Biostar U8799 Owner's Manual
U
i
8
7
9
9
7
7
9
9
9
9
U
U
8
8
FCC Infor mation and Copyright
This equipment has been tested and found to com ply with the limits of a
Class B digital device, pursuant to Part 15 of the FCC Rules. T hese limits
are designed to provide reasonable protection against harmful
int erference in a residential ins t allation. This equipment g enerat es, uses
and can radiate radio frequency energy and, if not installed and used i n
ac cordan ce wit h the in stru ction s, ma y cau se harm fu l in terf eren ce t o radi o
communications. There is no guarantee th at interference will not occur in
a partic ular installation.
The vendor makes no repr esentations or warranties with respect to the
contents here of and specially disclaims any implied
merchantabi li ty or fitness fo r a ny purpose. F urther the vendor reserves
the right to revise this publication and to make changes to the contents
here of without obligation to notify any party beforehand.
Duplication of this publication, in part or in whole, is not allowed without
first obtaining the vendor’s approval in writing.
The con tent of this user’s manual is subject to be changed without notice
and we will not be responsible for any mistakes found in this user’s
manual. All the brand and product names are trademarks of their
r es p e c t iv e co m pa ni e s.
warran ties of
C
C
C
o
o
t
n
e
t
n
t
n
e
t
n
t
n
e
t
n
o
LA Y OU T OF U 8799 FOR VE RSION 3.1 & BELOW...........................1
LA Y OU T OF U 8799 VERSION 3.2.........................................................2
ENGLISH...................................................................................................3
U8799 Featu r es..........................................................................................3
Packag e contents.......................................................................................4
How to setup Jumper.................................................................................5
CPU Ins t alla tion......... ........................ ........................................................5
DDR DIMM Modu les: DIMM1/ DIMM2 .............................................................6
Jumpers, Headers, Connectors & Slots.........................................................7
FRANÇAIS .............................................................................................. 14
Caractéristique de U8799..........................................................................14
WARPSPEEDER..................................................................................... 16
Introdu ction.............................................................................................16
System Requirement................................................................................16
Installation ..............................................................................................17
Usage.....................................................................................................18
TROUBLE SHOOTIN G......................................................................... 26
ii
Layo ut of U879 9 f or Versi on 3.1 & bel ow
※ NOTE: ●repres ent s the first pin.
1
Layo ut of U879 9 Versi on 3.2
JK B M S1
M ouse &
K eyboard
JUSB 1
JUSB LAN 1
JAUDIO
JK B V 1
1
1
JU SBV 1
U SB
JC O M 1
JC O M 2
2
1
JAUDIO1
JCDIN1
CO DEC
JPRNT1
1
IT E I/O
JU SB V 2
1
14
JATX PW R1
13
V T 61 03
J S P D I F _ IN 1 (o p tio n al)
1
JAT XPW R 2
1
PCI SLO T
1
PCI SLO T
S ocke t 47 8
JD J1
AGP SLOT
JS PD IF_O U T 1
PCI SLO T
BIOS
CN R1
CNR SLOT
JW O L 1
※ NOTE: ●repres ent s the first pin.
PU
CPU 1
P4X 400
PC I1
PC I2
PC I3
FL O PPY D ISK CONN.
1
1
JSFA N1
JU SB V 3
1 9
JUSB 3
1 9
JUSB 4
JCFA N1
DIM M 2
DIM M1
PRIM ARY IDE CONN.
SECOND ARY ID E CON N.
BAT1
1
102
102
FDD1
JC 1
JG A M E 1
JC M O S1
115
216
JPAN EL1
1
24
23
12
2
English
U8799 Fe atures
A. Har dware
CPU
Prov ides Sock et 478.
Su pports Intel® Pentium® 4 proces s or up to 3. 06 GH z.
Su pports H yper-Thr eading T echnolog y.
F ront Side Bus at 400/533 MHz.
Chipset
N orth Bridge: VIA P4X400.
Sout h Bridge: VIA VT8235.
Main Me m o ry
Support s up t o 2 DDR devices .
Support s 200/ 266/ 333/ 400 MH z D DR devic es.
Maxi mu m me mo ry s i ze o f 2GB.
Super I/O
Chip: ITE IT 8705.
Slots
Three 32-bit PCI bus master s lots.
One AGP 4X/ 8X slot. (AGP 4X only supports 1.5v AGP elect ricals)
One CNR slot.
On Board IDE
Supports four IDE di s k dri ves.
