Biostar U8799 Grand Owner's Manual

UU88779999 GGrraanndd

FCC Information and Copyright

This equip ment has been tested and fou nd t o com ply w it h the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules . These limits are designed to provide reas onable protection against harmful interference in a residential installation. T his equipment generates , uses and c an radiate radio frequency energy and, if not install ed and used in ac c ordance wit h the in structions, may cause harmful interfer ence to radi o communications. There is no guarantee that interference will not occur in a particular installa tion.

The vendor makes no representations or warranties with respec t to the con tents here a nd special ly disclaims any implied warranties of merchantability or fitness fo r any purpos e. F urther the vendor rese rves the right to revis e this publication and to make changes to the contents here w ithout obligat ion to notify any party beforehand.

Duplication of this public ation, in part or in whole, is not allowed without first obt ainin g the vendor’s approval in writi ng.

The con te nt of thi s u ser’s m anu al is subje ct to be chan ge d with ou t noti ce and we will not be responsible for any mistakes found in this user’s manual. All the br and an d product name s are trad emark s of their re spe ctive companies.

UU88779999 GGrraanndd

TABLE OF CONTENTS

Chapter 1: Introduction.......................................3

1.1 U8799 Grand Features...........................................3

1.2 Package Checklist..................................................4

1.3 Layout of U8799 Grand........................................5

1.4 Components of U8799 Grand................................6

Chapter 2: Hardware Installation........................7

2.1 Central Processing Unit (CPU) .............................7

2.2 Memory Modules..................................................8

2.3 Jumpers, Headers, Connectors, & Slots................8

2.4 Award BIOS beep code.......................................13

2.5 Troubleshooting...................................................14

Chapter 3: WarpS peeder™............................15

3.1 Introduction.........................................................15

3.2 System Requirement............................................15

3.3 Installation...........................................................15

UU88779999 GGrraanndd

CHAPTER 1: INTRODUCTION

1.1 U8799 GRAND FEATURES

A. Hardware

CPU

Supports Socket 478. Supports Intel Pentium 4 Processor.

Supports Intel Pentium 478-pin Prescott CPU.

- 533FSB with 1024KB L2 Cache

- Celeron D (533 FSB with 256KB L2 Cache)

- 800 FSB with 1024KB L2 Cache up to 3.2GHz.

Supports Intel Hyper-T hreading Technology. Front Side Bus at 400/533MHz.

Front Side Bus 800MHz is by overclocking

Chi pset

North Bridge: P4X533CD South Bridge: VT8235CE/VT8237CD

Ma in Memory

Supp orts up to 2 DDR devices. Supp orts 266/ 333M Hz DDR devi ces.

400MHz DDR is suppor ted by ov er cl oc king. Maximum me mo r y s iz e is 2GB.

Super I/O

Chip: ITE IT8 705AF. Provides the most commonly used legacy Super I/O

functionality.

Environment Control initiatives,

- H/W Monitor

- Fan Speed Controller (optional)

- IT E's " S mart Guardi an" functio n

Slots

Three 32-bit PCI bus master sl ots. One AGP 4x/ 8x c o mp at ib le s l ot.

One CNR slot (optional).

On Board IDE

Supports 2 IDE disk drives. Supports PIO m ode 4, Block Mode and Ultra DMA

33/ 66/10 0/133 bus mas t er mo de.

LAN

Chip: RTL8100C Supports 10 Mb/s and 100 Mb/s auto-negotiation.

Half/Ful l duplex ca pabil ity. Sup por ts ACPI/ PC I pow er ma na ge me nt

UU88779999 GGrraanndd

On Board AC’97 Sound Codec

Chip: C-Media CMI9761A Compliant with AC’97 speci fication.

AC’97 2.3 interface. Supports S /PDIF ou t fun cti on (optional).

Supports 6 channels. Supports stereo mi crophone.

On Board Peripherals

a. Rear side

1 par all el port. 1 audio ports in vertical.

1 RJ - 45 LAN jack. 1 PS/2 mouse and PS/2 mouse.

1 se r ial port. 2 USB 2.0 ports.

4 USB 2.0 ports are supported by SB VT8237CD onl y.

b. Front S i de

1 fl oppy port supports 2 FDDs with 360K, 720K, 1.2M ,

1.4 4M an d 2.88M byt es .

4 USB2.0 ports.

Dimensions

Micro-ATX Form Factor: 19.9 x 24.4 cm (W x L)

B. BIOS & Software

BIOS

Award legal BIOS. Supports APM1.2.

Supports ACPI. Supports USB Function.

