Bissell 2806, 2987 User Manual

Download

Page 1

TURBOCLEAN

™

POWERBRUSH PET

Series 2806, 2987

What’s in the Box? ......................................................... 2

Assembly .............................................................................. 3

Cleaning Formulas ......................................................... 3

Filling the Clean Water Tank....................................4

Cleaning Your Carpet ...................................................4

Emptying the Dirty Water Tank ............................ 5

After-Cleaning Care ...................................................... 6

Replacing the Belt & Brush Roll ........................... 7

Storing Your Machine ................................................... 8

Troubleshooting ............................................................... 8

Warranty ...............................................................................8

Product Overview

1. Upper Handle

2. Spray Trigger

3. Middle Handle

4. Clean Water Tank

5. Dirty Water Tank Handle

6. Dirty Water Tank

7. Lower Body

8. Nozzle

Go online for a comprehensive walkthrough of your new purchase!

This guide has everything you need to get ready for first use, including setting up, using and maintaining your machine, but online you’ll find additional resources like tips and troubleshooting, videos, product registration, parts, and more. Go to support.BISSELL.com.

Page 2

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING YOUR APPLIANCE.

When using an electrical appliance, basic precautions should be observed, including the following:

» Conne ct to a properly grou nded outlet only. See g rounding instru ctions. Do

not modify the 3-prong grounded plug.

» Do not le ave appliance when i t is plugged in. Unp lug from outlet when n ot

in use and b efore servicing.

» Use indoors only. » Do not al low to be used as a toy. Close atte ntion is necessa ry when used by

or near children.

» Do not us e for any purpose oth er than describe d in this user guide. U se only

manufacturer’s recommended attachments.

» Do not us e with damaged cord o r plug. If applian ce is not working as it

should, or has been dropped, damaged, left outdoors, or dropped into water, have it repai red at an authorized s ervice center.

» Do not p ull or carry by cord, u se cord as a handle, clo se a door on cord, or

pull cord aro und sharp edges o r corners. Do not r un appliance over cor d. Keep cord away fr om heated surface s.

» Do not un plug by pulling on cor d. To unplug, grasp th e plug, not the cord. » Do not ha ndle plug or appl iance with wet hands. » Do not c arry the applian ce while in use. » Do not p ut any object into ope nings. Do not use wi th any opening bloc ked;

keep open ings free of dust, lin t, hair, and anything t hat may reduce air flow.

» Keep ha ir, loo se clothing, fing ers, and all par ts of body away from op enings

and moving p arts.

» Turn OFF all controls before plugging or unplugging appliance. » Use ex tra care when clean ing on stairs. » Do not us e to pick up flammabl e or combustible ma terials (lighter flu id,

gasolin e, kerosene, etc.) or use in a reas where they may be pr esent.

» Do not us e appliance in an en closed space fill ed with vapors given o ff by

oil-based paint, paint thinner, some moth-proofing substances, flammable dust, or ot her explosive or toxic va pors.

» Do not us e to pick up toxic material (chlo rine bleach, amm onia, drain

cleaner, etc.).

» Do not pi ck up anything that is b urning or smokin g, such as cigarette s,

matches or h ot ashes.

» Use on ly BISSELL® cleaning pro ducts intende d for use with this appl iance to

prevent internal component damage. See the Cleaning Formulas section of this guid e.

» Do not im merse. Use only o n surfaces moiste ned by the cleaning p rocess. » Keep ap pliance on a level sur face. » Always in stall float befor e any wet pick-up operatio n.

SAVE THESE INSTRUCTIONS

WARNING TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:

THIS MODEL IS FOR HOUSEHOLD USE ONLY. COMMERCIAL USE OF THIS UNIT VOIDS THE MANUFACTURER’S WARRANTY.

WARNING

Improper connection of the equipment-grounding conductor can result in a risk of ele ctrical shock. C heck with a qualifi ed electrician or s ervice person i f you aren’t sure if the o utlet is properly gro unded. DO NOT MODI FY THE PLUG . If it will not fit the outl et, have a proper outle t installed by a qualifi ed electrician . This appliance is d esigned for use on a no minal 120-volt circuit, a nd has a grounding at tachment plug th at looks like the plu g in the illustra tion. Make certai n that the appliance i s connected to an outl et having the same co nfiguration as th e plug. No plug ada pter should be used wi th this appliance.

