B&K GP68 User Manual

B&K Components, Ltd.

GP68

Bi-Directional RJ45 to Eight Position

Phoenix Module

User Manual

14198 051607

User Manual - GP68 © 2007 B&K Components Ltd. All rights reserved.

The information in this manual is copyright protected. No part of this manual may be copied or reproduced in any form without prior written
consent from B&K Components, Ltd. B&K Components Ltd. SHALL NOT B E LIABLE FOR OPERATIONAL, TECHNICAL OR EDITORIAL
ERRORS/OMISSIONS MADE IN THIS MANUAL. The information in this manual is subject to change without prior notice.

Limited Warranty
B&K Components Ltd., referred to herein as B&K, warr ants your B&K equipment against all defects in material and workmanship for a period of
five years from the date of purchase. This warranty applies only to the original purchaser and only to equipment in normal residential us e and
service. Defective equipment must be returned to B&K, prepaid , accompanied by proof of purchase and sufficient payment to cover the cost of
return shipping and handling, and will be repaired or replaced at the discretion of B&K whose decision as to the method of reparation will be
final.

This warranty shall not apply to any equipment which is found to have been impro perly installed, incorrectly fused, misused, abused, or sub­jected to harmful elements, used in any way not in accordanc e with instructions supplied with the unit, or to have been modified, repaired or
altered in any way without the expressed, written consent of B& K. This warranty does not apply to the cabinet or appearance items such as the
faceplate or control buttons, nor does it cover any expenses in curred in shipping the unit to and from the manufacturer's service department.

This warranty on B&K Components, Ltd. products is NOT VALID if the products hav e been purchased from an unauthorized dealer or an E­tailer or if the original factory serial number has been remov ed, defaced or replaced in any way. B&K Components, Ltd. sells its products
through authorized dealers in order to ensure that consumers obtain proper dealer service and support. Buying from an authorized B&K
Components, Ltd. dealer insures that you have a FACTORY WARRANTY on your B&K Compone nts, Ltd. product. If you have any questions
concerning your Factory Warranty call
B&K Components, Ltd. at 716-656-0026.

THE EXPRESS FACTO RY WARRANTY HEREIN CONTAI NED IS IN LIEU OF ANY AND ALL OTHE R WARRANTIES, EXPRESSED OR
IMPLIED, INCLUDI NG ANY WARRANTY OF MERCHANT ABILITY, UPGRADEABILITY OR OF FITNESS FOR ANY PARTICULA R PUR­POSE. B&K COMPONENTS, LTD. SHALL NOT UNDER ANY CIRCUMSTANCES BE LIABLE FOR DAMAGES, INCLUDING SPECIAL,
INCIDENTAL, EXE MPLARY, PUNITIVE OR CONSEQ UENTIAL DAMAGES ARISING OUT OF OR IN CONNECTION WITH TH E PURCHASE,
USE OR PERFORMANCE OF ANY B&K PRODUCT.

This warranty gives you specific legal rights. You may also hav e other rights which vary from State to State. Some States do not allow the
exclusion or limitation of incidental or consequential dam ages and the foregoing exclusions may not apply to you. No agent, representative,
dealer or employee of B&K has the authority to increase or alter the o bligations or terms of this warranty.

Returning Equipment
No equipment may be returned to B&K Components Ltd. witho ut a RETURN AUTHORIZATION (RA). Should you find it necessary to return
equipment to B&K, for any reason, a RETURN AUTHORIZATION (RA) number mu st be issued by B&K in respect to the equipment being
returned. You may request an RA number by calling B&K at th e numbers below. We will need the following information to issue your RA
number. Please have it ready before you call.

1. Your name, address, and phone number.

2. The model and serial number of the equipment being returned.

3. A description of the problem being experienced.

4. Your sales receipt.

Your call will be referred to a Technical Service Representat ive who will work with you to resolve the problem. If it is determined that the unit
must be returned for repair, an RA number will be issued.

SIMPLY BETTER! is a registered trademark of B&K Compon ents, Ltd.

Accessories Included
1– Users Manual
4– Felt Feet

The GP68 is a multi-purpose, bi-directional, passive device that converts eight RJ45 inputs each into a matching
eight-positional phoenix terminal block connector.

1. Box Chassis Configuration - The GP68 is a floor box design (F) for use on a shelf or mounting behind a rack.

2. RJ45 Connec tions—Six standard eight pin RJ45 connections labeled A through F for easy connection to the

corresponding eight position phoenix adapters. Pin 1 would be located on the upper section of the RJ45 connec­tion.

3. Phoenix Adapters— Six eight position phoenix adapters labeled A through F for easy connections to the
corresponding RJ45 adapters. Pin 1 would be located on the lower section of the phoenix connection.

Phoenix Adapters
Six eight position ph oenix adapters labeled A through F for easy
connections to the corresponding RJ45 adapters. Pin 1 would be lo­cated on the lower section of the phoenix connection.

RJ45 Connection s
Six standard eight pin RJ45 connections labeled A through F for easy
connection to the corresp onding eight position phoe nix adapter s. Pin 1
would be located on the upper section of the RJ45 connection.

Rear Panel Decora and Box Configuration Summary

A use of the GP68 breakout box is to increase the command and capacity of CT products, allowing for multiple
control systems for one zone. Shown below is an IR receiver and keypad connected to control the same zone, in
this case Zone D. In this instance, the IR receiver would use the pin configuration of the IR input on the CT
receiver, in this case using pin 2 for DATA and pin 3 for ground. The keypad uses pin 1 for +12V power, pin 2
for DATA, pin 3 for ground, pin 5for RS-232 status and pin 7 for 12V CTRL (control light on keypad).

Connection to a IR receiver and keypad to the CT Receiver

1.

2.

3.

Front Panel Box Configuration Summary

For use of up to 50 feet of CAT-5 cable, the GP68 is a passive device and does not need to be powered.

Front of GP6 8 breakout box

Back of GP68 breakout box

IR Receptor

Zone Control I./O on the CT

CK 1.1 Keypad