B&K Precision 310 Datasheet

Data Sheet

Digital Milli-Ohm Meter

Model 310

The model 310 Digital Milli-Ohm Meter is used
to ensure continuity and integrity of a wire,
cable, conduit or any electrical connection. The
310 has a display resolution of 100 micro-ohms
and has a professional four wire Kelvin test lead
set included to ensure accurate readings. The
heavy duty case has a rubber seal to make the
unit water resistant and a convenient shoulder
strap.

Features & Benefits

■ Four wire Kelvin lead measurements

■ Over-voltage and over-temperature protection

■ 5 ranges with 100 µΩ max. resolution

■ Water resistant case with shoulder strap

■ Auto Power Off

■ IEC/EN 61010-1 / CE

■ Included: 4-wire Kelvin leads, carrying case

with shoulder strap and batteries

Specifications 310

lectrical

E

0-200.0 mΩ in steps of 100 µΩ

Measuring ranges

Accuracy

Test current

Test current accuracy ±0.3%

Protection fuses

Safety

Mechanical

Bump test IEC68-2-29

Vibration test IEC1010, clause 8.3

Drop test IEC1010, clause 8.4

Impact test IEC1010, Clause 8.2

Rated environmental

conditions

0-2000 mΩ in steps of 1 mΩ
0-20.00 Ω in steps of 10 mΩ

0-200.0 Ω in steps of 100 mΩ

0-2000 Ω in steps of 1 Ω

±0.5% of reading ±2 digits over the operating

temperature range -15° C to +55° C,

with the supplied test leads.

1 mA => 2000 Ω range

10 mA => 200 / 20 Ω ranges

100 mA => 2000 m / 200 mΩ ranges.

Supply: 1.5 A, HBC, 5 x 20 mm, DIN

Current: 1 A, HBC, 5 x 20 mm, DIN

Voltage: 0.5 A, HBC, 5 x 20 mm, DIN

LVD BS EN 61010-1

EMC BS EN 50081-1, BS EN 50082-1

Indoor use

Pollution degree 2

Altitude up to 2000 meter

Relative humidity 80% max.

Ambient temperature 0°C~40° C

One Year Warranty

Weight 3.4 lbs (1.542 kg)

Dimensions (WxHD) 9.82” x 4.33” x 7.48” (250 x 110 x 190 mm)

Applications

The model 310 Digital milli-ohm meter, with its measuring range of 100 µΩ
to 2000 Ω, is suitable for a wide range of applications such as:

- Measuring the winding resistance of electric motors, generators and transformers

- Bond testing in mines, aircraft, railways, ships, domestic and industrial wiring
installations

- Measuring the ring main continuity testing in industrial and domestic wiring i
installations

- Measuring resistance in electronic equipment such as shunts, pcb tracks, switch
and relay resistance

- Checking compression joints on overhead lines

- Testing and maintenance of switchboard /sub-station equipment on such items
as fuses, joints, contacts and bonds

Technical data subject to change
© B&K Precision Corp. 2012

v0913122012

www.bkprecision.com