GROUNDING INSTRUCTIONS

This appl iance must be conne cted to a grounded wiring sys tem. If it should mal function or brea k down, grou nding provides a sa fe path of least resistan ce for electrica l current, reducin g the risk of electr ical shock. The co rd for this applian ce has an equipment-grounding conductor and a groundi ng plug. It must only b e plugged into an ou tlet that is properly install ed and grounded in a ccordance with all lo cal codes and ordi nances.

Grounded Outlets

Grounding

What’s in the Box?

Standard accessories may vary by model.To identify what should be included with your purchase, please refer to the “Carton Contents” list located on the carton top flap.

Upper Handle Middle Handle Dirty Water Tank

and Lower Body

2 BISSELL.com

Clean Water Tank Trial-Size Formula

Page 3

Assembly

Go to support.BISSELL.com for assembly videos.

1. Slide Middle Handle onto

Lower Body until it “clicks” into place.

2. Slide Upper Handle into

Middle Handle until it “clicks” into place.

3. Place Clean Water Tank on

handle and push down until it “clicks” into place.

4. Wrap up power cord.

Cleaning Formulas

View our family of carpet cleaning formulas for your family of mess makers at BISSELL.com.

Keep plenty of BISSELL® formulas on hand so you can clean whenever it fits your schedule. Always use genuine BISSELL formulas in your machine. Other formulas may harm the machine and void the warranty.

Pretreat Machine Formula

PET PRO OX Y Stain Destroyer

Permanently removes tough pet s tains & odors with OXY.

Certain t rademarks us ed under licens e from The Proc ter & Gamble Compa ny or its affilia tes.

Clean + Refresh

Powerful cleaning and odor elimination with Febreze freshness

PET Stain & Odor

Removes tough pet stains. Includes

StainProtect™ to protect against future stains

PRO MAX Clean + P rotect

Our mos t powerful formula for tough, ground -in dirt & stain s.

Includes StainProtect to protect against future stains

PET PRO OX Y Urine Eliminator

Our best formula for pet urine stains & odors. Includes

StainProtect to protect against future stains

WARNING To reduce the risk of ﬁ re and electric shock due to internal component damage, use only BISSELL

cleaning formulas intended for use with the carpet cleaning device.

BISSELL.com 3

Page 4

Filling the Clean Water Tank

For additional tips and tricks on filling your Clean Water Tank visit support.BISSELL.com.

1. Remove the Clean Water

Tank by lifting straight up and away from the machine.

4. Add BISSELL formula to the

FORMULA line.

2. Unscrew the cap at the

bottom of the tank.

5. Replace and tighten the

cap.

3. Fill with hot (140°F/60°C

MAX) tap water to the WATER line. Do not use boiling water.

Do not heat water and/or tank in the microwave.

6. Replace the tank on the

machine until it “clicks” into place.

Cleaning Your Carpet

For additional carpet cleaning tips, head to support.BISSELL.com.

Tips Before Cleaning

• If cleaning an entire room, consider moving your furniture to another area.

• Use a dry vacuum cleaner over area before using your deep cleaner.

• Remove any large, solid debris before wet cleaning.

• Pretreat stains with BISSELL® Pretreat to improve performance on coffee stains and ground-in dirt.

1. Plug into a proper outlet. 2. Turn the machine ON by

pressing the power switch.

4 BISSELL.com

3. Step on the recline pedal

located below the power switch, and pull back on handle to recline.

CONTINUED O N NEX T PAGE

Page 5

Cleaning Your Carpet

(continued)

4. Make cleaning passes as described below. Repeat these passes until solution being pulled up

appears clean. Empty the Dirty Water Tank and refill the Clean Water Tank as needed.

1. Hold Spray Trigger

• 1 pass forward

• 1 pass back

2. Release Spray Trigger

• 1 pass forward

• 1 pass back

Emptying the Dirty Water Tank

For maintenance how-to videos, visit support.BISSELL.com.

1. Turn OFF and unplug your

machine.

4. Lift tab on the top of the

tank.