Software

Sup por ts W ar pspee der ™, 9th T o uc h™, W IN FLA SH ER™

and FLASHER™.

Offers the hi ghest performance fo r Win dows 98 SE,

Windows 2000, Windows M e, Windows XP, SCO UNIX etc.

1.2 PACKAGE CHECKLIST

FDD Cable x 1 HDD Cable x 1 User’s Manual x 1 Fu lly Setup Drive r CD x 1 USB 2.0 Cable x1 (optional ) Serial ATA Cable x 1 (opti onal) S/PDIF Out Cable x 1 (optional) Rear I/O Panel for Mi cro-ATX Ca se x 1 Serial ATA Power Switch Cable x 1 (optional )

UU88779999 GGrraanndd

1.3 LAYOUT OF U8799 GRAND

Note: ● represents the 1st pin.

UU88779999 GGrraanndd

1.4 COMPONENTS OF U8799 GRAND

JC OM2-Header: COM2 H eader.*

JU SBV1: Power Source Selection f or

JU SB1 & PS/2 k eyboard/mouse. Back Panel Connec t ors

JAU DIO1: Front Audio Header

JCDIN1: CD-ROM Audio- In Header

PCI 1~3: Peripheral C om ponent

Int erc onnect Slots J S P DIF O 1 : Dig it a l Au d i o Ou t

Connector* CNR: Communication Network Riser

Slot.* FDD1: Floppy D isk Connect or

JSFA N1: S ystem Fan Header

JPANEL1: Front Panel Connect or

Note: * represents optional function.

JCM O S 1 : Cl e a r CMOS Ju mp e r

JCI1 : Case Open Connector

JU SBV2: Power Source Selection for

USB JUSB3~4: Front USB Headers

JSATA1~2: Serial ATA H eaders (with

SB VT8237CD only) * AGP1: Accelerated Graphic s Port Slot.

ID E1~2: Hard Disk Connect ors

DI MM1~2: DDR DIMM Modules

JATXPWR1: ATX Power Connec t or

JATXPWR2: ATX Power Connec t or

JCFAN 1: C PU Fan Connect or

UU88779999 GGrraanndd

CHAPTER 2: HARDWARE INSTALLATION

2.1 CENTRAL PROCESSING UNIT (CPU)

Step 1: Pull the lever sideways away from the socket and then raise

the lever up to a 90-degree angle.

Step 2: Look for the white dot/cut edge. The white dot/cut edge should

point wa rds th e lever pi vot. The CPU will fit onl y in the corre c t orientation.

Step 3: Hold the CPU down fi rmly, and then cl ose the lever to com plete

the i nstal la ti on.

Step 4: Put the CPU F an on t he CP U and buckl e it . Co nn ec t the CP U

FAN power cable to the JCFAN1. This completes the installation.

CPU FAN He ader: JC FAN1

Pin Assignment

JCFAN1

1 Ground 2 +12V 3 FAN RPM rat e sense

System Fan Header: JSFAN1

Pin Assignment

1 Ground

JSFAN1

Note:

The JCFAN1 and JSFAN1support system cooling fan with +12V. It supports 3 pin head connector. When connecti ng with

wires onto connectors, please note that the red wire i s the positive and should be connected to +12V, and the black wire

is Ground and should be connected to GND.

2 +12V 3 FAN RPM rat e sense

UU88779999 GGrraanndd

2.2 MEMORY MODULES

Supp orts up to two DDR devi ces. Supp orts 266/ 333 MHz DDR device s.

Maximum memory size i s 2 GB.

DI MM Socket

Location

DIMM1 128MB/256MB/512MB/1GB *1 DIMM2 128MB/256MB/512MB/1GB *1

DDR Module

DDR Modu le ins tallation

1. Unlock a DIMM slot by pressing the retaining clips outward. Align a DIM on the slot such that the notch on the DIMM matches the

break on the Slot.

2. Insert the DIMM vertically and firmly into the slot until the retaining chip snap back in place and the DIM M is properly seated.

Total Memor y Size

Max is 2 GB.

(MB)

2.3 JUMPERS, HEADERS, CONNECTOR S, & SLOTS

Floppy Disk Connector: FDD1

The motherboard provi des a standard floppy disk connector that s uppor t s 360K , 720 K, 1.2 M, 1.44 M and 2. 8 8 M f lo ppy d is k types. Th is

connector supports the provided floppy drive ribbon cables.

