More of a video
person? Look for this
icon and go online
for an instructional
how-to video at
www.BISSELL.ca
Built for Pet Owners
CleanShot
Use the on-board
pretreat CleanShot at
any time while deep
cleaning your carpet
to target and
remove tough
stains and
odors.
EZ Clean Brush Roll Cover
BISSELL’s first deep cleaner with a nozzle and brush
roll cover that’s simple to remove and clean after use.
by Pet Owners
New!
Specialized
Pet Tools
Easily vacuum and deep clean your
upholstery with
the new 2-in-1 Pet
Upholstery Tool.
Remove Pet Hair,
Stains and Odors
with a single tool.
Dry Mode:
Use the green switch
to change cleaning
modes. Begin with
Dry Mode to vacuum
and remove hair and
debris. Use a raking
motion to engage the
rubber and attract hair
to the suction channel.
Wet Mode:
Switch to Wet Mode
to deep clean. Keep
the tool in contact
with the surface and
press the trigger to
release spray while
pulling the tool
toward you.
Quick Start Guide
Assembly
WARNING
Do not plug in your deep cleaner until you are familiar with all instructions
and operating procedures.
Your deep cleaner
comes in four
easy-to-assemble
components and
an accessory bag.
• Base
• Upper Handle
• Clean Water Tank
• Carry Handle
1
First, insert the
(aluminum)
Upper Handle at
the top of the
base until you
hear a “click”.
Do NOT put
the clean tank
on the machine
until Step 5.
34
A Phillips screwdriver is
required for Assembly in
Step 3.
2
click
Next, align the carry handle with the slots
on either side of the base (behind the
power switch and cleaning mode switch).
The carry handle will “click” into place.
5
Use a Philips screwdriver
to secure the screw (found
taped to upper handle)
into the carry handle.
Wrap the cord around
the carry handle and
Quick Release™ Cord
Wrap hook.
Side
View
At the bottom of the
upper handle, align the
clean water tank with
the grooves and slide
the tank into place.
www.BISSELL.com
24
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING YOUR DEEP CLEANER.
When using an electrical appliance, basic precautions should be observed, including the following:
WARNING
TO REDUCE THE RISK OF FIRE,
ELECTRIC SHOCK, OR INJURY:
» Connect to a properly
grounded outlet only. See
grounding instructions. Do not
modify the 3-prong grounded
plug.
» Do not leave appliance when
it is plugged in. Unplug from
outlet when not in use and
before servicing.
» Do not expose to rain. Store
indoors.
» Do not allow to be used
as a toy. Close attention is
necessary when used by or
near children.
» Do not use for any purpose
other than described in
this User’s Guide. Use only
manufacturer’s recommended
attachments.
» Do not use with damaged
cord or plug. If appliance is
not working as it should, or
has been dropped, damaged,
left outdoors, or dropped into
water, have it repaired at an
authorized service center.
» Do not pull or carry by cord,
use cord as a handle, close
a door on cord, or pull cord
around sharp edges or corners.
» Do not run appliance over
cord. Keep cord away from
heated surfaces.
» Do not unplug by pulling on
cord. To unplug, grasp the
plug, not the cord.
» Do not handle plug or
appliance with wet hands.
» Do not put any object into
openings. Do not use with
any opening blocked; keep
openings free of dust, lint, hair,
and anything that may reduce
air flow.
» Keep hair, loose clothing,
fingers, and all parts of body
away from openings and
moving parts.
» Turn off all controls before
plugging or unplugging
appliance.
» Use extra care when cleaning
on stairs.
» Do not use to pick up
flammable or combustible
materials (lighter fluid, gasoline,
kerosene, etc.) or use in areas
where they may be present.
» Do not use appliance in an
enclosed space filled with
vapors given off by oil base
paint, paint thinner, some
moth proofing substances,
flammable dust, or other
explosive or toxic vapors.
» Do not use to pick up toxic
material (chlorine bleach,
ammonia, drain cleaner, etc.).
