Bissell 1844 User Manual

_______________

USER GUIDE

1844 SERIES

TM

More of a video
person? Look for this
icon and go online
for an instructional
how-to video at

BISSELL.com/videos

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING YOUR PORTABLE DOG BATH SYSTEM.

When using an electrical appliance, basic precautions should be observed, including the following:

dropped, damaged, left outdoors,

WARNING

TO REDUCE THE RISK OF FIRE,
ELECTRIC SHOCK, OR INJURY:

» Use only warm tap water. Do not

use heated water.

» Connect to a properly grounded

outlet only. See grounding
instructions. Do not modify the
3-prong grounded plug.

» Do not leave appliance when

it is plugged in. Unplug from
outlet when not in use and
before servicing.

» Do not expose to rain. Store

indoors.

» Do not allow to be used as a toy.

Close attention is necessary when
used by or near children.

» Do not use for any purpose other

than described in this User’s
Guide. Use only manufacturer’s
recommended attachments.

» Do not use with damaged

cord or plug. If appliance is not
working as it should, has been

or dropped into water, have it
repaired at an authorized service
center.

» Do not pull or carry by cord, use

cord as a handle, close a door on
cord, or pull cord around sharp
edges or corners. Do not run
appliance over cord. Keep cord
away from heated surfaces.

» Do not unplug by pulling on

cord. To unplug, grasp the plug,
not the cord.

» Do not handle plug or appliance

with wet hands.

» Do not put any object into

openings. Do not use with any
opening blocked; keep openings
free of dust, lint, hair, and
anything that may reduce air flow.

» Keep hair, loose clothing, fingers,

and all parts of body away from
openings and moving parts.

» Turn off all controls before

plugging or unplugging appliance.

» Use extra care when cleaning

on stairs.

WARNING

Improper connection of the equipment-grounding conductor can
result in a risk of electrical shock. Check with a qualified electrician
or service person if you aren’t sure if the outlet is properly grounded.
DO NOT MODIFY THE PLUG. If it will not fit the outlet, have a proper
outlet installed by a qualified electrician. This appliance is designed
for use on a nominal 120-volt circuit, and has a grounding attachment
plug that looks like the plug in the illustration. Make certain that the
appliance is connected to an outlet having the same configuration as
the plug. No plug adapter should be used with this appliance.

» Do not use to pick up flammable

or combustible materials (lighter
fluid, gasoline, kerosene, etc.)
or use in areas where they may
be present.

» Do not use appliance in an

enclosed space filled with vapors
given off by oil base paint, paint
thinner, some moth proofing
substances, flammable dust, or
other explosive or toxic vapors.

» Do not use to pick up toxic

material (chlorine bleach,
ammonia, drain cleaner, etc.).

» Do not pick up anything that

is burning or smoking, such as

cigarettes, matches, or hot ashes.
» Keep appliance on a level surface.
» Do not carry the appliance while

in use.
» Do not immerse appliance in water

or place in area where splashing

may occur.
» Liquid must not be directed

towards equipment containing

electrical components.

GROUNDING INSTRUCTIONS

This appliance must be connected to a grounded wiring system. If it
should malfunction or break down, grounding provides a safe path
of least resistance for electrical current, reducing the risk of electrical
shock. The cord for this appliance has
an equipment-grounding conductor
and a grounding plug. It must only be
plugged into an outlet that is properly
installed and grounded in accordance
with all local codes and ordinances.

Grounded
Outlets

Grounding Pin

SAVE THESE INSTRUCTIONS
FOR FUTURE USE

This model is for household use only. Commercial use of this unit voids the manufacturer’s warranty.

www.BISSELL.com

2

Thanks for buying a BISSELL BarkBath™!

We love pets, so we’re excited to share one of our newest innovative pet
products with you. We want to make sure your BarkBath™ dog bathing
system works as well in years to come as it does today, so this guide
includes tips on usage, maintenance and, if there is a problem, basic
troubleshooting.

Once your dog is acclimated to the cleaner and you’ve got a bathing area
prepared, a few simple assembly steps are all it takes to get started!