Hard Disk Connectors: IDE1~2

The motherboard has a 32-bit Enhanced PCI IDE Controller that provides PIO Mode 0~5, Bus Master, and Ul tra DMA 33/ 66/ 100 functio nalit y. It ha s two HDD c onne c to rs IDE1 (primary) an d IDE2

(secondary). The IDE connectors can connect a master and a slave drive, so you

can connect up to four hard disk drives. The first hard drive should al ways be con nected to IDE1.

Peripheral Component Interconnect Slots: PCI 1~3

This motherboard is equipped wi th 5 standard PCI sl ots. PCI stands for Peripheral Component Interconnect, and it i s a bus standard for

UU88779999 GGrraanndd

expansi on cards. T his PCI slot is designated as 32 bits.

Accelerated G raphics Port Slot: A GP1

You r mon itor will atta c h dire c tly to that vide o card. Thi s motherbo ard supports video cards for PCI slots, but it is also equipped with an

Accelerated Graphics Port (AGP). An AGP card will take advantage of AGP technology for improved video efficiency and performance,

especially with 3D graphics.

Commun icati on Netw ork R iser Slot: CNR1 (Optional)

The CNR specification is an open In du stry Standard Archi tec ture, an d it defi nes a hardware scalable riser card i nterface, which supports

modem onl y.

Serial ATA Connector: JSATA1~2 (With SB VT8237CD only)

The motherboard has a PCI to SATA Controller with 2 channels SATA interface, i t satisfies the SATA 1.0 spec and with transfer rate of

1.5Gb/s.

COM2 Header: JCOM2-Header (Optional)

This header allows user to connect additional serial cable on the PC back panel. It can be used to connect serial devi ces, for

example, mouse or modem.

910

Pin Assignment Pin Assignment

RIN1

DOUT2

Ground

DOUT1

-XRI1

JCOM2-Header

RIN3

DOUT3

RIN2

RIN4

Clos e CMOS Jumper: JCMOS1

By c onn ecting thi s j umpe r pin2 -3, it will allow u ser t o resto re the BIOS sa fe setting and the CM OS data , please carefully follow the

pr oced ur es to avo id da ma ge th e mother b oar d.

JCMOS1 Assignment

1 3

Pin 1-2 close Pin 2-3 close

Norm al Operation (D ef ault). Clear CMOS data.

※ Clear CMOS Procedures:

1. Remov e AC power line.

2. Set the jumper to “Pin 2-3 cl ose”.

3. Wait for fi ve seconds.

UU88779999 GGrraanndd

4. Set the jumper to “Pin 1-2 cl ose”.

5. Power on the AC.

6. Reset your desi red password or clear the CMOS data.

Front Panel Audio Out Header: JAUDIO1

This connector will allow user to connect with the front audio out put headers on th e P C c ase. It will disabl e the output on bac k pan el

audio connectors.

2 1

Pin Assignment Pin Assignment

1 Mic in/center 2 Ground 3 Mic power/Bas s 4 Audio power

Right line out/ Speaker

out R ight

7 Reserved 8 Key

Lef t line out/Speaker out

Lef t Right line in/R ear

speaker Right Lef t line in/R ear speak er

Lef t

14 13

JAUDIO1

Right line out/ Speaker out

Right

Lef t line out/Speaker out

Lef t Right line in/R ear speaker

Right Lef t line in/R ear speak er

Lef t

Power Sourc e Se lect io n for JUSB1, P S/2 Keyb oa r d/ M ou s e : JUSB V1

JUSBV1 Assignment Description

Pin 1-2 close

Pin 2-3 close

+5V

+5V Standby Voltage

+5V for JUSB1 and PS /2 keyboard / mouse.

JU SB1 and PS/2 key board/mous e are powered

with +5V st andby v oltage.

Note: In order to support this function “Power-on system via

keyboard and mouse”, “JUSBV1” jumper cap should be placed on Pin 2-3.

CD- ROM A udio- in H e ader: J CDI N 1

This conn ec to r will allow user to connec t the a udio source f rom t he ve riaty de v ice s, like CD-RO M, DVD-ROM, PCI sound c ard , PCI TV

turner card etc..

Pin Assignment

JCDIN1

1 Lef t channel input 2 Ground 3 Ground 4 Right channel input

UU88779999 GGrraanndd

Digi ta l Aud io Out Co nn ector: JS PDI FO1

This conn ec to r will allow user to connec t the P CI b racket S PDIF out put head er .

Pin Assignment

1 +5V 2 SPDIF OUT 3 Ground

JSPDIFO1

Case Op en Connector: JCI1

This conn ec to r will allow system to mo nito r t he P C case open statu s. If the sig nal has be en trig gered, it wi ll re cord to the CMOS

and show the message at next boot-up.

