. The bowl can also be washed if necessary. Do not immerse the appliance in water.
Make sure the dust bowl and filters
are dry.
Refit the filters (15 & 16) onto the
appliance, twisting them counterclockwise until they lock into place.
Refit the dust bowl onto the
appliance. Make sure the dust bowl clicks into place.
Warning! Never use the appliance without the filters. Optimum dust collection will only be achieved with clean filters and an empty dust bowl.
Replacing the filters
The filters should be replaced every 6 to 9 months and whenever worn or damaged. Replacement filters are available from your Black & Decker dealer (cat. no. VF40).
Remove the old filters as described
above.
Fit the new filters as described above.
Protecting the environment
Separate collection. This product must not be disposed of with normal household waste.
5
Should you find one day that your Black & Decker product needs replacement, or if it is of no further use to you, do not dispose of it with household waste. Make this product available for separate collection.
Separate collection of used products and packaging allows materials to be recycled and used again. Re-use of recycled materials helps prevent environmental pollution and reduces the demand for raw materials.
EC declaration of conformity
Black & Decker declares that these
72/245/EEC amended to 95/54/EC &
LpA (sound pressure) 80 dB(A), hand/arm
Spennymoor, County Durham DL16 6JG,
ACV1205T
products conform to:
70/156/EEC, EN 60335
weighted vibration < 2.5 m/s
2
Kevin Hewitt
Director of Consumer Engineering
United Kingdom
1-6-2006
Local regulations may provide for separate collection of electrical products from the household, at municipal waste sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and recycling of Black & Decker products once they have reached the end of their working life. To take advantage of this service please return your product to any authorised repair agent who will collect them on our behalf.
You can check the location of your nearest authorised repair agent by contacting your local Black & Decker office at the address indicated in this manual. Alternatively, a list of authorised Black & Decker repair agents and full details of our after-sales service and contacts are available on the Internet at:
www.2helpU.com
Technical data
ACV1205T
Voltage V 12 Weight kg 1.3
Guarantee
Black & Decker is confident of the quality of its products and offers an outstanding guarantee. This guarantee statement is in addition to and in no way prejudices your statutory rights. The guarantee is valid within the territories of the Member States of the European Union and the European Free Trade Area.
If a Black & Decker product becomes defective due to faulty materials, workmanship or lack of conformity, within 24 months from the date of purchase, Black & Decker guarantees to replace defective parts, repair products subjected to fair wear and tear or replace such products to ensure minimum inconvenience to the customer unless:
The product has been used for trade,
professional or hire purposes;
The product has been subjected to
misuse or neglect;
The product has sustained damage
through foreign objects, substances or accidents;
Repairs have been attempted by
persons other than authorised repair agents or Black & Decker service staff.
6
To claim on the guarantee, you will need to submit proof of purchase to the seller or an authorised repair agent. You can check the location of your nearest authorised repair agent by contacting your local Black & Decker office at the address indicated in this manual. Alternatively, a list of authorised Black & Decker repair agents and full details of our after-sales service and contacts are available on the Internet at:
www.2helpU.com
Please visit our website www.blackanddecker.co.uk to register your new Black & Decker product and to be kept up to date on new products and special offers. Further information on the Black & Decker brand and our range of products is available at
www.blackanddecker.co.uk
7
Australia
Black & Decker (Australia) Pty. Ltd. Tel. 03-8720 5100 20 Fletcher Road, Mooroolbark, Victoria, 3138 Fax 03-9727 594065
New Zealand
Black & Decker Tel. 09 579 7600 81 Hugo Johnston Drive Fax 09 579 8200 Penrose, Auckland, New Zealand
United Kingdom
Black & Decker Tel. 01753 511234 210 Bath Road Fax 01753 551155 Slough, Berkshire SL1 3YD Helpline 01753 574277
90504915
8
06/06
Loading...