What’s In The Box?

One (1) Screw

(taped to unit handle)

Base Unit

Microfiber Mat

(to set under base unit)

16 oz. BISSELL

No-Rinse Dog Shampoo

Safety Instructions...........2

Getting Ready...............4

Product View ................5

Flex Hose

Storage
Bracket

Flex Hose Clip

Bathing Tool

Drawstring

Storage Bag

Microfiber Towel

(for cleaning faces and paws)

Maintenance & Care ......11-13

Troubleshooting ............14

Warranty ...................15

Assembly ...................6

Operations ...............7-10

Service .....................15

Product Registration........16

www.BISSELL.com

3

Before You Get Started

Helpful Tips to Get Ready:

• Always use a BISSELL no-rinse dog shampoo.

• If your dog has long hair, brush your pet’s hair
before bathing.

• When selecting an area to bathe your
dog, choose a place where your pet feels
comfortable and safe. Usual choices include the
kitchen, utility room, garage or family room.

• Lay down a separate blanket or towel where
you will be bathing your dog.

• When placing the cleaner on the floor, be sure
to set it on the microfiber mat. Not only is the
mat highly absorptive to protect your floor, it
will help to dampen the sound for your dog.

• Keep the unit away from walls and cabinets to
facilitate sound reduction.

Noise-Sensitive or Anxious Dog?

Some dogs are sensitive to loud noises, or are not fans of vacuums or other
loud appliances. Here are some quick training tips to help your dog have a great
experience with this new bathing method...

Training Steps—Phase 1

- Place the unit in a room where you

plan to bathe your dog. Leave the unit
turned off and allow the dog to become
accustomed to it.

- With the unit turned off, have the dog
walk over to the unit and use the spray
nozzle as a “comb” to brush the dog.
This will allow the dog to associate good
feelings with the unit.

- Praise your dog and offer a treat.

Training Steps—Phase 2

- With the dog out of the room, turn the

unit on. Leave the unit on and offer your
dog a treat.

- Turn the unit off.

- Repeat phase one above.

For more tips and videos, visit us
online at www.BISSELL.com/videos.

www.BISSELL.com

4

Training Steps—Phase 3

- Turn the unit on, have your dog enter the

room and give the dog a treat.

- With the unit on, and without pulling
the trigger to release water, “comb” your
dog’s fur with the spray nozzle.

- Turn the unit off and offer a treat.

Training Steps—Phase 4

- Turn the unit on. Have your dog enter

the room.

- Comb a small section of your dog’s fur
with the unit on and pull the trigger in
quick, short bursts to acclimate your pet
to feeling the solution on their skin.

- Once the area is fully wetted and water
extracted, your dog’s bath is complete.
Praise your pet and offer a treat.

Getting to Know Your Cleaner

1

17

18

2

3

4

9

11

1. Carry Handle

2. Power On/Off Switch

3. Dirty Water Tank

4. Flex Hose Clip

5. Flex Hose Storage Bracket

6. Quick Release™ Cord Wrap

7. Power Cord

8. Clean Water Tank

9. Flex Hose Connector Release

10

12

13

6

5

7

8

10. Shampoo Tool Connector

11. Rinse/Shampoo Switch

12. Shampoo Reservoir

13. Spray Nozzle

14. Nozzle Spray Trigger

15. Mesh Plate

16. Nozzle Height Selection

17. Removable Face Plate

18. Removable Face Plate Screw

16

15

BISSELL® No-Rinse Dog Shampoo

14

Always use genuine BISSELL No-Rinse Dog Shampoo. Other
shampoos may harm the machine and will void the warranty.

NOTICE: Do not use dish soap, traditional dog or human shampoos and/or
conditioners because they are too thick and may damage the machine. Use only
BISSELL No-Rinse Dog Shampoo in your Portable Dog Bath System. Use of
shampoos or soaps which contain lemon or pine oil may damage this appliance
and void the warranty. These products may react with the plastic materials used
in your cleaner, causing cracking or pitting.

www.BISSELL.com

5