2. Release Dirty Water Tank

by pulling out and up on the latches on the side.

5. To empty, pour out dirty

water using opening at back of tank. Rinse the tank thoroughly. Reinsert tab into tank.

3. Carefully remove tank by

lifting up on the Dirty Water Tank Handle.

6. To continue cleaning, align

the bottom of the tank to the base and secure into place with latches.

IMPORTANT

» Please check manufacturer’s tag before cleaning area rugs for any specialized cleaning instructions. We do not recommend deep

cleaning delicate, silk, wool, antique, or area rugs without a manufacturer’s tag.

» Do not overwet carpet. Be careful not to run over loose objects or edges of area rugs. Stalling the brush may result in premature

belt failure.

BISSELL.com 5

Page 6

After-Cleaning Care

For more tips on maintaining your machine, visit support.BISSELL.com.

1. Turn OFF and unplug your

machine. Follow steps 2 & 3 in the section above to remove the Dirty Water Tank.

4. Ensure the Dirty Water Tank

is empty by gently removing the float stack and unscrewing the ring at the bottom of the tank. Follow steps 4 & 5 on page 5.

2. Grab the top of the Nozzle

and pull it up and away from the machine. Rinse or wipe it clean. Use a cloth to wipe debris from the red filter.

5. Clean and rinse debris from

the float. Keeping the float clean prevents your Dirty Water Tank from overflowing and ensures the seal stays intact.

3. Use cloth to wipe brush roll

cover clean.

6. Once clean, assemble by

aligning the arrow on the float with the notch on the tank. Then, return the ring and twist to lock. Make sure it’s fully aligned, so water doesn’t leak.

7. To replace the Nozzle, align

top into channel in front of red filter and press in place.

8. Use both hands to push the

bottom portion of Nozzle into place.

9. Once Dirty Water Tank is

dry align the bottom of the tank to the base and secure into place with latches.

ATTENTION If you experience no suction, remove the Dirty Water Tank and ensure the Nozzle is secured and

latched appropriately. Return Dirty Water Tank to the machine and try cleaning again.

WARNING To reduce the risk of ﬁ re, electric shock or injury, turn power OFF and disconnect plug from

electrical outlet before performing maintenance or troubleshooting.

6 BISSELL.com

Page 7

Replacing the Belt & Brush Roll

For maintenance how-to videos, visit support.BISSELL.com.

1. Turn OFF and unplug your

machine. Use a Phillips-head screwdriver to remove the 3 screws.

4. Pull belt off of motor shaft. 5. Wrap new belt around

7. Align Brush Roll mount to

screw post.

2. Remove belt cover. 3. Pull Brush Roll out and

motor shaft.

8. Reposition belt cover. 9. Reinstall 3 screws.

remove belt from track.

6. Put the belt on the Brush

Roll track. Put the Brush Roll back into position.

Any other maintenance or servicing not included in this manual should be performed by an authorized service representative.

WARNING To reduce the risk of ﬁre, electric shock or injury, turn power OFF and disconnect plug from

electrical outlet before performing maintenance or troubleshooting.

BISSELL.com 7

Page 8

Storing Your Machine

Visit support.BISSELL.com for additional maintenance tips for your machine.

Store your ma chin e in a protected , dr y area. When finished using the product, wrap cord around cord wrap for storage.

NOTICE: To reduce the risk of a leaking condition, do not store machine where freezing may occur. Damage to internal components may result.

Troubleshooting

For a comprehensive walkthrough of your product and support tips visit support.BISSELL.com.

Warranty

1-Year limited warranty, may vary by state. Visit support.BISSELL.com or call 1-800-237-7691

for complete warranty information.

We’re Waggin’ Our Tails!

BISSELL® proudly supports BISSELL Pet Foundation® and its mission to help save homeless pets. When you buy a BISSELL product, you help save pets, too. We’re proud to design products that help make pet messes, odors and pet homelessness disappear. Visit BISSELLsavespets.com to learn more.

But wait, there’s more!

Join us online for a complete guide to your new product, including

troubleshooting, product registration, parts and more.

Go to support.BISSELL.com.

VIDEOSINFOREGISTER PAR TS SUPPORT