Bissell 6591 User Manual
®
CleanView
BAGLESS REVOLUTION™
/ Power Trak
®
USER’S GUIDE
6591/3595/3596 SERIES
3
Safety Instructions
4
Product View
5-6
Assembly Instructions
7-9
Operation / Special Tools
10-13
13
14
Troubleshooting
15
Replacement Parts
16
Warranty
ug603-2564_3595_1005.indd 1ug603-2564_3595_1005.indd 1 1/4/06 9:50:54 AM1/4/06 9:50:54 AM
Maintenance
Consumer Services
Thanks For Buying A BISSELL Vacuum
We’re glad you purchased a BISSELL Vacuum. Everything we know about floor
care went into the design and construction of this complete, high-tech home
vacuuming system.
Your BISSELL Vacuum is well made, and we back it with a limited
comprehensive one-year warranty. We also stand behind it with a
knowledgeable, dedicated Consumer Services Department, so, should you ever
have a problem, you’ll receive fast, considerate assistance.
My great-grandfather invented the floor sweeper in 1876. Today, BISSELL is a
global leader in the design, manufacture, and service of high quality homecare
products like your BISSELL Vacuum.
Thanks again, from all of us at BISSELL.
Mark J. Bissell
President and Chief Executive Officer
2
ug603-2564_3595_1005.indd 2ug603-2564_3595_1005.indd 2 1/4/06 9:50:59 AM1/4/06 9:50:59 AM
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical
precautions should be observed, including
the following:
READ ALL INSTRUCTIONS
BEFORE USING YOUR
UPRIGHT VACUUM.
Always connect to a polarized outlet (left slot is
wider than right). Unplug from outlet when not in
use and before conducting maintenance.
WARNING: To reduce
the risk of fire, electric shock,
or injury:
■
Do not modify the polarized plug to fit a
non-polarized outlet or extension cord.
■
Do not leave vacuum cleaner unattended
when it is plugged in.
■
Unplug from outlet when not in use and
before servicing.
■
Unplug before attaching TurboBrush.
■
Do not use outdoors or on wet surfaces.
■
Do not allow children to operate vacuum
cleaner or use as a toy.
■
Close attention is necessary when used by or
near children.
■
Do not use for any purpose other than described
in this User’s Guide.
■
Use only manufacturer’s recommended
attachments.
■
Do not use with damaged cord or plug.
■
If appliance is not working as it should,
has been dropped, damaged, left outdoors,
or dropped into water, have it repaired at an
authorized service center.
■
Do not pull or carry by cord, use cord as a
handle, close a door on cord, or pull cord
around sharp edges or corners. Do not run
appliance over cord. Keep cord away from
heated surfaces.
■
Do not unplug by pulling on cord. To unplug,
grasp the plug, not the cord.
■
Do not handle vacuum cleaner or plug with
wet hands.
■
Do not put any object into openings.
Do not use with any opening blocked; keep
openings free of dust, lint, hair, and anything
that may reduce air flow.
appliance, basic
■
Keep hair, loose clothing, fingers, and all parts
of body away from openings and moving parts.
■
Turn off all controls before plugging or
unplugging vacuum cleaner.
■
Use extra care when cleaning stairs.
■
Do not pick up flammable materials (lighter
fluid, gasoline, kerosene, etc.) or use in the
presence of explosive liquids or vapors.
■
Do not pick up toxic material (chlorine bleach,
ammonia, drain cleaner, etc.).
■
Do not use vacuum cleaner in an enclosed
space filled with vapors given off by oil base
paint, paint thinner, some moth proofing
substances, flammable dust, or other
explosive or toxic vapors.
■
Do not pick up hard or sharp objects such as
glass, nails, screws, coins, etc.
■
Do not pick up anything that is burning
or smoking, such as cigarettes, matches, or
hot ashes.
■
Do not use without filters in place.
■
Use only on dry, indoor surfaces.
■
Keep appliance on a level surface.
■
Do not carry the vacuum cleaner while it
is running.
SAVE THESE
INSTRUCTIONS FOR
FUTURE USE
THIS APPLIANCE HAS
A POLARIZED PLUG.
To reduce the risk of electric shock, this appliance has
a polarized plug (one blade is wider than the other).
This plug will fit in a polarized outlet only one way. If
the plug does not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a qualified electrician
to install a proper outlet. Do not change the plug in
any way.
This model is for household use only.
3
ug603-2564_3595_1005.indd 3ug603-2564_3595_1005.indd 3 1/4/06 9:50:59 AM1/4/06 9:50:59 AM
Cord Clip
Carrying
Handle
Hose Clip
Stretch Hose
Quick Release™
Cord Wrap
Handle
TurboBrush
(Select Models Only)
®
Crevice Tool
Twist 'n
Snap™ Hose
Upper Tank Knob
Extension Wand
Dusting Brush/
Upholstery Tool
Handle Release
Pedal
Wide Cleaning
Path Foot
4
Height
Adjustment
Knob
Furniture
Protection
Guard
Power Cord
Quick Reach®
Handle
Hose Wand
Hose
Wand Base
Dirt Container
Dust Chambers
with Screens
Pre-Motor Filter
Headlight
Window
CAUTION:
Do not plug in your vacuum
cleaner until you are familiar
with all instructions and
operating procedures.
Clean Carpet Sensor
(Select Models Only)
Power Switch
Clean Filter Indicator
(Select Models Only)
Louvers
Upper Tank
Frame and Filter
(Inside Louvers)
Upper Tank
Post-Motor
Filter
Lock ’n Seal®
Lever
Wide Window
Foot
Furniture Protection
Guard
ug603-2564_3595_1005.indd 4ug603-2564_3595_1005.indd 4 1/4/06 9:50:59 AM1/4/06 9:50:59 AM
How To Use This Guide
This User’s Guide has been designed to help you
get the most satisfaction from your BISSELL vacuum.
You’ll find assembly and operating instructions,
safety precautions, as well as maintenance and
troubleshooting instructions. Please read this Guide
thoroughly before assembling your vacuum cleaner.
Pay particular attention to the product diagram,
assembly instructions, and part names. Locate and
organize all parts before assembly. Familiarize
yourself with the parts and where they fit. Following
this User’s Guide will greatly enhance your ability
to get the most performance from your BISSELL
vacuum for many years.
How To Put It Together
The only tool you’ll need to assemble your vacuum
cleaner is a screwdriver.
Attach Handle To Vacuum
Locate the vacuum Handle and remove the screw
1.
packet taped to the base of the Handle.
Stand the vacuum upright and slide the base of
2.
the Handle firmly into the grooves at the top of the
vacuum body.
Check to be sure the Handle is fitted to the vacuum
3.
body. If there is a gap in front, continue to push firmly
until the Handle is flush.
Insert the screw provided from the screw packet into
4.
the existing hole. Tighten securely with a screwdriver.
WARNING:
Plastic film can
be dangerous. To avoid
danger of suffocation,
keep away from babies
and children.
5
ug603-2564_3595_1005.indd 5ug603-2564_3595_1005.indd 5 1/4/06 9:51:00 AM1/4/06 9:51:00 AM
Loading...