Supports PIO Mode 0~4, Ultra D MA 33/66/100/133 Bus Master Mode.
LAN
C hip: VIA VT6103.
Supports 10 Mb/s and 100 Mb/ s auto-negot iat ion
H alf / Full duplex capability.
On Bo ard AC’97 Sound Cod ec
Chip: CMI9739A/ CMI9761A (for v3.2 & above)
Compliant with AC ’97 s pec ificat ion.
AC 99 2. 2 interf ac e for CMI9739A/ AC99 2. 3 interface f or CMI9761A .
Support s 6 c hannels.
Support s stereo m icrophone. (for CMI9761A)
3
On Board Periphera ls
a. R e ar si de
2 s erial port s.
1 parallel port. (SPP/EPP/ECP m ode)
Audio ports in v ert ical posit ion.
1 LAN jack.
PS/2 mouse and PS/2 keyboard.
2 USB 2 .0 por ts. (4 USB2 .0 p o r ts for v3.2 )
1 v ert ic al audio port.
b. F ront Si d e
1 floppy port supports 2 F DDs with 360K, 720K, 1.2M, 1.44M and 2. 88Mby tes.
4 USB2.0 port s
1 front audio header.
Dimensions
Mic ro ATX Form Fac t or: 24.5 X 22.5c m (W X L)
B. BIOS & S oftware
BIOS
Award legal Bios .
APM1.2.
ACPI.
USB Function.
Software
S uppor ts W arp spe ederTM, 9t h Tou c hTM, FLASHER™, WinFl asherTM.
Offers the highest performance for Windows 98 SE, Windows 2000, W indows Me,
Windows XP, SC O UNIX etc.
Package contents
HDD Cable X 1
FDD Cable X 1
User’s Manual X 1
USB Cable X 1 (optional)
Rear I/ O Panel for Mic ro ATX C as e X 1 (optional)
Fully Setup Driver CD X1
4
Ho w to setup Jumper
The illustrat ion sho ws how jum pe rs are s e tu p. When the Jum per c ap is placed on pins, the
jumper is “close”. If no jumper cap is placed on the pins, the jumper is ”open”. The
illust rat ion sho ws a 3-pin jumper whos e pin 1and 2 are “close” when jumper c ap is placed
on thes e 2 pins .
Jumper close Jumper open Pin 1-2 close
CPU Installation
Step1: Pull the lever sideway s away from the s ock et and then raise the lever up to a
90 -degree angl e.
Step2: Look for the white dot/c ut edge. The whit e dot/cut edge should point towards the
lev er pivot. The C PU will f it only in the c orrect orient ation.
Step3: Hold the CPU down fir ml y, and then close the lever.
Step4: Put t he C PU f an on t he C PU and buck le it. Connect the CPU fan power c able t o
the JCFAN1. This completes the installation.
Step1 Step2 Step3 Step4
5
CPU Fan Header: JCFAN1
3
1
JCFAN1
Pin No. A ssi gnm e nt
1
2
3
FAN rpm Rate Sense
Ground
+12V
S ystem Fan Header: JSFAN1
31
JSFAN1
Pin No. A ssi gnm e nt
1
2
3
FAN rpm Rate Sense
Ground
+12V
D DR DIMM Mod ules : DIMM1 / DIMM2
DR AM Access Time: 2.5V Un buff ere d DDR 200/266/33 3/ 400 MHz Typ e required.
DRAM Type: 64MB/ 128MB/ 256MB/ 512MB/ 1GB DI MM Module (184 pin)
Total Memory Size wit h Unbuffere d DI MM s
DI MM S ocket
Location
DIMMB1 64MB/128MB/256MB/512MB/1GB
DIMMB2 64MB/128MB/256MB/512MB/1GB
Installing DDR Module
1 . Un lock a DIM M s lot by pres s ing the r eta in ing
clips outward. Align a DIMM on the slot in
the way that the notch on the DIMM m atches
the break on the slot.
2. Insert the DIMM firml y a nd vertica lly into the
slot until the retaining chip snap back in
place and the Dimm is properly seat ed.
DDR Mod u l e To tal Memory
Size (MB)
*1
*1
***On ly for refer en ce***
Max is
2 GB
6
0
Jumpers, Headers, Connectors & Slots
Floppy Disk Connector: FDD1
The mot herboard provides a standard f loppy disk connector that supports 360K,
720K, 1.2M, 1.44M and 2.88M floppy disk types. This connector supports the
prov ided f loppy drive ribbon cables .
