B&K Precision 301 Datasheet

B&K Precision Corporation

22820 Savi Ranch Parkway, Yorba Linda, CA 92887
Tel: [phone], Fax: [phone]
www.bkprecision.com

Specifications subject to change without notice

Data Sheet

Model 301

AC Line Separator

AC Line Separator

Model 301

The 301 is intended to be used with an AC Current Clamp Meter.
It provides temporary separation of conductors to facilitate meas­urement of current. Most 120Vac devices use a two conductor
power cord which makes it difficult to isolate a single conductor to
make a current measurement. A single conductor is required to
make a measurement because a two conductor measurement will
cancel each other out.

Features

■ X10 Mode allows for more accurate measurements

of low amperage devices

■ Direct reading in X1 mode

■ 2mm Voltmeter measurement points

■ Integrated ground conductor (three pronged US

standard plug)

■ 15 amp capacity

Applications

■ Monitor a devices power consumption

■ Measure surge current