When using an electrical appliance, basic
precautions should be observed, including
the following:
READ ALL INSTRUCTIONS
BEFORE USING YOUR
UPRIGHT DEEP CLEANER.
Always connect to a properly Earthed
outlet. Unplug from outlet when not in
use and before conducting
maintenance or troubleshooting.
WARNING:To reduce the
risk of fire, electric shock, or injury:
■
Use indoors only
■
Do not immerse
■
Use only on surfaces moistened by
cleaning process
■
Do not leave machine when it is plugged in
■
Do not service machine when it is plugged in
■
If the supply cord is damaged, it must be replaced
by the manufacturer or its service agent in order
to avoid a hazard
■
Do not use machine if it has been dropped,
damaged, left outdoors or dropped into water
■
Do not expose to rain, store indoors
■
Do not pull or carry by cord, use cord as a
handle, close door on cord, pull cord around sharp
corners or edges, run appliance over cord, or
expose cord to heated surfaces
■
Do not carry the appliance while in use
■
Do not unplug by pulling on cord; unplug by
grasping plug not the cord
■
Do not handle plug or appliance with wet hands
■
Do not put any object into appliance openings, use
with blocked opening or restrict air flow
■
Do not expose hair, loose clothing, fingers or body
parts to openings or moving parts
■
Do not pick up hot or burning objects
■
Do not pick up flammable or combustible
materials (lighter fluid, petrol, kerosene, etc.) or use
in the presence of explosive liquids or vapours
■
Do not use appliance in an enclosed space filled with
vapours given off by oil base paint, paint
thinner, some moth proofing substances,
flammable dust, or other explosive or toxic vapours
■
Remove plug from electrical outlet before cleaning
or maintaining the appliance
■
Not intended for use by young children or infirm
persons without supervision
■
Young children should be supervised to ensure
that they do not play with the appliance
■
Do not pick up toxic material (chlorine bleach,
ammonia, drain cleaner, petrol, etc.)
■
Do not modify the Earthed plug
■
Do not allow to be used as a toy
■
Do not use for any purpose other than described
in this User’s Guide
■
Use only manufacturer’s recommended
attachments
■
Use only cleaning products formulated by
BISSELL for use in this appliance to prevent
internal component damage
■
Keep openings free of dust, lint, hair, etc.
■
Keep appliance on a level surface
■
Turn off all controls before unplugging
■
Be extra careful when cleaning stairs
■
Pay close attention when working
around children
SAVE THESE
INSTRUCTIONS.
THIS MODEL IS FOR HOUSEHOLD USE ONLY.
WARNING:
be Earthed
.
IMPORTANT FOR OPERATION ON
A 220-240 VOLT A.C. 50/60 Hz POWER
SUPPLY ONLY.
If your appliance is fitted with a nonrewireable
BS 1363 plug it must not be used unless a 13
amp (ASTA approved to BS 1362) fuse is fitted in
the carrier contained in the plug. Spares may be
obtained from your BISSELL supplier. If for any
reason the plug is cut off, it must be disposed
of, as it is an electric shock hazard should it be
inserted into a 13 amp socket.
1.42 L
Pet Odor and Soil
Removal
with Scotchgard
protector
™
Formula
1.42 L
Natural Orange
Extract Formula
™
with Scotchgard
protector
1.42 L
Lavender Essence
Formula with
™
Scotchgard
protector
™
32 oz.
Hard Floor
Solutions
Formula
™
8 oz.
Scotchgard
Protector
Post
Treatment
Cartridge
22 oz.
Tough Stain
PreCleaner
5
™
How to use this guide
This user’s guide has been designed to help you
get the utmost satisfaction from your BISSELL
ProHeat 2X. You’ll find assembly and operating
instructions, safety precautions, as well as
maintenance and troubleshooting instructions.
Please read this user's guide thoroughly before
assembling your deep cleaner.
Pay particular attention to the product diagram,
assembly instructions, and part names. Locate
and organize all parts before assembly. Familiarize
yourself with the parts and where they go.
Following this user’s guide will greatly enhance
your ability to get the most performance from your
BISSELL ProHeat 2X for many years.
Assembly
ProHeat 2X comes in three, easy to
Your
assemble components:
Upper Handle
Lower Handle
Tool Caddy
The only thing you will need to assemble your
cleaner is a Phillips head screwdriver.
Slide upper handle onto lower handle.
1.
. Screw 3 screws into the marked holes.
2
Place upper hose rack onto back of upper
3.
handle and secure with tapered screw.
Place lower hose rack onto back of upper
4.
handle by pushing in and sliding down until
it snaps into place.
Snap tools into the tool caddy as shown in
5.
figure 5.
Wrap power cord and flex hose as shown in
6.
figure 5.