Hard Disk Connectors: IDE1/ IDE2
The motherboard has a 32-bit Enhanced PCI IDE Controller that provides PIO
Mode 0~4, Bus Mast er, and Ultra DMA 33/ 66/ 100/ 133 functionality. It has t wo
HDD connec t ors IDE1 (primary) and IDE2 (secondary).
The ID E c onnectors can c onnect a master and a slav e driv e, so you can connect
up t o f our hard disk driv es. The first hard drive s hould alway s be c onnected to
IDE1.
Peripheral Component Interconnect Slots: PCI 1-3
This m ot herboard is equipped with 3 st andard PCI s lots. PCI stands for Peripheral
Component I nterconnec t, and it is a bus standard for expansion cards. This PCI
slot is des ignated as 32 bits.
Accelerate d Graphics Port Slot: AGP1
Your monitor will attach directly to that video card. This motherboard supports
video cards f or PC I s lots, but it is als o equipped with an Accelerated Graphics Port
(AGP). An AGP c ard will take advantage of AGP technology f or improv ed video
efficiency and perform ance, es pecially with 3D graphics.
Commun ication Netwo r k R ise r Slot: CNR1
The CNR specification is an open I ndust ry St andard Architecture, and it def ines a
ha rdw ar e scalable r iser card interfa ce, which su pports modem only.
Front USB Header: JUSB3/ JUSB4
2
1
JUSB3/4
Wake On LAN He ader: JWOL1
Pin Assignment Pin Assignment
1
1
3
9
5
7
9
+5V(fused)
USBP4-
USBP4+
Ground
KEY
2
4
6
8
10
+5V(fused)
USBP5-
USBP5+
Ground
NA
Pin Assignment
13
1 +5V Standby
JWOL1
2
3 Wake u p
7
Ground
Front Panel Connector: JPANEL1
SLP
JPANEL1
Pin Assignment Function Pin Assignment Function
1 +5V 2 Sleep C ont rol
3 NA 4 Ground
5 NA 6 NA NA
7 Speaker
9 HD D LED (+ ) 10 Power LED (+)
11 H DD LED (-)
13 Ground 14 Power Button
15 Reset Control
17 NA 18 KEY
19 NA 20 KEY
21 +5V 22 Ground
23 IRTX
2
123
PWR_LED
(+) (-)(+)
SPK
Connector
Hard Dr ive
Connector
(+) (-)
HLED
RST
Speaker
8 Power LED (+)
LED 12 Power LED (-)
Reset
Button 16 Ground
IrDA
24 IRRX
IRON/ OFF
IR
24
Sleep
Button
POWER
LED
Power-on
Button
IrDA
Connector
Power Conn ectors: JATXPWR1/ JATXPWR2
PIN Assignment PIN Assignment
1 +3.3V 11 +3.3V
2 +3.3V 12 -12V
3 Ground 13 Ground
4 +5V 14 PS_ON
5 Ground 15 Ground
6 +5V 16 Ground
7 Ground 17 Ground
8 PW_OK 18 -5V
9 Standby Voltage
+5V
10 +12V 20 +5V
19 +5V
10
1
JATXPWR1
20
11
8
h
3
4
JATXPWR2
2
PIN Assignment PIN Assignment
1
2
+12V
+12V
3
4
Ground
Ground
Power Source Selection for Keyboard and Mouse: JKBV1
JKBV1 Assignment
1 3
Pin 1-2 clos e
1 3
Pin 2-3 clos e
+5V
+5V Standby
Voltage
+5V for ke yboar d and mo use
PS/ 2 Mouse and PS/ 2 Key board are
powered with +5V standby v oltage
Note : In order to su pport this fu ncti on “Power-on the system via keyboa rd
and mouse, “JKBV1” jumper cap should be placed on pin 2-3.
Description
Ca se Op e n Connec tor : JC1
Pin
1
JC1
1
2
Assignment
Case Open Signal
Ground
Power Source Selection for USB: JUSBV1 /JUSBV2/ JUSBV3
JUSBV2/ JUSBV3
1 3
Pin 1-2 c los e
Assignment Description
+5 V
JU SBV2: 5V for USB located at the
JU SBLAN1 port
JU SBV3: 5V for USB located at the
JU SB3/4 ports
1 3
Pin 2-3 c los e
+5V Standby
Voltage
JUSBV2: JU SBLAN1 port powered wit
standby v olt age of 5V
JUSBV3: JUSB3/4 ports powered wit h
standby v olt age of 5V
Note: In orde r to support this functio n “P owe r-on the system via USB device ”,
“JUSBV2/JUSBV3” jumper cap shoul d be placed on pin 2-3 respectively.