JCI1

Pin Assignment

1 Cas e open signal 2 Ground

F r ont Pa n el Conn ector: JPA N EL1

This 24-pin c on ne c tor incl ud es Powe r-on, Reset , HDD L ED, Po wer LED, Sleep button, speaker and IrDA Connection. It will allow user

to connect the PC case’s front panel switch functions.

SPK

PWR_LED

HLED

Speaker Connector

Hard driv e LED

Reset button

IrDA Connector

RS T

IRON/OFF

JPANEL1

8 Power LED (+)

12 Power LED (-)

16 Ground

24 IRRX

Sleep butt on

Power LED

Power-on button

IrDA Connector

SLP

2 123

Pin Assignment Function Pin Assignment Function

1 +5V 2 Sleep control 3 N/A 4 Ground 5 N/A 6 N/A N/A 7 Speaker 9 HDD LED (+) 10 Power LED (+)

11 H EE LED (-)

13 Ground 14 Power button 15 Reset control

17 N/A 18 Key 19 N/A 20 Key 21 +5V 22 Ground 23 IRTX

Power Source Select ion for USB: JUSBV2

JUSBV2 Assignment Description

1 3

Pin 1-2 close

1 3

Pin 2-3 close

+5V

+5V st andby Voltage

+5V for USB loc at ed at t he JU SB3~4 port connectors

JU SB3~4 port s are powered with st andby v olt age of +5V

UU88779999 GGrraanndd

Note:

In order to support this function “Power-o system via USB dev ic e,” “J U SB V 2” jump er ca p s hould be placed on P in 2- 3

individually.

Front USB Heade r: JUSB3~4

This conn ec to r will allow user to connec t wit h additional USB header on the PC case. Also can be connected with internal USB

devices, like USB card reader.

Pin Assignment Pin Assignment

JUSB3/4

1 +5V (fused) 2 +5V (f used) 3 USB- 4 USB5 USB+ 6 USB+

7 Ground 8 Ground 9 Key 10 NC

Se rial ATA co nnector JSATA1~ 2 (With SB VT82 37CD only)

The motherboard has a PCI to SATA Controller with 2 channels SAT A in te rface , it sa tisfies the SATA 1.0 sp e c and wi th tra n sfer rate

of 1.5Gb/s.

Pin Assignment Pin Assignment

1 Ground 2 TX+

1234567

JSATA1/JSATA2

3 TX- 4 Ground 5 RX- 6 RX+ 7 Ground

Pow er Conn ector s: JATX PWR1/PAT X PWR2

JA TXPWR1 : This conn ec to r will allow user to conne c t with 20 -pin power co nn ec tor on the A TX pow er s upp ly.

JATXPWR2: by connecti ng this connector, i t wi ll provi de +12V to CPU power circuit.

Pin Assignment Pin Assignment

1 +3.3V 13 +3.3V

JATXPWR1

123

JATXPWR2

2 +3.3V 14 -12V 3 Ground 15 Ground 4 +5V 16 PS_ON 5 Ground 17 Ground 6 +5V 18 Ground 7 Ground 19 Ground 8 PW_OK 20 -5V 9 Standby Voltage +5V 21 +5V

10 +12V 22 +5V 11 +12V 23 +5V 12 2 x 12 Detect 24 Ground

Pin Assignment Pin Assignment

1 +12V 3 Ground 2 +12v 4 Ground

UU88779999 GGrraanndd

Bac k Panel Connectors

6 Channel Speakers

Sp eaker O ut/

Fron t Spea kers

2.4 AWARD BIOS B EEP CODE

One long beep f ollowed by two short beeps

High-low siren sound 1. CPU overheated

One Short beep when system boot-up Long beeps every other s ec ond No DRAM detected or install

Beep Sound Meanin g

Line In/ Rear Speaker (Left & Right)

Mic In/ Center & Bass

Video card not f ound or v ideo card mem ory bad

2. Sys t em will s hut down automatically

No error found during POST

2.5 TROUBL ESHOOTING

Probable Solution

1. No power to the system at all Power light don’t illuminat e, fan

inside power supply does not turn on.

2. Indic at or light on k ey board does not t urn on.

Sys t em inoperat iv e. Keyboard lights are on, power indic at or light s are lit , and hard driv e is spinning.

Sys t em does not boot from hard disk drive, can be booted from optical drive.

Sys t em only boots from optical driv e. Hard disk can be read and applicat ions can be used but booting from hard disk is impossible.

