Bissell 6584 User Manual

PowerForce

BAGLESS

USER’S GUIDE

6584 SERIES

Safety Instructions

Product View

Assembly

6-7

8-11

12-13

Operations

Maintenance and Care

Troubleshooting

Consumer Services

Replacement Parts

Warranty

Thank you for buying a BISSELL PowerForce

We’re glad you purchased a BISSELL PowerForce Bagless Vacuum. Everything we know about floor care went into the design and construction of this powerful, high-tech home vacuuming system.

Your BISSELL PowerForce Bagless is well made, and we back it with a limited one year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Services Department, so, should you ever have a problem, you’ll receive fast, considerate assistance.

My great-grandfather invented the floor sweeper in 1876. Today, BISSELL is a global leader in the design, manufacture, and service of high quality homecare products like your BISSELL PowerForce Bagless.

Thanks again, from all of us at BISSELL.

Mark J. Bissell

President and Chief Executive Officer

Bagless Vacuum

www.bissell.com 800.237.7691

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical precautions should be observed, including the following:

READ ALL INSTRUCTIONS BEFORE USING YOUR UPRIGHT VACUUM.

Always connect to a polarized outlet (left slot is wider than right). Unplug from outlet when not in use and before conducting maintenance.

WARNING: To reduce the

risk of fire, electric shock, or injury:

■

Do not modify the polarized plug to fit a non-polarized outlet or extension cord.

■

Do not leave vacuum cleaner unattended when it is plugged in.

■

Unplug from outlet when not in use and before servicing.

■

Do not use outdoors or on wet surfaces.

■

Do not allow children to operate vacuum cleaner or use as a toy.

■

Close attention is necessary when used by or near children.

■

Do not use for any purpose other than described in this User’s Guide.

■

Use only manufacturer’s recommended attachments.

■

Do not use with damaged cord or plug.

■

If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, have it repaired at an authorized service center.

■

Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.

■

Do not unplug by pulling on cord. To unplug, grasp

the plug, not the cord.

■

Do not handle vacuum cleaner or plug with

wet hands.

■

Do not put any object into openings. Do not use with any opening blocked; keep openings free of dust, lint, hair, and anything that may reduce air flow.

appliance, basic

■

Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.

■

Turn off all controls before plugging or unplugging vacuum cleaner.

■

Use extra care when cleaning stairs.

■

Do not pick up flammable materials (lighter fluid, gasoline, kerosene, etc.) or use in the presence of explosive liquids or vapors.

■

Do not pick up toxic material (chlorine bleach, ammonia, drain cleaner, etc.).

■

Do not use vacuum cleaner in an enclosed space filled with vapors given off by oil base paint, paint thinner, some moth proofing substances, flammable dust, or other explosive or toxic vapors.

■

Do not pick up hard or sharp objects such as glass, nails, screws, coins, etc.

■

Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.

■

Do not use without filters in place.

■

Use only on dry, indoor surfaces.

■

Keep appliance on a level surface.

■

Do not carry the vacuum cleaner while it is running.

SAVE THESE INSTRUCTIONS FOR FUTURE USE.

THIS APPLIANCE HAS A POLARIZED PLUG.

To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a proper outlet. Do not change the plug in any way.

This model is for household use only.

www.bissell.com 800.237.7691

Product view

Handle

Stretch Hose

Crevice Tool

Louvers

Upper Tank

Cord Clip

Hose Clip

Quick Release Cord Wrap

Power Cord

Carrying Handle

Extension Wand Dirt Container

Filter Cup

Inner and Outer Circular Filters

Lock ’n Seal Lever

Post-Motor Filter

Height Adjustment Knob

Furniture Protection Guard

™

Quick Reach® Handle

Combination Dusting Brush/ Upholstery Tool

Hose Wand

Power Switch

Handle Release Pedal

Foot Hose

Hose Wand Base

Powerfoot

CAUTION:

Do not plug in your vacuum cleaner until you are familiar with all instructions and operating procedures.

www.bissell.com 800.237.7691

How to use this guide

This User’s Guide has been designed to help you get the most satisfaction from your BISSELL PowerForce Bagless. You’ll find assembly and operating instructions, safety precautions, as well as maintenance and troubleshooting instructions. Please read this Guide thoroughly before assembling your vacuum cleaner.

Pay particular attention to the product diagram, assembly instructions, and part names. Locate and organize all parts before assembly. Following this User’s Guide will greatly enhance your ability to get the most performance from your BISSELL PowerForce Bagless for many years.

Assembly

The only tool you’ll need to assemble your vacuum cleaner is a screwdriver.

Attach handle to vacuum

1. Locate the vacuum handle and remove the screw packet taped to the base of the handle.

2. Stand the vacuum upright and place the handle on the top of the vacuum body as shown.

3. Insert the screws provided from the screw packet into the existing holes on each side. Tighten securely with a screwdriver.

WARNING:

Plastic film can be dangerous. To avoid danger of suffocation, keep away from babies and children.

Attach vacuum hose and tools

1. Attach the Twist ‘n Snap™ hose by lining up the tabs on the base with the corresponding notches on the back of the vacuum as shown.

2. Turn the Twist ‘n Snap hose to the right to lock the hose into place.

3. Grasping the quick reach handle, slide the end of the hose wand onto the hose wand base. Snap the hose into the hose clip.

NOTE: The powerfoot will not operate effectively unless the hose wand is firmly attached.

4. Slide the extension wand and the crevice tool

together into the storage clip on the side of the vacuum.

5. Snap the combination tool into the storage clip on the back of the vacuum.

www.bissell.com 800.237.7691

+ 11 hidden pages