Biostar H67MH, H67MU3 Owner's Manual
TH67MU3/H67MU3/H67MH Setup Manual
FCC Information and Copyright
This equipment has been tested and found to comply with the limits of a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment ge nerates, uses, and can radiate radio frequency
energy and, if not i nstalled and used in accordance with the instructions, may
cause harmful interference to radio communications. There is no guarantee
that interference will not occur in a particular installation.
The vendor makes no representations or warranties with respect to the
contents here and specially disclaims any implied warranties of merchantability
or fitness for any purpose. Further the vendor reserves the right to revise this
publication and to make changes to the contents here without obligation to
notify any party beforehand.
Duplication of this publication, in part or in whole, is not allowed without first
obtaining the vendor’s approval in writing.
The content of this user’s manual is subject to be changed without notice and
we will not be responsible for any mistakes found in this user’s manual. All the
brand and product names are trademarks of their respective companies.
Dichiar azione di conformit à
sintetica
Ai sensi dell’art. 2 comma 3 del D.M.
275 del 30/10/2002
Si dichiara che questo prodotto è
conforme alle normative vigenti e
soddisfa i requisiti essenziali richiesti
dalle direttive
2004/108/CE, 2006/95/CE e
1999/05/CE
quando ad esso applicabili
Short De cla ration of conf ormity
We declare this product is complying
with the laws in force and meeting all
the essential requirements as specified
by the directives
2004/108/CE, 2006/95/CE and
1999/05/CE
whenever these laws may be applied
Table of Contents
Chapter 1: Introduction ........................................ 1
1.1 Before You Start ................................................................................ 1
1.2 Package Checklist............................................................................. 1
1.3 Motherboard Features...................................................................... 2
1.4 Rear Panel Connectors ..................................................................... 3
1.5 Motherboard Layout......................................................................... 4
Chapter 2: Hardware Installation .......................... 5
2.1 Installing Central Processing Unit (CPU) ....................................... 5
2.2 FAN Headers...................................................................................... 7
2.3 Installing System Memory ................................................................ 8
2.4 Connectors and Slots....................................................................... 10
Chapter 3: Headers & Jumpers Setup .................. 13
3.1 How to Setup Jumpers .................................................................... 13
3.2 Detail Settings.................................................................................. 13
Chapter 4: RAID Functions .................................. 17
4.1 Operating System............................................................................ 17
4.2 Raid Arrays...................................................................................... 17
4.3 How RAID Works............................................................................. 17
Chapter 5: Useful Help ........................................ 21
5.1 Driver Installation Note.................................................................. 21
5.2 Software............................................................................................ 22
5.3 Extra Information............................................................................ 26
5.4 AMI BIOS Beep Code....................................................................... 27
5.5 Troubleshooting............................................................................... 28
Appendix: SPEC In Other Languages ................... 29
German.................................................................................................................. 30
French .................................................................................................................... 32
Italian..................................................................................................................... 34
Spanish ................................................................................................................... 36
Portugue se ............................................................................................................ 38
Polish...................................................................................................................... 40
Russian ................................................................................................................... 42
Arabic..................................................................................................................... 44
Japanese ................................................................................................................ 46
CHAPTER 1: INTRODUCTION
TH67MU3/H67MU3/H67MH
1.1 B
EFORE YOU START
Thank you for choosing our product. Before you start installing the
motherboard, please make sure you follow the instructions below:
Prepare a dry and stable working environment with
sufficient lighting.
Always disconnect the computer from power outlet
before operation.
Before you take the motherboard out from anti-static
bag, ground yourself properly by touching any safely
grounded appliance, or use grounded wrist strap to
remove the static charge.
Avoid touching the components on motherboard or the
rear side of the board unless necessary. Hold the board
on the edge, do not try to bend or flex the board.
Do not leave any unfastened small parts inside the
case after installation. Loose parts will cause short
circuits which may damage the equipment.
Keep the computer from dangerous area, such as heat
source, humid air and water.
The operating temperatures of the computer should be
0 to 45 degrees Celsius.
1.2 PACKAGE CHECKLIST
Serial ATA Cable X 2
Rear I/O Panel for ATX Case X 1
User’s Manual X 1
Fully Setup Driver CD X 1
USB 2.0 Cable X1 (optional)
Serial ATA Power Cable X 1 (optional)
Note: The package contents may be different due to area or your motherboard version.