Screen m essage say s “Invalid Conf igurat ion” or “CMOS Failure.”

Cannot boot sys t em after ins t alling sec ond hard drive.

UU88779999 GGrraanndd

1. Make sure power cable is

2. Replace cable.

3. Cont act technic al support.

Us ing even pressure on bot h ends of the DIMM, press down firm ly until the m odule snaps into place.

1. Chec k cable running f rom disk

2. Back ing up the hard driv e is

1. Back up dat a and applications

2. Ref orm at the hard drive.

Rev iew system’s equipm ent. Make sure c orrect informat ion is in setup.

1. Set m aster/slave jumpers

2. Run SETUP program and s elec

sec urely plugged in.

to disk controller board. Make sure bot h ends are securely

plugged in; check the dri ve type in the standard CMOS se tup.

ext rem ely im portant. All hard disk s are c apable of break ing

down at any t ime.

files.

Re-install applications and dat a using backup disks.

correctly.

correc t driv e types. Call t he drive m anufacturers for

com patibility with ot her drives .

UU88779999 GGrraanndd

CHAPTER 3: WARPSPEEDER™

3.1 INTRO DUCTION

[WarpSpeeder™], a new powerful control utility, features three user-friendly functions including Overclock M anager, Overvoltage

Manager, and Hardware Monitor. With the Overclock Manager, users can easi l y adjust the frequency they

prefer or they can get the best CPU performance with just one click. T he Overvol tage Manager, on the other hand, helps to power up CPU core

voltage and Memory voltage. The cool Hardware Monitor sm artly indicates the temperatures, vol tage and CPU fan speed as well as the

chipset information. Al so, in the About panel, you can get detail descriptions about BIOS m odel and chipsets. In addition, the frequency

status of CPU, memory, AGP and PCI along with the CPU speed are synchronically shown on our main panel.

Moreover, to protect users' computer systems i f the setting is not appropriate when testi ng and results i n system fail or hang,

[WarpSpeeder™] technology assures the sy stem stability by automatically rebooting the computer and then restart to a speed that is

either the origi nal system speed or a suitable one.

3.2 SYSTEM REQUIREMENT

OS Support: Windows 98 SE, Windows M e, Windows 2000, Windows XP DirectX: DirectX 8.1 or above. (The Windows XP operati ng system

incl udes DirectX 8.1. If you use Windows XP, you do not need to instal l Dir ec tX 8.1.)

3.3 INSTALL ATION

1. Exec ute the setup execut ion file, a nd t he n t he fo llowing dial og will pop up. Please click “Next” button and follow the default procedure to ins ta ll.

UU88779999 GGrraanndd

2. When you see the foll owi ng dialog in setup procedure, it m eans setup is completed. If the “Launch the WarpSpeeder Tray Utility”

checkbox i s checked, the Tray Icon utility and [WarpSpeeder™] utility will be automatically and im mediately l aunched after you

click “Finish” button.

Usage:

The following figures are just only for reference, the screen printed in this user manual will change according to your motherboard on hand.

UU88779999 GGrraanndd

[WarpSpeeder™ ] includes 1 tray icon and 5 panels:

1. Tray Icon:

Whenever the Tray Icon utility is launched, it will display a little tray icon on the right side of Windows Taskbar.

This utility is responsi ble for conveniently i nvoking [WarpSpeeder™] Utility. You can use the mouse by clicking the

left button in order to invoke [WarpSpeeder™] di rectly from the little tray icon or you can right-click the little tray i con to pop up a

popup menu as following fi gure. The “Launch Utility” item in the popup menu has the same function as mouse left-click on tray

icon and “E xi t” item will cl ose Tray Icon ut ility if se le c ted.

2. Main Panel

If y ou click the t ray icon, [Wa rpSpeeder™] utility will be invoked. Please refer to the following fi gure; the utility’s first window you

will see is Main Pane l.

Main Pane l contains feature s as foll ows:

a. Display the CPU Speed, CPU external clock, Memory clock,

AGP clock, and PCI clock information.

b. Contains About, Voltage, Overclock, and Hardware Monitor

Buttons for invoking respective panels.

c. With a us er - fr ie nd ly Status An im at io n, it c an repr esent 3

overclock percentage stages: Man walking→overcl ock percentage from 100% ~ 110 % Panther running→overclock percentage from 110% ~ 120% Ca r racing→overclock percentage from 120% ~ above

+ 37 hidden pages

Biostar U8799 Grand Owner's Manual

Specifications and Main Features

Frequently Asked Questions

User Manual