» Do not pick up anything that
is burning or smoking, such
as cigarettes, matches, or hot
ashes.
» Use only BISSELL cleaning
products intended for use
with this appliance to prevent
internal component damage.
See the Cleaning Formula
section of this guide.
» Do not immerse. Use only on
surfaces moistened by the
cleaning process.
» Keep appliance on a level
surface.
» Do not carry the appliance
while in use.
» Always install float before any
wet pick-up operation.
» Unplug before connecting
TurboBrush® Tool.
SAVE THESE INSTRUCTIONS
FOR FUTURE USE
This model is for household use only. Commercial use of this unit voids the manufacturer’s warranty.
WARNING
Improper connection of the equipment-grounding
conductor can result in a risk of electrical shock. Check
with a qualified electrician or service person if you
aren’t sure if the outlet is properly grounded. DO NOT
MODIFY THE PLUG. If it will not fit the outlet, have a
proper outlet installed by a qualified electrician. This
appliance is designed for use on a nominal 120-volt
circuit, and has a grounding attachment plug that
looks like the plug in the illustration. Make certain
that the appliance is connected to an outlet having
the same configuration as the plug. No plug adapter
should be used with this appliance.
GROUNDING INSTRUCTIONS
This appliance must be connected to a grounded
wiring system. If it should malfunction or break down,
grounding provides a safe path of least resistance for
electrical current, reducing the risk of electrical shock.
The cord for this appliance has an
equipment-grounding conductor
and a grounding plug. It must
only be plugged into an outlet
that is properly installed and
grounded in accordance with
all local codes and ordinances.
www.BISSELL.ca
Grounded
Outlet
Grounding Pin
5
Thanks for buying a BISSELL carpet cleaner!
We love to clean and we’re excited to share one of our innovative products
with you. We want to make sure your carpet cleaner works as well as it
does today for years to come, so this guide has tips on using (pages 10-13),
maintaining (pages 16-19), and if there’s a problem, troubleshooting (page 20).
In just a few simple assembly steps, you’ll be ready to deep clean. Flip to the
front and let’s get started!
Package Contents
1. Upper Handle
2. 1 Screw attached to
Upper Handle
1.2.3.4.
5.6.7.
3. Base with Dirty Water Tank
4. Clean Water Tank
5. Carry Handle
6. BISSELL Professional Pet
Urine Eliminator + Oxy
7. BISSELL Deep Clean +
Sanitize Trigger (Trigger
not pictured)
8. Accessory bag & hose
9. Tough Stain Tool
10. 2-in-1 Pet Upholstery Tool
11. Nozzle Clean Out Tool
8.
9.
Assembly: Cover/Quick Start Guide
Safety Instructions..............5
Product View................... 7
Cleaning Formulas............8-9
Operations ..................10-13
Hose, Tools & CleanShot .....14-15
www.BISSELL.ca
6
10.
NOTE: Standard accessories
11.
may vary by model. To identify
what should be included with
your purchase, please refer
to the “Carton Contents” list
located on the carton top flap.
Maintenance & Care .........16-19
Troubleshooting ...............20
Warranty .......................21
Service .........................21
Product Registration...........22
Parts & Supplies ...............22
Getting to Know Your Deep Cleaner
In-Use
Cord Clip
Upper
Handle
Carry
Handle
Rubber
Tab
Quick
Release™
Cord Wrap
Recline
Pedal
Cleaning Mode
Switch
CleanShot®
Button
EdgeSweep®
Brushes
Foot
Easy Fill/
Formula Cap
Float
Stack
Spray Trigger
Clean Water Tank
(1 Gallon Capacity)
Power
Button
Dirty Water Tank
Belt Access
Door
Nozzle
Belt/Brush
Access Plate
www.BISSELL.ca
7
Cleaning Formulas
WARNING
To reduce the risk of fire and electric shock due to internal component damage, use only
BISSELL cleaning fluids intended for use with the deep cleaner.