1
Motherboard Manual
1.3 MOTHERBOARD FEATURES
TH67M U3 / H67 MU3 H67 MH
Socket 1155
Int e l Co re i7 / i5 / i3 / Pen tium processor
Supports Execute Disab le B it / Enhanced Inte l
SpeedSt ep® / Intel Ar chitecture-64 / Extended
Memory 64 Technology / Virtualization
Technology
ITE 8728
Prov ides the most common ly used leg acy Sup er
I/O functionality.
Low Pin Count Interface
En v ironm en t Cont r ol in it iatives ,
Hardware Monitor Controller
Fan Sp eed Controller
ITE's "S mart Guardian " funct ion
DIMM Slots x 2
Each DIMM supports 512MB / 1GB / 2GB / 4GB
DDR3
Max Memory Capacity 8GB
Dual Channel Mode DDR3 me mory mo du le
Supports DDR3 1333/1066
Register ed DIMM and ECC D IMM is not
supported
Integrated Serial ATA Controller
Data transfer rates up to 3.0 Gb/s / 6.0 Gb/s.
SATA Version 2.0 / 3.0 specification compliant
Realtek RTL8111E
10 / 100 Mb/s / 1Gb/s auto negot iation
ALC662
5.1 channels audio out
High Definition Audio
CPU
Chipset
Super I/O
Main Memory
SATA 2 & 3
LAN
Sound Codec
USB3.0
Slots
On Board
Connectors
2
Socket 1155
Int e l Co re i7 / i5 / i3 / Pen tium processor
Supports Execute Disab le B it / Enhanced Inte l
SpeedSt ep® / Intel Ar chitecture-64 / Extended
Memory 64 Technology / Virtualization
Technology
Intel H67 Intel H67
ITE 8728
Prov ides the most common ly used leg acy Sup er
I/O functionality.
Low Pin Count Interface
En v ironm en t Cont r ol in it iatives ,
Hardware Monitor Controller
Fan Sp eed Controller
ITE's "S mart Guardian " funct ion
DIMM Slots x 2
Each DIMM supports 512MB / 1GB / 2GB / 4GB
DDR3
Max Memory Capacity 8GB
Dual Channel Mode DDR3 me mory mo du le
Supports DDR3 1333/1066
Register ed DIMM and ECC D IMM is not
supported
Integrated Serial ATA Controller
Data transfer rates up to 3.0 Gb/s / 6.0 Gb/s.
SATA Version 2.0 / 3.0 specification compliant
Realtek RTL8111E
10 / 100 Mb/s / 1Gb/s auto negot iation
ALC662
5.1 channels audio out
High Definition Audio
Asmedia ASM1042
PCI Express Gen2 x16 Slot x1 PCI Express Gen2 x16 Slot x1
PCI Express Gen2 x1 Slot x1 PCI Express Gen2 x1 Slot x1
PCI Slot x2 PC I S lot x 2
Printer Port Connecto r x1 Printer Port Connecto r x1
Serial Port Connector x1 Serial Port Connector x1
SATA 3 Connector x2 SATA 3 Connector x2
SATA 2 Connector x4 SATA 2 Connector x4
Front Panel Connector x1 Front Panel Connector x1
Front Audio Connector x1 Front Audio Connector x1
S/PDIF out Connector x1 S/PDIF out Connector x1
CPU Fan Header x1 CPU Fan Header x1
TH67MU3/H67MU3/H67MH
TH67M U3 / H67 MU3 H67 MH
System Fan Header x1 System Fan Header x1
Clear CMOS Header x1 Clear C MOS H ead er x1
USB 2.0 Connector x2 USB 2.0 Connector x2
Consumer IR Connector x1 Consumer IR Connector x1
Power Connector (24pin) x1 Power Conn ector (24pin) x1
Power Connector (4pin) x1 Power Conn ector (4pin) x1
Back Panel
I/O
Board Size
OS Support
PS/2 Keybo ard / Mous e x1
HDMI Port x1
VGA Port x1
DVI-D Port x1
LAN Port x1
USB2.0 Port (by H67) x2
USB3.0 Port (by ASM1042) x2
Audio Jack x3
200 (W) x 244 (L) mm 200 (W) x 244 (L) mm
Windows XP / Vista / 7
Biostar reserves the right to add or remove
support for any OS with or without notice
PS/2 Keybo ard / Mous e x1
HDMI Port x1
VGA Port x1
DVI-D Port x1
LAN Port x1
USB2.0 Port x4
Audio Jack x3
Windows XP / Vista / 7
Biostar reserves the right to add or remove
support for any OS with or without notice
1.4 REAR PANEL CONNECTORS
PS/2
Keyboard / Mouse
US B2 .0X 2
HDMI VGADVI-D
NOTE: HDM I / DV I-D / VGA Output req uire an Inte l Core fami ly p rocessor with Intel Graphics
NOTE: Maximum resolution:
NOTE: This motherboard supports Multiple VGA output, and the configuration is as below:
Te c h n o l o g y.
