Bissell 6489 User Manual [en, es]

USER'S GUIDE

6489 SERIES

Thank You

Safety Instructions

Product View

Earn BISSELL Rewards!

product today!

See details on

back page

Assembly

6-7

Operations

8-12

Maintenance and Care

Troubleshooting

Replacement Parts

Accessories

Warranty

Product Registration

Consumer Care

Thanks for buying a BISSELL Vacuum

We’re glad you purchased a BISSELL vacuum. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system.

Your BISSELL Zing canister vacuum is well made, and we back it with a limited one year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Care department, so, should you ever have a problem, you’ll receive fast, considerate assistance.

My great-grandfather invented the floor sweeper in 1876. Today, BISSELL is a global leader in the design, manufacture, and service of high quality homecare products like your BISSELL Zing canister vacuum.

Thanks again, from all of us at BISSELL.

Mark J. Bissell Chairman & CEO

www.bissell.com 800.237.7691

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical basic precautions should be observed, including the following:

READ ALL INSTRUCTIONS BEFORE USING YOUR CANISTER VACUUM.

Always connect to a polarized outlet (left slot is wider than right). Unplug from outlet when not in use and before conducting maintenance.

WARNING: To

reduce the risk of fire, electric shock, or injury:

■

Unplug from outlet when not in use

and before servicing.

■

Do not use with damaged cord or plug.

■

To unplug, grasp plug, not cord.

■

Do not pull or carry by cord, use cord as

a handle, close door on cord, pull cord around sharp corners, run cleaner over cord, or expose cord to heated surfaces.

■

Hold plug when rewinding the cord

onto the reel. Do not allow the plug to whip when rewinding.

■

Do not use cleaner if it has been

dropped, damaged, left outdoors or dropped into water. Have it repaired at an Authorized Service Center.

■

Do not allow children to use as a toy.

■

Do not use outdoors or on wet surfaces.

■

Do not handle cleaner or plug with

wet hands.

■

Do not put any object into openings, use

with blocked opening, or restrict air flow.

■

Do not use without dust bag and/or

filters in place.

■

Do not allow hair, loose clothing, fingers

or body parts to get near openings or floor brush in the appliance.

■

Do not pick up hot coals, cigarette

butts, matches or any hot, smoking, or burning objects.

■

Do not pick up hard or sharp objects

such as glass, nails, screws, coins, etc.

www.bissell.com 800.237.7691

appliance,

■

Do not pick up flammable or combus-

tible materials (lighter fluid, gasoline, kerosene, etc.) or use in the presence of explosive liquids or vapor.

■

Do not unplug by pulling on cord

■

Do not pick up toxic material (chlorine

bleach, ammonia, drain cleaner, etc.).

■

Do not use in an enclosed space filled

with vapors given off by oil base paint, paint thinner, some moth proofing substances, flammable dust, or other explosive or toxic vapors.

■

Do not use for any purpose other

than described in this User’s Guide.

■

Always turn off this appliance before con-

necting or disconnecting vacuum hose.

■

Use only manufacturer’s

recommended attachments.

■

Use only on dry, indoor surfaces.

■

Keep openings free of dust, lint, hair, etc.

■

Keep appliance on a level surface.

■

Turn off all controls before plugging

in or unplugging cleaner.

■

Be extra careful when cleaning stairs.

■

Close attention is necessary when

used by or near children.

SAVE THESE INSTRUCTIONS FOR FUTURE USE

THIS APPLIANCE HAS A POLARIZED PLUG.

To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a proper outlet. Do not change the plug in any way.

This model is for household use only.

Product view

Carry Handle

Hose Connector

Handle

Air Flow Regulator

Extension Wands

Dirt Cup Release Button

Dirt Cup Filter

Hose

Emptying Button

Brush Switch

Multi-Surface Floor Nozzle

WARNING:

Do not plug in your vacuum until you are familiar with

Combination Crevice Tool/Dusting Brush

www.bissell.com 800.237.7691

all instructions and operating procedures.

Easy Empty™ Dirt Cup

Assembly

1. Connect hose to vacuum by inserting

hose connector on the end of the hose into the suction inlet. Make sure the hose is positioned so the tabs on the hose connector line up with the notches on the suction inlet. Once inserted into the suction inlet, turn clockwise to lock into place.

2. Attach extension wands section together

by inserting into one another and twisting slightly to tighten.

3. Connect hose handle to the end of

the extention wand and twist slightly to tighten.

4. Connect floor nozzle to the end of

the extension wand and twist slightly to tighten.

5. Once assembled, you can store your

vacuum by inserting the storage clip (located on the back of the floor nozzle) into the storage slot on the rear of the vacuum.

WARNING:

Plastic film can be dangerous. To avoid danger of suffocation, keep away from babies and children.

Suction Inlet

www.bissell.com 800.237.7691

Operations

Power cord

The power cord is located at the rear of the vacuum. Gently pull out the power cord, watching for the yellow line. Stop pulling the power cord once the yellow line is visible. There is also a red line, which indicates the end of the usable cord. Do not pull the power cord out beyond the red line.