Keep plenty of genuine BISSELL formula
on hand so you can clean and protect
whenever it fits your schedule.
Always use genuine BISSELL deep
cleaning formulas. Non-BISSELL
cleaning solutions may harm the
machine and may void the warranty.
ONLY BISSELL Protects from future stains with Scotchgard™ Protector.
Scotchgard™ is a trademark of 3M®.
*2.5 fl. oz. of 2X concentrated formula is equivalent to 5.0 fl. oz. of non-concentrated formula.
Tips Before Carpet Cleaning
• If cleaning an entire room, consider moving your furniture to another area.
• Remove any dry debris or loose impediments before using your deep cleaner.
• Pre-treat stains with BISSELL PreTreat to improve performance on coee
stains and ground-in dirt.
www.BISSELL.ca
8
*on soft surfaces in one minute and on carpet (not for
use on polypropylene/olefin or wool fibres) in one hour.
stains, &
pet odor
Customize Your Clean & Maximize Your Results
ELIMINATE PET URINE,
STAINS & ODORS
Our best formula for
pet urine, stains, and
odors. Permanently
remove all three from
your carpet!
To Clean Dark Stains:
Remove stains permanently!
Use BISSELL Deep
Clean + Oxy formula
or add BOOST OXY
to any of your favorite
BISSELL formulas to
maximize the stain
removal power.
For Pet Stains & Odors:
Erase pesky stains
& remove odors!
Pretreat pesky
pet stains with
BISSELL Pretreat
spray before
using your deep
cleaner. Choose
a BISSELL pet
formula for your
deep cleaner and
clean as directed.
To Remove Ground-In Dirt:
Renew your carpet!
Pretreat ground-in
dirt with a BISSELL
Pretreat Spray.
Choose BISSELL
Professional Deep
Cleaning formula
and pair with a
BISSELL Boost
to enhance your
cleaning.
To Refresh Your Home:
Choose your favorite scent!
To Sanitize In-Between
Deep Cleaning:
Use BISSELL Deep Clean + Sanitize
Pair your carpet
cleaner with
BISSELL
Febreze™
formulas to
give your home
a clean and
refreshing scent.
Use BISSELL Deep
Clean + Sanitize
in between deep
cleaning to kill 99.9%
of bacteria on soft
surfaces in one minute
and on carpet (not for
use on polypropylene/
olefin or wool fibres)
in one hour.
Always use genuine BISSELL deep cleaning formulas. Non-BISSELL
cleaning solutions may harm the machine and may void the warranty.
www.BISSELL.ca
9
Filling Your Clean Water Tank:
1
The clean water tank
is at the top of the
machine.
Clean Water Tank
(1 Gallon)
Dirty Water Tank
3
Unscrew the cap
from the clean water
tank. Add hot tap
water to the water fill
line. Next, reference
the chart below for
formula amounts to
add to the tank. Twist
cap back into place.
2
Lift the clean water tank straight up to
remove from the machine.
4
At the bottom of the upper handle, align
the clean water tank with the grooves and
slide the tank into place.
FORMULA FILLING
INSTRUCTIONS
BISSELL 2X
Concentrated Formulas
DEEP CLEAN MODEEXPRESS CLEAN MODE
Fill water to the Water Fill
Line that is next to DEEP
CLEAN MODE on the Clean
Tank. Add 2.5 oz of formula.
Fill water to the Water Fill
Line that is next to EXPRESS
CLEAN MODE on the Clean
Tank. Add 1.25 oz of formula.
NOTE: Fill with hot (140°F/60°C MAX) tap water and add the appropriate
BISSELL solution. DO NOT USE BOILING WATER. DO NOT HEAT WATER OR TANK IN MICROWAVE. Do not substitute BISSELL 2X Formula cleaning solution
with other household cleaning products.
Pour in more power with BISSELL Boosts
• Fill tank with water and 2X formula (Step 3 above).
• Add 2 ounces of any BISSELL Boost per 1 gallon of water.
