
BitFenix Alchemy 3.0 Addressable RGB
LED-stripe Pack – 40cm X 2 takes PC
DIY illumination to the next level with
addressable RGBs, increasing lighting
possibilities with multiple colors on one
strip. Being an upgrade from the Alchemy
2.0 Magnetic RGB LED Strips, the latest
version comes with the high build quality
and durability our users are accustomed
to, modders and gamers alike.

The Alchemy 3.0 Addressable RGB LED-stripe Pack – 40cm X
2 has its name from the featured LEDs, which are individually
addressable, thus allowing pre-programmed multi-color rainbow
modes when attached to the optional controller or even
programming of each individual LED when attached to one of
the latest ASUS AURA SYNC motherboards with +5V 3-pin
addressable RGB support.
AURA SYNC 3 Pin
Addressable RGB
Technology
Addressable RGB header

The Alchemy 3.0 Addressable RGB LED-stripe Pack – 40cm X 2 feature the TriBright™
LED Technology known from previous BitFenix RGB products, thus providing higher color
saturation, increased brightness and a longevity. Further, the light is more evenly
scattered, casting softer shadows, increasing the overall illumination effect. The surface of
each strip is coated in a clear rubber for short-circuit protection and easy maintenance.
TriBright™ LED Technology

The Alchemy 3.0 Addressable RGB LED-stripe Pack – 40cm
X 2 are delivered with 50cm long cables and modular
components, assuring clean cable management and easy
cable routing. Further, the LED Strip and the optional
controller are equipped with high-quality magnets, allowing
easy installation and relocation around all metal panels in the
chassis. The 3M adhesive strip can be used for firm mounting
on most flat surfaces.
Modular Design &
Convenient Installation

To avoid system instability and possible data loss do not attach these magnetic LED
strips directly to DRAM, SSDs or HDDs.
The pin assignment is different between normal single color LED strips, RGB LED strips,
RGB+W LED strips and Addressable RGB LED strips. Alchemy 3.0 Addressable RGB
LED Strips & Alchemy 2.0 Magnetic LED Strips are not compatible with RGB controller
and RGB+W controller. The controller of Alchemy 2.0 Magnetic RGB LED strips is not
compatible with Alchemy 3.0 Addressable RGB LED strips. Wrong connection will cause
damage to the product. Please make sure the products in your LED strip chain are
compatible. BitFenix believes you will enjoy the user experience once you’ve chosen
BitFenix modding products.
Remark

Magnets
Black Sintered NdFeB Permanent Magnets
LED Type
SK6812 TriBright™ SMD
Lumen
60
Color Rendering Index
~80
Angle
120
°
Voltage (v)
5V
Flex PCB Quality
1oz copper
Protective cover
High-Clarity Polyurethane
Power Cable Length
50cm - 20"
LED Strip Width
10mm - 0.4"
LED Strip Thickness
3mm - 0.12"
Part number EAN UPC
Alchemy 3.0 Addressable RGB LED-stripe Pack – 40cm X 2
886027158081
Alchemy 3.0 Addressable RGB LED Strip - 40cm
LEDs
20
Magnets
4
Wattage (W)
6