HDMI: 1920 x 1200 @60Hz
DVI: 1920 x 1200 @60Hz
VGA: 2048 x 1536 @75Hz
(HDMI is not supported under DOS and B IOS setup.)
Display Devices
VGA + HDMI
VGA + DVI-D HDMI + DVI-D
Enabled O O O
LAN
USB3.0X2
(For TH67MU3 & H67MU3)
USB2.0X2
(For H67M)
Line In/
Surround
Line Out
Mic In 1/
Bass/ Center
3
Motherboard Manual
1.5 MOTHERBOARD LAYOUT
USBKB1
HDMI1
DVI1
VGA 1
RJ 45USB 1
AUDIO1
LAN
ATXPWR2
Socket 1155
CPU1
PEX16_1
PCI1
DDR3_B1
DDR3_A1
CPU_FAN1
ATXPWR 1
SATA2 SATA1
SATA5
SATA3
SATA6
SATA4
CODEC
PEX1_1
F_ AUDI O1 J_ PRIN T1 J_C OM1
Note: ■ represents the 1st pin.
4
PCI2
Super
I/O
BAT1
CIR1
JSPDIFOUT1
F_USB1 F_USB2
H67
JCMOS1
PAN EL1
BIOS
SYS_FAN1
TH67MU3/H67MU3/H67MH
CHAPTER 2: HARDWARE INSTALLATION
2.1 I
NSTALLING CENTRAL PROCESSING UNIT (CPU)
Special Notice:
Remove Pin Cap before installation, and make good preservation
for future use. When the CPU is removed, cover the Pin Cap on the
empty socket to ensure pin legs won’t be damaged.
Step 1: Pull the socket locking lever out from the socket and then raise
the lever up.
Step 2: Remove the Pin Cap.
5
Motherboard Manual
Step 3: Look for the triangular cut edge on socket, and the golden dot on
CPU should point forwards this triangular cut edge. The CPU will
fit only in the correct orientation.
Step 4: Hold the CPU down firmly, and then lower the lever to locked
position to complete the installation.
Step 5: Put the CPU Fan and heatsink assembly on the CPU and buckle it
on the retention frame. Connect the CPU FAN power cable into
the CPU_FAN1 to complete the installation.
6
TH67MU3/H67MU3/H67MH
2.2 FAN HEADERS
These fan headers support cooling-fans built in the computer. The fan
cable and connector may be different due to the fan manufacturer.
Connect the fan cable to the connector while matching the black wire to
pin#1.
CPU_FAN1: CPU Fan Header
14
Pin
Assignment
1 Ground
2 Power
3 FAN RPM rate sense
4 Smart Fan Control
SYS_FAN1: System Fan Header
Pin
Assignment
1 Ground
2 +12V
3 FAN RPM rate sense
3
1
Note:
CPU_FAN1 supports 4-pin head connector; SYS_FAN1, 3-pin head one. When
connecting with wires onto connectors, please note that the red wire is the positive and
should be co nnected to pin#2, and the black wire is Ground and should be connected to
GND.
7
Motherboard Manual
2.3 INSTALLING SYSTEM MEMORY
A. DDR3 module
DDR3_B1
DDR3_A1
1. Unlock a DIMM slot by pressing the retaining clips outward. Align a
DIMM on the slot such that the notch on the DIMM matches the
break on the Slot.
2. Insert the DIMM vertically and firmly into the slot until the retaining
chip snap back in place and the DIMM is properly seated.