9
p
Clear CMOS Jumper: JCMOS1
JCMOS1 Assignment
3
1
Pin 1-2 C lose
3
1
Pin 2-3 C lose
Norm al Operation (def ault)
Clear CMOS Data
The fo llowing procedu res a re for res etting the
BIOS
assword . It is i mportant to follow these
ins truct ions c lose ly.
※ Clear CMOS Procedures:
1. R emov e AC power line.
2. Set the jumper to “Pin 2-3 c lose”.
3. Wa it for fi ve seconds.
4. Set the jumper to “Pin 1-2 c lose”.
5. Power on AC.
6. R eset your des ired password or clear t he C MOS dat a.
CD-ROM Audio-In Heade r: JCDIN1/ JCDIN2 (optional)
4
1
JCDI N1/ 2
Pin Assignment
1
2
3
4
Left Channel In put
Ground
Ground
Right Channel In put
10
Front Panel Audio Header: JAUDIO1
2
2
1
1
Pin Assignment Pin Assig nment
1
3
5
7
9
11
13
Mic I n / C e nter
Mic Power/ Bass
Right Line Out/ Right
Speak er Out
Reserved
Left Line Out/ Left
Speak er Out
Right Line I n/ R ight Rear
Speaker
Left Line I n/ Left R ear
Speaker
14
14
13
13
JAUDIO1
2
4
6
8
10
12
14
Right Line Out/ Right
Right Line I n/ R ight Rear
Left Line I n/ Left R ear
Ground
Audio Power
Speak er Out
Key
Left Line Out/ Left
Speak er Out
Speaker
Speaker
Front Panel Audio Header: JAUDIO1 (optional)
2
121
Pin Assignment Pin Assig nment
1
3
5
7
9
11
13
15 Ground 16 Key
Mic I n / C e nter
Mic Power/ Bass
Right Line Out/ Right
Speak er Out
Reserved
Left Line Out/ Left
Speak er Out
Surrender R ight
Cent er
16
15
JAUDIO1
2
4
6
8
10
12
14
Right Line Out/ Right
Ground
Audio Power
Speak er Out
Key
Left Line Out/ Left
Speak er Out
Surrender Lef t
Subwoof
Digital Audio Connector: JSPDIF_OUT1/JSPDIF_IN1: optional
13
JSPDIF_OUT1/
(J SPDIF_IN1)
Pin Assignment
+5V
SPDIF_OUT
Ground
11
1
2
3
Game Port Header: JGAME1
X
p
15
Pin Assign m ent Pin Assignment
1
3
5
7
9
11
13
15
Joy stick B Butt on 1
Joy stick B C oordinate X
MIDI Output
Joy stick B C oordinate Y
Joy stick B Butt on 2
MIDI Input
AUDIO DJ Connector: JDJ1
1
JDJ1
B ack Panel Connectors
1
216
JGAME1
+5V
NA
PIN Assignment PIN Assignment
1
2
5
SMBDATA
ATX_PWROK
2
4
6
8
10
12
14
16
SMBCLK
Joy st ick A Coordinate
Joy st ick A Coordinate Y
+5V
Joystick A Button 1
Ground
Ground
Joystick A Button 2
+5V
3
4
INT_B
Key
JKBMS1
PS/2
Mouse
PS/2
Keyboard
(For v3.2 only)
JUSB1
USB
COM1
JCOM1
JPRNT1
Parallel
COM2
JCOM2
12
JUSBLAN1
USB
JAUDIO
Line In
eaker Out
S
MIC In
6 Ch a n n e l S pea ke r s
Speaker Out
Line In/ Rear Speaker
Mic In/ Center & Bass
13
Français
Caractéristique de U8799
A. Maté ri e l
Processeur
Socket 478.
Supporte proc es s eur Intel® Pentium® 4.
Supporte la tec hnologie Hyper-Threading.
F SB 400/ 533/ 800 MH z.
Jeu des Puces
N orth Bridge: VIA P4X400.
Sout h Bridge: VIA VT8235.
M é moire prin cipa le
Prise en charge de deux périphériques 2 DDR.
Pris e en charge des périphériques D DR 200/266/ 333/400 MHz.
