The ENSO MESH is the latest addition to ENSO chassis
series. ENSO MESH not only presents BitFenix simple beauty
PC concept with the latest AURA SYNC 3 pin addressable
RGB LED technology and also offers the best cooling
performance with its High density mesh front design. The core
of the ENSO MESH is its clean design, well balanced between
a perfectly organized interior structure and the sleek exterior
design. It is complemented by a tempered glass side panel
and the latest in RGB illumination effects, highlighting the
clean and discreet lines of the High density mesh front panel.
The clean design concept is well balanced between a perfectly organized
interior structure and a sleek exterior design. It is complemented by a 4mm
see-through-tinted tempered glass panel on the side and addressable
RGB illumination surrounding the High density mesh front.
Sleek Design With Mesh Front Panel
The BitFenix ENSO MESH premieres BitFenix new RGB illumination. The
addressable RGB lighting allows multiple LED colors in one zone instead of
one static color at a time.
It is powered by a built in controller (compatible to both, BitFenix Alchemy 2.0,
static, and BitFenix 3.0, addressable, RGB products ) offering single colors to
match different system builds, but also featuring different rainbow modes.
Enhanced
Addressable RGB Illumination
The RGB illumination of the ENSO MESH
supports the latest ASUS AURA Sync 3 pin
addressable RGB motherboards, currently
found in high-end segment. It enables
users to coordinate multiple color lighting
on different devices, including the all new
Alchemy 3.0 addressable RGB strip, all
controlled and synchronized by the ASUS
AURA software bundled with Asus AURA
SYNC 3 pin motherboards.
AURA SYNC 3 Pin
Addressable
RGB Technology
4 pin RGB header
Addressable RGB header
4 pin RGB header
Front Panel
Addressable RGB
3pin socket
SATA
Power
Cable
Addressable
RGB 3pin socket
Static RGB
4pin socket
Front
RGB
Switch
The ENSO MESH comes with a high-quality tempered glass side panel
with a strength of 4mm. The tempered glass panel is see-through-tinted,
allowing a peak into the case showing off the now often RGB illuminated
main components.
See-through-tinted
4mm Tempered Glass Side Panel
The ENSO MESH comes with a PSU shroud hiding the PSU and up to
two HDDs beneath it, while three SSDs can be attached to the back of the
motherboard tray, showing only the motherboard, graphics cards and the
cooling solution through the tempered glass panel. The 23mm cable
management space behind motherboard tray makes it an easy job to
manage the cables clean. With the drive-trays out of the way, the ENSO
MESH provides plenty of space for graphics cards with a length up to
340mm.
Clean Interior With
23mm Cable Management
Space Behind
Motherboard Tray
To cool down the components, high density mesh on the front panel has
offered smooth intake. ENSO MESH supports up to two 140mm fans or a
280mm radiator in the front while a 120mm rear-fan or radiator at the rear
and up to two 120mm fans in the top will push the hot air out. ENSO also
supports up to 160mm high CPU air cooler.
Thermal Capability
ENSO MESH doesn’t compromise the sleek design of Mesh front panel. The high density mesh
has provided over ten thousand holes with magnetic removable function. The clean interior
design creates no interference to the air flow blowing straight on GPU that helps not only to cool
down the GPU also provide much focus air flow to the GPU. The close and clean PSU shroud
keeps ENSO MESH to have two individual chambers. It makes all components will have
individual cooling section. And the soft foams complemented with tempered glass lock the noise
inside. Bundled with the mesh dust filter offers the extreme cooling performance.
Cooling Engineering
120mm ( radiator )
Solid Top Cover
Mesh Top Cover
240mm or 280mm ( radiator )
To keep the interior of the ENSO MESH dust-free,
multiple filters are placed around the case. The
front and top filters are attached via magnets and
can be easily slid off to clean it.
The ENSO MESH also features BitFenix
Sideway™-removable PSU filters in the bottom,
thus enabling users to remove the PSU filter easily
without lifting or moving the case.
Easy Clean With
Removable Dust Filters
Step1.
Please target
the 2 tenons
on the front
panel
Step2.
Please insert the
filter into tenons and
let the magnets
attach to front panel
Color Black, White
Material Steel, Plastic, Tempered Glass
Motherboard Support Mini-ITX, MicroATX, ATX, E-ATX up to 272mm(10.7 inch)
Maximum Graphic card Length 340mm (13.3inch)
Maximum Graphic card width 150mm(5.9 inch)
Maximum CPU Cooler Height 160mm(6.2 inch)
Cable Management Space 23mm(0.9 inch)
Expansion Slots (PCI-E) 7
Front I/O Ports 2 x USB 3.0, 1 x HD Audio/Mic
Drive Bays
3.5" 2 (Usable as 2.5" bay)
2.5" 3
Fan Support
Front 2 x 140mm(5.5inch) or 3 x 120mm(4.7inch)
Top 2 x 120mm(4.7 inch)
Rear 1x 120mm(4.7 inch)
Included Fans
Front 1 x 120mm(4.7inch) Fan (Black)
Rear 1 x 120mm(4.7inch) Fan (Static RGB)
Radiator Support
Front
240mm(9.4inch) x 1 / 280mm(11inch) x 1 / 360mm(14.2inch) x 1
( Thickness up to 35mm(1.4inch) / width up to 141mm(5.6inch)
/ Length up to 400mm(15.7inch) )
Rear 1 x 120mm(4.7 inch)
Power Supply ATX & EPS 12V, Up to 160mm(6.3inch)
Dimensions (W x H x D) 210mm(8.3inch) x 489mm(19.3inch) x 452mm(17.8inch)
Weight 7kg/ 8.5Kg (15.5lb/ 18.8lb)
Part number EAN UPC
Enso Mesh BLK BFC-ESM-150-KKWGK-RP 4712883216701 886027015780
Enso Mesh WHI BFC-ESM-150-WWWGK-RP 4712883216718 886027015797
Loading...