8
B. Memory Capacity
TH67MU3/H67MU3/H67MH
DIMM Socket
Location
DDR3_A1 512MB/1GB/2GB/4GB
DDR3_B1 512MB/1GB/2GB/4GB
DDR3 Module
C. Dual Channel Memory Installation
Please refer to the following requirements to activate Dual Channel function:
Install memory module of the same density in pairs, shown in the table.
Dual Channel Status
Disabled O X
Disabled X O
Enabled O O
(O means memory installed; X, not installed.)
The DRAM bus width of the memory module must be the same(x8 or
x16)
DDR3_A1
Total Mem o ry
Size
Max is 8GB.
DDR3_B1
9
Motherboard Manual
2.4 CONNECTORS AND SLOTS
SATA1/SATA2: Serial ATA Connectors
The motherboard has a PCI to SATA Controller with 4channels SATA interface, it
satisfies the SATA 3.0 spec and with transfer rate of 6Gb/s.
SATA3~SATA6: Serial ATA Connectors
The motherboard has a PCI to SATA Controller with 4channels SATA interface, it
satisfies the SATA 2.0 spec and with transfer rate of 3Gb/s.
SATA1
SATA2
7
4
1
SATA3 SATA5
SATA4 SATA6
7
4
1
Pin Assignment
1 Ground
2 TX+
3 TX4 Ground
5 RX6 RX+
7 Ground
Pin Assignment
1 Ground
2 TX+
3 TX4 Ground
5 RX6 RX+
7 Ground
10
TH67MU3/H67MU3/H67MH
ATXP W R1: AT X P ower Source Connector
This connector is for 24-pin power connector on the ATX power supply.
12
1
Pin Assignment Pin Assignment
13 +3.3V 1 +3.3V
14 -12V 2 +3.3V
15 Ground 3 Ground
16 PS_ON 4 +5V
17 Ground 5 Ground
18 Ground 6 +5V
19 Ground 7 Ground
20 NC 8 PW_OK
21 +5V 9 Standby Voltage+5V
22 +5V 10 +12V
23 +5V 11 +12V
24 Ground 12 +3.3V
ATXP W R2: AT X P ower Source Connector
This connector provides +12V to CPU power circuit.
34
24
13
Pin
1 +12V
2 +12V
3 Ground
12
4 Ground
Assignment
Note:
Before you power on the system, please make sure that both ATXPWR1 and ATXPWR2
connectors have been plugged-in.
11
Motherboard Manual
PCI1/PCI2: Peripheral Component Interconnect Slots
This motherboard is equipped with 2 standard PCI slots. PCI stands for
Peripheral Component Interconnect, and it is a bus standard for expansion
cards. This PCI slot is designated as 32 bits.
PEX16_1: PCI-Express Gen2 x16 Slot
- PCI-Express 2.0 compliant.
- Maximum theoretical realized bandwidth of 8GB/s simultaneously per
direction, for an aggregate of 16GB/s totally.
- PCI-Express Gen2 supports a raw bit-rate of 5.0Gb/s on the data pins.
- 2X bandwidth over the PCI-Express 1.1 architecture.
PCI1
PCI2
PEX1_1: PCI-Express Gen2 x1 Slot
- PCI-Express 1.1 compliant.
- Data transfer bandwidth up to 250MB/s per direction; 500MB/s in total.
- PCI-Express supports a raw bit-rate of 2.5Gb/s on the data pins.
12
PEX16_1
PEX1_1
TH67MU3/H67MU3/H67MH
CHAPTER 3: HEADERS & JUMPERS SETUP
3.1 H
OW TO SETUP JUMPERS
The illustration shows how to set up jumpers. When the jumper cap is
placed on pins, the jumper is “close”, if not, that means the jumper is
“open”.
Pin opened Pin closed Pin1-2 closed
3.2 DETAIL SETTINGS
PANEL1: Front Panel Header
This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, and
speaker connection. It allows user to connect the PC case’s front panel switch
functions.
POW _LED
9
1
SPK
++
HLED
+
On/Off
-
-
RST
16
8
Pin Assignment Function Pin Assignment Function
1 +5V 9 N/A
2 N/A 10 N/A
3 N/ A 1 1 N/A N/A
4 Speaker
5 HDD LED (+) 13 Power LED (+)
6 HDD LED (-)
7 Ground 15 Power button
8 Reset control
Speaker
Connector
Hard drive
LED
Reset button
12 Power LED (+)
14 Power LED (-)
16 Ground
N/A
Power LED
Power-on button
13
Loading...