• The ProHeat 2X Revolution has a 1 gallon clean water tank.
www.BISSELL.ca
10
Cleaning Your Carpet
1
2
Select cleaning mode:
Plug into
a properly
grounded
outlet.
3
Press the power button
to turn the machine on.
Deep Clean - Delivers a deep
clean to your carpet.
Express Clean - Provides a
lighter clean with about 1 hour
of dry time.
4
NOTICE: To prevent
damage to Berber carpets,
avoid repeated strokes in
the same area.
To recline your
machine for use,
press the recline
pedal with your foot.
Deep Clean Mode:
1. Press the spray trigger to apply solution while
making 2 slow wet passes - 1 forward and 1 back.
2. Release the trigger.
3. Make 2 slow dry passes - 1 forward and 1 back, to suck up the dirty solution. (Do not hold down
the trigger for this step.)
NOTE: For best cleaning performance, clean with
your machine in Deep Clean Mode.
Express Clean Mode:
1. Press the spray trigger to apply solution while
making 2 wet passes - 1 forward and 1 back.
2. Release the trigger.
3. Make 2 dry passes - 1 forward, 1 back to suck up the dirty solution. (Do not hold down the
trigger for this step.)
NOTE: In Express Clean Mode, the dirty tank will
not get as full as when cleaning with Deep Clean
Mode.
Area Rug Cleaning
Important! Please check manufacturer’s tag before cleaning area rugs for any specialized cleaning
instructions. We do not recommend deep cleaning delicate, silk, wool, antique or area rugs without a
manufacturer’s tag.
• Check the manufacturer’s tag.
• Select Express Clean Mode.
• When cleaning area rugs, place the rug on a sealed surface to test for colorfastness in an inconspicuous
area. Your cleaner should not be used on unsealed surfaces.
• Important: Keep the foot of the deep cleaner perpendicular to the rug’s edge with each cleaning pass to
prevent damage.
Regularly clean your high-traffic area rugs in Express Clean Mode:
www.BISSELL.ca
11
Cleaning with Hose & Tool
1
Lift the accessory
hose door on top
of foot on the front
of the machine. The
door flips toward the
machine to open.
2
Insert the hose and
snap into place.
Be sure the colored
hose release clip
is facing out, away
from machine.
3
Attach the tool to the end of the hose.
(Tools may vary by model.) Press the
power button to turn machine on.
— Keep hair, loose clothing, fingers, and all parts
of body away from openings and moving parts.
Brushroll continues to rotate when in the upright
position.
— Brushroll continues to turn while product is
turned on and handle is in upright position. To avoid
damage to carpet, rugs, furniture and flooring, avoid
tipping cleaner or setting it on furniture, fringed
area rugs, or carpeted stairs during tool use.
— The brushroll remains on while cleaning with the
hose and tool. Do not allow cleaner to sit in one
location for an extended period of time, as damage
to floor can result.
4
Press the spray trigger button to spray
the soiled area, then slowly move tool back
and forth over the area.
Release the trigger to suck up the dirty
solution. Work in small sections until the
area is clean.
When finished cleaning, turn the machine
on to suction up warm clean water to rinse
the inside of the hose and tool. Detach the
hose and tool and close the accessory hose
door. Let the hose and tool air dry before
storing.
NOTE: If using the Deep Reach Tool or Pet Stain Tool be sure the needles of the
tool are pressed down into the carpet so the spray gets into the carpet fibers.
Cleaning with CleanShot
1
Press the CleanShot button
with your foot. The window
of the button will be green
and show an “I” symbol
when it is on.
www.BISSELL.ca
12
2
Spray will continue until you
turn it off. To turn CleanShot
off, press the button with
your foot. The window of the
button will be red and show an
“O” symbol when it is off.
Completely
cover the stain
with CleanShot
spray. Allow the
stain to soak. To
extract, maneuver
the foot of the
machine over the
stain to brush and
remove.
Loading...
+ 28 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.