Taille max imale de la mémoire :2G o.
Super E/S
Pu ce: ITE IT8705.
I nterf ace de Comptage de Broche F aible.
Offre la f onct ionnalité Super E/S héritée la plus c ouramment ut ilisée.
I nitiat iv es de Contrôle d’Env ironnem ent,
- Moniteur H/W
- Fonction "Smart G uardian" de ITE
Slots
Trois s lots de maî t rise de bus PCI 32 bits.
Un slo t CN R.
Un slot c ompatibl e AGP 4 X/ 8X.
IDE in tégré
Supporte quat re lecteurs de dis que IDE.
Support e PIO Mode 0~4 et Ult ra DMA 33/66/100/ 133 Bus Mas t er Mode.
LAN
Pu ce: V IA VT6103.
Supporte le fonctionnement en auto-négociation 10 Mb/s et 100 Mb/ s.
C apacité Half/ Full duplex.
Codec Son AC ’ 97 in tégr é (seulemen t po ur version au-dessou s de 3.1)
Puce: CMI9739A.
Conf orme aux spécific ations AC ’97.
14
Supporte 6 canaux.
Codec Son AC ’ 97 in tégr é (seulemen t po ur version au-dessus de 3. 2)
Puc e: CMI9761A.
Conf orm e aux s pécif ic at ions I ntel® A C ’97 Re v 2 .3.
Répond aux exigenc es de Microsoft® PC2001.
Support e 6 canaux.
Supporte le m ic rophone stéréo.
Ges t ion d’alimentation avancée et capacit és d’économ ie d’énergie.
Périphériq ue s intégré
a. C ô té arr ière
2 port s série.
1 port parallèle. (mode SPP/EPP/ ECP)
1 port audio en posit ion v ertic ale.
1 port LAN.
1 souris PS/2.
1 clavier PS/2.
4 ports USB2.0.
b. Côté frontal
1 port disquet t e prenant en charge 2 FDD av ec 360K, 720K, 1. 2M, 1.44M et 2.88
Mo.
4 por ts US B2 .0.
1 connecteur front a udi o.
Dimensions
F acteur de Forme Mic ro ATX: 24.5 X 22. 5cm (Larg X L)
B. BIOS & S oftware
BIOS
Award legal Bios .
APM1.2.
ACPI.
Fonction USB.
Logiciel
Supporte WarpspeederTM, 9t h To uchTM, FLASHER™, WinFlasher
Off rant la meilleure perform ance pour Windows 98 SE, Windows 2000, Windows
Me, Windows XP, UNIX series, etc.
TM
.
15
WarpSpeeder
Introduction
[ W arpSpeeder™ ], a new powerf ul control utility, f eatures three us er-f riendly functions
including Ov erclock Manager, Ov ervoltage Manager, and H ardware Monit or.
With the Over clock Manage r, users can easil y adjust the frequency the y prefer or they can
get t he best CPU perf ormanc e wit h jus t one click . The Ov ervoltage Manager, on the other
hand, helps to power up CPU core voltage and Memory voltage. The cool Hardware
Monitor smartly indic ates the t emperatures, volt age and CPU fan speed as well as the
chips et inform at ion. Also, in t he About panel, you c an get det ail des c ript ions about BI OS
model and chipsets. In addition, t he frequency status of CPU, memory, AGP and PC I
along with t he C PU s peed are synchronically shown on our m ain panel.
Moreov er, to protect users' c om puter sy s tems if the s etting is not appropriat e when testing
and results in system f ail or hang, [ WarpSpeeder™ ] technology assures the system
st ability by automat ically reboot in g the c om puter and then restart t o a speed that is either
the original sys t em speed or a s uit able one.
System Requirement
OS Support : Windows 98 SE, W indows Me, Windows 2000, Windows XP
Direc t X: DirectX 8.1 or abov e. (The W indows XP operating sys tem inc ludes D irectX 8. 1. If
you us e W indows XP, y ou do not need t o inst all D irectX 8. 1. )
16
Installation
1. Execute the s etup execution f ile, and then the following dialog will pop up.
Please clic k “Nex t ” button and follow the def ault procedure to install.
2. When you see the following dialog in setup procedure, it means setup is
comple ted . If th e “Launch the War pSpeeder Tray Utility” checkbox is che cked,
the Tray Icon utility and [WarpSpeeder™] utility will be automatically and
imm ediately launched after you click “Finish” butt on.
17
Loading...