Automatic Cord Rewind Button

Automatic cord rewind

Your vacuum is equipped with an automatic cord rewind. When cleaning is finished, press the power button OFF and grasp the plug to disconnect from the electrical outlet. Hold the plug and press the automatic cord rewind button to rewind the cord automatically.

Power button

Turn the power ON or OFF by pressing lightly downward on the power button ( ).

CAUTION:

Be careful to avoid injury as cord retracts very quickly.

Power Button

CAUTION:

Before using your vacuum, make sure that the dirt cup and all filters are in place. Do not operate your vacuum without the dirt cup and filters.

NOTICE:

While vacuuming, certain types of carpets and low humidity conditions may generate small static discharges. The discharges are entirely harmless and are not associated in any way with the main power supply.

www.bissell.com 800.237.7691

Operations

Special tools

Your BISSELL Zing Canister is not only a powerful carpet and rug vacuum cleaner, it’s also a versatile bare floor and above floor vacuum cleaner when you select one of the special tools.

Floor nozzle

Use to vacuum carpets, rugs and bare floors. Swivel head turns to get into tight spaces and fits under cabinets.

1. To vacuum carpets and rugs, push the

brush switch to the carpet position . This will pull the brushes up into the floor nozzle.

2. To vacuum bare floors, push the brush

switch to the bare floor position . This will extend the brushes down from the floor nozzle.

Combination crevice tool/ dusting brush

Use the crevice tool in tight, narrow spaces. Use the dusting brush to clean curtains, draperies, cushions and fabrics.

Tip:

Before cleaning under low furniture, check area first for objects that might harm the unit or block the hose.

Brush Up

Brush Down

Air flow regulator

Open the air flow regulator by sliding the regulator down towards the extension wand to an open position. This will reduce the suction power for vacuuming delicate fabrics.

For full suction power, close the air flow regulator by sliding the regulator up to the closed position.

Tip:

Use the air flow regulator to reduce air flow as needed when using the tools.

Tip:

Hair, string and small objects can block the hose and tools. Check them occasionally for obstructions.

www.bissell.com 800.237.7691

Maintenance and care

Emptying the dirt cup

Empty the dirt cup as soon as the dirt reaches the “FULL” lines on the sides of the dirt cup.

1. Unplug the vacuum from the

electrical outlet.

2. Remove the hose by turning the hose

connector counter clockwise and pulling it out from the suction inlet. Set hose aside.

3. Press the dirt cup release button on

the carry handle and lift up to remove the dirt cup.

4. Choose an emptying method. Method

#2 is recommended for allergy suffers.

Method #1 – Hold the dirt cup over a

trash can and push the emptying button to open the bottom. Close the bottom after the dirt empties.

Method #2 – Place a plastic bag over

the bottom of the dirt cup. Push the emptying button through the plastic to open the bottom. After the dust settles, close the bottom and remove the bag to discard.

5. Replace the dirt cup by placing it back

into the vacuum and pushing down on the carry handle until it snaps back into place.

WARNING:

To reduce the risk of electric shock, turn power switch OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting checks.

Dirt Cup Release Button

Emptying Button

www.bissell.com 800.237.7691

Maintenance and care

Cleaning the dirt cup filters

Use only BISSELL replacement filters in your Zing Canister.

1. Unplug the vacuum from the

electrical outlet.

2. The dirt cup filters can be reached

by removing the dirt cup from the vacuum, grasping the handle on the bottom of the dirt cup filter assembly and turning counter clockwise to unlock. Pull straight down to remove.

3. Remove the dirt cup filter screen

by grasping the bottom of the filter frame base and pulling straight up.

4. Remove the dirt cup filter by

grasping the bottom of the filter frame base and turning the dirt cup filter counter clockwise and pulling straight up.

5. The dirt cup filter screen and dirt

cup filter can be hand washed in cold water with a mild detergent. Rinse well and air dry completely before placing back onto the filter frame base.

WARNING:

To reduce the risk of electric shock, turn power switch OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting checks.

www.bissell.com 800.237.7691

Maintenance and care

Cleaning the dirt cup filters (cont)

6. Attach the dirt cup filter back onto

the filter frame base by lining up the tabs on the filter base with the notches on the dirt cup filter and turning clockwise to lock back into place.

7. Attach the dirt cup filter screen back

on to the dirt cup filter by sliding it down over the dirt cup filter, making sure that the tabs on the bottom of the dirt cup filter screen line up with the notches on the dirt cup filter.

8. Insert the dirt cup filter assembly

back into the dirt cup by lining up the tabs on the top of the dirt cup filter assembly with the notches inside the top of the dirt cup and turning the handle on the bottom of the dirt cup filter assembly clockwise to lock into place.

www.bissell.com 800.237.7691

+ 22 hidden pages