WARNING:
Do not plug in your
cleaner until you have
completely assembled it per
the following instructions
and are familiar with all
instructions and operating
procedures.
Your BISSELL ProHeat 2X deep cleaner is a home
cleaning system that uses the power of heat,
brushes and cleaning formula to get the deep
down dirt for a maximum clean. Not only does it
come with a lot of unique features, it has been
designed with you, the customer, in mind.
Built-in-Heater feature
BISSELL ProHeat 2X models all feature a patented
built-in heater which will heat the hand hot tap
water you put in up to 25 degrees hotter to safely
optimize cleaning effectiveness. The heater
will never allow the temperature to exceed 190
degrees. The heater switch on the front of the
machine controls the heater so you have the
option to turn off the heat if you are cleaning
delicate wool or oriental rugs.
Dual DirtLifter™ PowerBrushes
The two DirtLifter PowerBrush rolls are
designed to enhance cleaning performance.
The bristle pattern safely lifts out the deep
down dirt while gently grooming carpet fibers.
The floating suspension self-adjusts to all
carpet heights and protects your carpet if
you leave the power switch ON ( I ). Once the
product is in the upright position, the brushes
automatically stop spinning. The detent pedal
will activate the brushes when floor cleaning.
Custom Clean™
The Custom Clean feature automatically mixes
hand hot tap water with the BISSELL formula.
Simply choose one of the 4 settings (heavy
traffic, normal clean, light clean, or water rinse)
and the ProHeat 2X will adjust the right amount
of cleaning formula to mix with the heated water
to fit your cleaning need.
Having a separate formula tank from the water
tank also allows no waste of formula. Because the
water and formula are stored separately, they are
not mixed until you are ready to clean. When your
cleaning job is finished, the formula can be stored
ready to use in your machine for the next time!
Dry Aire™
The Dry Aire system spreads hot air across the
carpet to aid in drying. The feature runs while
your machine is powered. Heated air is distributed
from the bottom and back of the machine and
blown across the carpet while you clean!
Our 2-in-1 water tank full capacity system is
designed with a heavy duty bladder inside for clean
water. As you clean, the clean water in the bladder
will empty and mix with the cleaning formula. Dirty
water pulled out of your carpets will collect around
the outside of the bladder so that clean and dirty
water are always kept separate. This allows the
user to maximize tank space, yet only carry one
tank to and from the sink for emptying and filling.
Easy to remove and clean nozzle
Now, cleaning up your machine after the
cleaning process is easier than ever! Simply
remove the 2-in-1 water tank and remove the
screw to pop out the nozzle for rinsing in the
sink. Dirt, loose carpet fibers and remaining pet
hair or fuzz get washed away in a snap.
ReadyTools™ dial
This provides either floor cleaning or above floor
cleaning with the turn of a knob. If choosing
above floor cleaning for upholstery, stairs, or for
those creases close to the baseboards, turn knob
to "TOOLS" and choose the attachment
appropriate for the job. Attach tool to the flex hose
and you are ready to go. Be sure to turn knob
back to "FLOOR CLEANING" when done.
Scotchgard™ Protector
Carpet protection applied at the mill typically
wears down over time from heavy foot traffic
and everyday cleaning, including deep cleaning.
To help restore this important protection, only
BISSELL offers deep cleaning formulas with
Scotchgard protector and a post-applicator to
apply Scotchgard protector with the same
materials used by carpet mills. This offers extra
protection against dirt and tough stains to keep
your carpets looking good longer.
To maintain your Scotchgard 5-year limited stain
warranty, you no longer are required to hire a
professional. By using your BISSELL ProHeat
machine with BISSELL formulas containing
Scotchgard protector every 12 months, your carpet
warranty from 3M remains in effect. No other home
deep cleaning system can do this for you. Refer to
the Scotchgard protector warranty for details.
1. Plan activities to give your carpet time to dry.
2. Move furniture to another area if cleaning
an entire room (optional).
3.Vacuum area with a dry vacuum cleaner
thoroughly before deep cleaning.
4. Plan your cleaning route to leave an exit path. It
is best to begin cleaning in the corner farthest
from your exit.
5.Pretreating
Pretreating with BISSELL Tough Stain Precleaner
improves cleaning effectiveness and is
recommended for heavily soiled carpet in high
traffic areas such as entryways and hallways.
A. Spray the BISSELL Tough Stain
Precleaner formula onto heavy traffic
areas, soiled areas, or stains.
B. Allow to penetrate for at least 3 minutes.
C. Clean as normal, using the BISSELL
ProHeat 2X machine on the high traffic
setting, following the instructions on
pages 10-12.
ATTENTION:
Some Berber carpets have a
tendency to fuzz with wear.
Repeated strokes in the same
area with an ordinary vacuum
or deep cleaner may aggravate
this condition. Please see Stain
Removal instructions on page 15.