![](/html/0b/0be1/0be172ad379b2881dd27710e629e1fdb20a9b4e2d16bf5acbd8cf4209541c6a7/bg2.png)
Thanks for buying a BISSELL CleanView
We’re glad you purchased a BISSELL vacuum. Everything we know about
floor care went into the design and construction of this complete,
high-tech home cleaning system.
Your carpet cleaner is well made, and we back it with a limited warranty.
We also stand behind it with a knowledgeable, dedicated Consumer
Care department, so, should you ever have a problem, you’ll receive
fast, considerate assistance.
My great-grandfather invented the floor sweeper in 1876. Today, BISSELL
is a global leader in the design, manufacture, and service of high quality
homecare products like your carpet cleaner.
Thanks again, from all of us at BISSELL.
Mark J. Bissell
Chairman & CEO
®
vacuum
2
www.bissell.com 800.237.7691
![](/html/0b/0be1/0be172ad379b2881dd27710e629e1fdb20a9b4e2d16bf5acbd8cf4209541c6a7/bg3.png)
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical
precautions should be observed, including
the following:
READ ALL INSTRUCTIONS BEFORE USING
UPRIGHT VACUUM
Always connect to a polarized outlet (left slot is
wider than right). Unplug from outlet when not in
use and before conducting maintenance.
appliance, basic
WARNING:
To reduce the risk of fire,
electric shock, or injury:
■
Do not modify the polarized plug to fit a
non-polarized outlet or extension cord.
■
Do not leave vacuum cleaner unattended
when it is plugged in.
■
Unplug from outlet when not in use and
before servicing.
■
Unplug before attaching the TurboBrush Tool.
■
Do not use outdoors or on wet surfaces.
■
Do not allow children to operate vacuum
cleaner or use as a toy.
■
Close attention is necessary when used by or
near children.
■
Do not use for any purpose other than
described in this user’s guide.
■
Use only manufacturer’s recommended attachments.
■
Do not use with damaged cord or plug.
■
If appliance is not working as it should, has
been dropped, damaged, left outdoors, or
dropped into water, have it repaired at an
authorized service center.
■
Do not pull or carry by cord, use cord as a
handle, close a door on cord, or pull cord
around sharp edges or corners. Do not run
appliance over cord. Keep cord away from
heated surfaces.
■
Do not unplug by pulling on cord. To unplug,
grasp the plug, not the cord.
■
Do not handle vacuum cleaner or plug with
wet hands.
■
Do not put any object into openings. Do not
use with any opening blocked; keep openings
free of dust, lint, hair, and anything that may
reduce air flow.
■
Keep hair, loose clothing, fingers, and all parts
of body away from openings and moving parts.
■
Turn off all controls before plugging or unplugging vacuum cleaner.
■
Use extra care when cleaning stairs.
■
Do not pick up flammable materials (lighter fluid,
gasoline, kerosene, etc.) or use in the presence
of explosive liquids or vapors.
■
Do not pick up toxic material (chlorine bleach,
ammonia, drain cleaner, etc.).
■
Do not use vacuum cleaner in an enclosed
space filled with vapors given off by oil base
paint, paint thinner, some moth proofing
substances, flammable dust, or other explosive
or toxic vapors.
■
Do not pick up hard or sharp objects such as
glass, nails, screws, coins, etc.
■
Do not pick up anything that is burning
or smoking, such as cigarettes, matches,
or hot ashes.
■
Do not use without filters in place.
■
Use only on dry, indoor surfaces.
■
Keep appliance on a level surface.
■
Do not carry the vacuum cleaner while it
is running.
SAVE THESE
INSTRUCTIONS.
FOR FUTURE USE
THIS APPLIANCE
HAS A
POLARIZED
PLUG.
To reduce the risk of electric shock, this
appliance has a polarized plug (one blade
is wider than the other). This plug will fit in
a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a qualified
electrician to install a proper outlet. Do not
change the plug in any way.
This model is for household use only.
www.bissell.com 800.237.7691
3
![](/html/0b/0be1/0be172ad379b2881dd27710e629e1fdb20a9b4e2d16bf5acbd8cf4209541c6a7/bg4.png)
Product view
Handle
TurboBrush
Tool
Tank Release
Button
Carry Handle
Lid Release
Button
Pre-Motor
Filter (located
inside Dirt
Tank lid)
Bottom Easy
Empty™
Dirt Tank
Post-Motor
Filter
Height
Adjustment
Knob
®
Cord Clip
Upper Hose
Wrap
Stretch
Hose
Crevice
Tool
Power
Switch
Power
Cord
Handle
Release
Pedal
Dusting
Brush
Quick
Release
Cord
Wrap
Extension
Wand
Extension
Wand Clip
Hose
Wand
Hose
Wand
Base
®
Furniture
Protection Guard
WARNING:
Do not plug in your vacuum cleaner
until you are familiar with all instructions and operating procedures.
Powerfoot
Foot Hose
WARNING:
Plastic film can be dangerous. To
avoid danger of suffocation, keep
away from babies and children.
4
www.bissell.com 800.237.7691
![](/html/0b/0be1/0be172ad379b2881dd27710e629e1fdb20a9b4e2d16bf5acbd8cf4209541c6a7/bg5.png)
Assembly
The only tool you’ll need to assemble your
vacuum cleaner is a Phillips head screwdriver.
2.
Attach handle to vacuum
1. Locate the vacuum handle and remove
the screw packet taped to the handle.
The screw packet contains two screws of
equal length.
2. Stand the vacuum upright and slide the
base of the handle firmly into the open-
4.
ing at the top of the vacuum body.
3. Check to be sure the handle is fitted to
the vacuum body. If there are any gaps
between the handle and the vacuum
base, continue to push the handle firmly
into the base until the handle is flush.
4. Insert the two screws from the screw
packet into the existing holes. Push
each screw firmly into the hole before
beginning to secure the screw with a
Phillips head screwdriver. If the handle
is aligned properly on the vacuum base,
you should be able to push the screw
almost entirely into the hole until only the
screw head is visible. Tighten the screw
with a Phillips head screwdriver by rotating the screw clockwise.
Attach vacuum hose, clips & tools
1. Attach the extension wand clip by insert-
ing the clip into the back of the vacuum
base and twisting clockwise. Mount the
extension wand (with crevice tool inside)
on the back of the vacuum.
2. Snap the upper cord wrap into the sock-
et located above the extension wand
clip. Wrap the power cord around the
cord wrap clips.
3. Attach the Twist 'n Snap™ hose by
lining up the tabs on the cuff with the
corresponding notches on the back of
the vacuum. Twist the Twist 'n Snap hose
clockwise to lock the hose into place.
4. Slide the end of the hose wand into the
hose wand base, and fold the hose over
the upper hose wrap.
NOTE: The powerfoot will not
suction properly unless the hose
wand is firmly attached.
5. Slide the dusting brush into the opening
below the upper hose wrap.
6. The TurboBrush Tool secures to the back
of the handle in the mount above the
Upper Hose Wrap.
www.bissell.com 800.237.7691
1.
2.
3.
4.
6.
5.
2.
3.
1.
3.
4.
5