Bissell 67F8, 44M3 User Manual

USER'S GUIDE

44M3, 67F8 SERIES

Thank You

Safety instructions

Product view

Earn BISSELL Rewards!

product today!

See details on

back page

6-9

10-15

16-17

Assembly

Operations

Maintenance and care

Troubleshooting

Replacement parts

Accessories

Warranty

Product registration

Consumer services

Thanks for buying a BISSELL Vacuum

We’re glad you purchased a BISSELL vacuum. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system.

Your BISSELL vacuum is well made, and we back it with a limited three year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Services department, so, should you ever have a problem, you’ll receive fast, considerate assistance.

My great-grandfather invented the floor sweeper in 1876. Today, BISSELL is a global leader in the design, manufacture, and service of high quality homecare products like your BISSELL upright vacuum.

Thanks again, from all of us at BISSELL.

Mark J. Bissell Chairman, President & CEO

www.bissell.com 800.237.7691

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical precautions should be observed, including the following:

READ ALL INSTRUCTIONS BEFORE USING YOUR UPRIGHT VACUUM.

Always connect to a polarized outlet (left slot is wider than right). Unplug from outlet when not in use and before conducting maintenance.

WARNING: To

reduce the risk of fire, electric shock, or injury:

■

Do not modify the polarized plug to fit a

non-polarized outlet or extension cord.

■

Do not leave vacuum cleaner unattended

when it is plugged in.

■

Unplug from outlet when not in use and

before servicing.

■

Unplug before attaching the TurboBrush.

■

Do not use outdoors or on wet surfaces.

■

Do not allow children to operate vacuum

cleaner or use as a toy.

■

Close attention is necessary when used

by or near children.

■

Do not use for any purpose other than

described in this user’s guide.

■

Use only manufacturer’s recommended

attachments.

■

Do not use with damaged cord or plug.

■

If appliance is not working as it should,

has been dropped, damaged, left outdoors, or dropped into water, have it repaired at an authorized service center.

■

Do not pull or carry by cord, use cord as

a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.

■

Do not unplug by pulling on cord. To

unplug, grasp the plug, not the cord.

■

Do not handle vacuum cleaner or plug

with wet hands.

■

Do not put any object into openings. Do

not use with any opening blocked; keep openings free of dust, lint, hair, and anything that may reduce air flow.

www.bissell.com 800.237.7691

appliance, basic

■

Keep hair, loose clothing, fingers, and all

parts of body away from openings and moving parts.

■

Turn off all controls before plugging or

unplugging vacuum cleaner.

■

Use extra care when cleaning stairs.

■

Do not pick up flammable materials

(lighter fluid, gasoline, kerosene, etc.) or use in the presence of explosive liquids or vapors.

■

Do not pick up toxic material (chlorine

bleach, ammonia, drain cleaner, etc.).

■

Do not use vacuum cleaner in an

enclosed space filled with vapors given off by oil base paint, paint thinner, some moth proofing substances, flammable dust, or other explosive or toxic vapors.

■

Do not pick up hard or sharp objects

such as glass, nails, screws, coins, etc.

■

Do not pick up anything that is burning or

smoking, such as cigarettes, matches, or hot ashes.

■

Do not use without filters in place.

■

Use only on dry, indoor surfaces.

■

Keep appliance on a level surface.

■

Do not carry the vacuum cleaner while it

is running.

■

Hold plug when rewinding onto cord

reel. Do not allow plug to whip when rewinding.

SAVE THESE INSTRUCTIONS FOR FUTURE USE

THIS APPLIANCE HAS A POLARIZED PLUG.

To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a proper outlet. Do not change the plug in any way.

This model is for household use only.

Product view

Stretch Hose

Pet TurboBrush® Tool Pet TurboEraser (67F8 series)

Clean Filter Indicator

Crevice Tool Extension

Wand

Dirt Container

Filter Cup Lock'n

Seal™ Lever Headlight

Pet Hair Lifter

™

Tool

Powerfoot

Combination Dusting Brush/ Upholstery Tool

HEPA Media Filter

Cord Rewind

Automatic Cord Rewind

Handle Release Pedal

Furniture Protection Guard

Hose Clip

Quick Reach® Handle

Carrying Handle

Hose Wand

Hose Wand Base

Foot Hose

CAUTION:

Do not plug in your vacuum cleaner until you are familiar with all instructions and operating procedures.

WARNING:

Plastic film can be dangerous. To avoid danger of suffocation, keep away from babies and children.

www.bissell.com 800.237.7691

Assembly

You need: Phillips head screwdriver.

Attach handle to vacuum

1. Locate the vacuum handle and remove

the screw packet (1 screw) taped to the base of the handle.

2. Stand the vacuum upright and slide

the base of the handle firmly into the grooves at the top of the vacuum body.

3. IMPORTANT – Continue to push firmly

until the handle is flush with the front of the vacuum body.

4. Insert the screw provided and tighten

securely.

Attach vacuum hose and tools

1. Attach the Twist ‘n Snap™ hose by lining

up the tabs on the base with the corresponding notches on the back of the vacuum. Turn the Twist ‘n Snap hose to the right to lock the hose into place.

2. Grasping the Quick Reach

slide the end of the hose wand onto the hose wand base. Snap the hose into the hose clip.

NOTE: The Powerfoot will not suction properly unless the hose wand is firmly attached.

3. Slide the extension wand and the crevice

tool together into the storage holder.

handle,

4. Snap the combination tool into the stor-

age clip.

5. Attach the Pet TurboBrush by aligning the

small holes near the brush roll with the tabs at the bottom of TurboBrush housing. Snap TurboBrush into place.

NOTE: 67F8 series includes Pet TurboEraser™ Tool.

6. Flip the Pet Hair Lifter down until it clicks

into place on the front of the foot.

NOTE: Flip the Pet Hair Lifter down for carpeted surfaces and up for non-carpeted surfaces.

www.bissell.com 800.237.7691

Operations

Automatic power cord rewind

1. Gently pull out power cord and stop when

yellow line is visible. Do not pull power cord beyond the red line. Plug cord into electrical outlet.

2. To return cord, with vacuum power button

OFF, remove plug from outlet. Hold plug and press automatic cord button to wind cord into reel. Do not allow plug to whip when rewinding.

Power switch

The power switch is located just below the hand on the side of the vacuum.

I - ON O - OFF

Handle position

Press the handle release pedal with your foot to place vacuum into one of three cleaning positions.

Upright: For storage, transporting, and above

floor cleaning with tools.

•Transportinginuprightpositionbytilting

vacuum on rear wheels and push forward or use carrying handle on back of handle base.

2. Normal cleaning: Press handle release

pedal once for most household floor cleaning.

3. Low cleaning: From normal cleaning posi-

tion, press handle release pedal once for cleaning under low furniture.

CAUTION:

Be careful to avoid injury as cord retracts very quickly.

CAUTION:

Before using your vacuum, make sure that the dirt container is in locked position and that all filters (inner circular, outer circular, pre-motor and postmotor) are in place. Do not operate your vacuum without these filters.

www.bissell.com 800.237.7691

+ 14 hidden pages