Bissell 33A1W User Manual

PET

™

USER GUIDE

CORDED HAND VACUUM

POWERLIFTER

33A1W SERIES

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING YOUR VACUUM.

Always connect to a polarized outlet (one slot is wider than the other). Unplug from outlet when not in use and before conducting maintenance. When using an electrical appliance, basic precautions should be observed, including the following:

WARNING

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY:

» Always connect to a polarized

outlet (one slot is wider than the other). Do not modify the polarized plug to fit a non-polarized outlet or extension cord.

» Do not leave vacuum cleaner

when it is plugged in. Unplug from outlet when not in use and before servicing.

» Do not use outdoors or on

wet surfaces.

» Do not allow to be used as a toy.

Close attention is necessary when used by or near children.

» Do not use for any purpose other

than described in this User’s Guide. Use only manufacturer’s recommended attachments.

» Do not use with damaged cord or

plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, have it repaired at an authorized service center.

» Do not pull or carry by cord, use

cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.

» Do not unplug by pulling on

cord. To unplug, grasp the plug, not the cord.

» Do not handle plug or vacuum

cleaner with wet hands.

» Do not put any object into

openings. Do not use with any opening blocked; keep openings free of dust, lint, hair, and anything that may reduce air flow.

» Keep hair, loose clothing, fingers,

and all parts of body away from openings and moving parts.

» Turn off all controls before

plugging or unplugging vacuum cleaner.

» Use extra care when cleaning

on stairs.

» Do not use to pick up flammable

or combustible materials (lighter fluid, gasoline, kerosene, etc.) or use in areas where they may be present.

» Do not use vacuum cleaner in an

enclosed space filled with vapors given off by oil base paint, paint thinner, some moth proofing substances, flammable dust, or other explosive or toxic vapors.

» Do not use to pick up toxic

material (chlorine bleach, ammonia, drain cleaner, etc.).

» Do not pick up anything that is

burning or smoking, such as

cigarettes, matches, or hot ashes. » Do not use without filters in place. » Do not pick up hard or sharp

objects such as glass, nails, screws,

coins, etc. » Keep appliance on a level surface.

SAVE THESE INSTRUCTIONS

This model is for household use only.

WARNING

Plastic ﬁlm can be dangerous. To avoid danger of suocation, keep away from babies and children.

WARNING

Do not plug in your vacuum cleaner until you are familiar with all instructions and operating procedures.

WARNING

Do not operate cleaner with damp or wet ﬁlters or without ﬁlters in place.

THIS APPLIANCE HAS A POLARIZED PLUG

To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a proper outlet. Do not change the plug in any way.

www.BISSELL.com

Th for buying a BISSELL vacuum

We’re glad you purchased a BISSELL vacuum. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system.

Your BISSELL vacuum is well made, and we back it with a limited one-year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Care department, so, should you ever have a problem, you’ll receive fast, considerate assistance.

My great-grandfather invented the floor sweeper in 1876. Today, BISSELL is a global leader in the design, manufacture, and service of high quality homecare products like your BISSELL vacuum.

Thanks again, from all of us at BISSELL.

Safety Instructions...........2

Product View................4

Assembly ...................4

Operations ................4-5

Maintenance & Care .........6

Troubleshooting .............6

Warranty ....................7

Service ......................7

Consumer Care..............8

Product Registration.........8

Mark J. Bissell Chairman & CEO

www.BISSELL.com

Product View

1 Handle 2 Power Switch 3 Dirt Container Release Latch 4 Dirt Container 5 Nozzle Release Button 6 Flexible Rubber Contour Nozzle 7 Filter Screen 8 Pre-Motor Filter 9 Exhaust 10 16ft. Power Cord with Cord Wrap System

Asmbly

Your unit will come assembled and will require no tools to put together.

WARNING

Do not plug in your vacuum cleaner until you are familiar with all instructions and operating procedures.

Operatis

Power switch

The power switch is located on the end of the curved handle.

To turn hand vacuum ON ( I ), press up. To turn hand vacuum OFF ( 0 ), press down.

www.BISSELL.com

ATTENTION

For best performance, dirt container and ﬁlter assembly should be cleaned after every use.

Operatis

Cleaning with hard nozzle

1. Turn hand vacuum OFF.

2. Remove flexible rubber nozzle by pressing

down on round nozzle release button.

3. Replace with hard nozzle by lining up the bottom of nozzle to the bottom of the dirt container. Pivot upwards to snap into place.

4. Make sure the nozzle has snapped securely into place before using.

Cleaning with flexible rubber contour nozzle

1. Turn hand vacuum OFF.

2. Remove hard nozzle by pressing down on

round nozzle release button.

3. Replace with flexible rubber contour nozzle by lining up the bottom of nozzle to the bottom of the dirt container. Pivot upwards until it snaps into place.

4. Make sure the nozzle has snapped securely into place before using

Emptying the dirt container

Empty the dirt container after each use. A full dirt container may reduce suction or performance of vacuum.

1. Turn hand vacuum OFF.

2. Unplug hand vacuum from electrical outlet.

3. Press dirt container release latch down to

disconnect dirt container and filter assembly from the unit.

4. Remove filter by grasping tabs on both sides of filter frame and pulling away from the dirt container. For best results, periodically tap filter assembly against trash can to remove dirt that has collected on the screen and filter.

5. Empty dirt into trash can.

6. Replace filter assembly by aligning side

labeled “TOP” into top of dirt container. Grasp filter tabs and press firmly to ensure filter assembly is secure in dirt container.

NOTE: Make sure side of filter assembly labeled “TOP” faces outward when inserting filter assembly into dirt container.

7. Reattach dirt container to unit by aligning bottom of dirt container to bottom of unit. Pivot upwards and snap into place. Use one hand to hold the unit and use the other hand to clip the dirt container securely in place.

2. 3.

WARNING

Do not operate cleaner with damp or wet ﬁlters or without vacuum bags and all ﬁlters in place.

www.BISSELL.com

+ 11 hidden pages