Biostar H61MU3B Owner's Manual

H61MU3B Setup Manual

FCC Information and Copyright

This equipment has been tested and found to comply with the limits of a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment ge nerates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. There is no guarantee
that interference will not occur in a particular installation.

The vendor makes no representations or warranties with respect to the
contents here and specially disclaims any implied warranties of merchantability
or fitness for any purpose. Further the vendor reserves the right to revise this
publication and to make changes to the contents here without obligation to
notify any party beforehand.

Duplication of this publication, in part or in whole, is not allowed without first
obtaining the vendor’s approval in writing.

The content of this user’s manual is subject to be changed without notice and
we will not be responsible for any mistakes found in this user’s manual. All the
brand and product names are trademarks of their respective companies.

Dichiar azione di conformit à
sintetica

Ai sensi dell’art. 2 comma 3 del D.M.
275 del 30/10/2002

Si dichiara che questo prodotto è
conforme alle normative vigenti e
soddisfa i requisiti essenziali richiesti
dalle direttive

2004/108/CE, 2006/95/CE e
1999/05/CE

quando ad esso applicabili

Short De cla ration of conf ormity

We declare this product is complying
with the laws in force and meeting all
the essential requirements as specified
by the directives

2004/108/CE, 2006/95/CE and
1999/05/CE

whenever these laws may be applied

Table of Contents

Chapter 1: Introduction ........................................ 1

1.1 Before You Start......................................................................................... 1

1.2 Package Checklist..................................................................................... 1

1.3 Motherboard Features.............................................................................. 2

1.4 Rear Panel Connectors.............................................................................. 3

1.5 Motherboard Layout................................................................................. 4

Chapter 2: Hardware Installation .......................... 5

2.1 Installing Central Processing Unit (CPU) ............................................... 5

2.2 FAN Headers.............................................................................................. 7

2.3 Installing System Memory ........................................................................ 8

2.4 Connectors and Slots................................................................................ 10

Chapter 3: Headers & Jumpers Setup .................. 13

3.1 How to Setup Jumpers............................................................................. 13

3.2 Detail Settings .......................................................................................... 13

Chapter 4: Useful Help ........................................ 17

4.1 Driver Installation Note.......................................................................... 17

4.2 Software .................................................................................................... 18

4.3 Extra Information.................................................................................... 22

4.4 AMI BIOS Beep Code............................................................................... 23

4.5 Troubleshooting....................................................................................... 24

Appendix: SPEC In Other Languages ................... 26

German.................................................................................................................. 26

French .................................................................................................................... 28

Italian..................................................................................................................... 30

Spanish ................................................................................................................... 32

Portugue se ............................................................................................................ 34

Polish...................................................................................................................... 36

Russian ................................................................................................................... 38

Arabic..................................................................................................................... 40

Japanese ................................................................................................................ 42

CHAPTER 1: INTRODUCTION

H61MU3B

1.1 B

EFORE YOU START

Thank you for choosing our product. Before you start installing the
motherboard, please make sure you follow the instructions below:

 Prepare a dry and stable working environment with

sufficient lighting.

 Always disconnect the computer from power outlet

before operation.

 Before you take the motherboard out from anti-static

bag, ground yourself properly by touching any safely
grounded appliance, or use grounded wrist strap to
remove the static charge.

 Avoid touching the components on motherboard or the

rear side of the board unless necessary. Hold the board
on the edge, do not try to bend or flex the board.

 Do not leave any unfastened small parts inside the

case after installation. Loose parts will cause short
circuits which may damage the equipment.

 Keep the computer from dangerous area, such as heat

source, humid air and water.

 The operating temperatures of the computer should be

0 to 45 degrees Celsius.

1.2 PACKAGE CHECKLIST

Serial ATA Cable x2
Rear I/O Panel for ATX Case x1
User’s Manual x1
Fully Setup Driver DVD x1

Note: The package contents may be different due to area or your motherboard version.

1

Motherboard Manual

1.3 MOTHERBOARD FEATURES

SPEC

CPU

Chipset

Super I/O

Main

Memory

SATA 2

LAN

Socket 1155

Int e l Core i7 / i5 / i3 / Pent ium / Celeron

processor

Intel H61

IT8728

Prov ides the most common ly used legacy

Super I/O functionality

Low Pin Count Interface

DDR3 DIMM Slots x 2

Max Memory Capacity 16GB

Each DIMM supports 512MB/

1GB/2GB/4GB/8GB DDR3

Integrated Serial ATA Controller

RTL8111F

Supports Execute Disab le B it / Enhanced Inte l

SpeedSt ep® / Intel Ar ch itecture- 64 / Extended

Memory 64 Technology / V irtualization Technology /

Hyp er T hread ing

En v ironm en t Cont rol init iatives

Hardware Monitor Controller

Fan Sp eed Controller

ITE's "S mart Guard ian" function

Dual Channel Mode DDR3 me mory mo du le

Supports DDR3 1066 / 1333 / 1600 (depending on

CPU)

Register ed DIMM and ECC D IMM is not supported

Data transfer rates up to 3.0 Gb/s

SATA Version 2 .0 s p e c if icat ion co mplian t

10 / 100 / 1000 Mb/s auto negotiation

Half / Full duplex capability

Sound

Codec

Slots

On Board

Connectors

2

ALC662

PCI-E Gen3x16 slot x1

(depe nd ing on CPU)

PCI-E Gen2 x1 slot x1 Supports PCI-E Gen2 x1 expansion card

SATA2 Connecto r x4 Each connector suppo rts 1 SATA2 device

Front Panel Connector x1 Supports front panel facilities

Front Audio Connector x1 Supports front panel audio function

CPU Fan Header x1 CPU Fan power supply (with Smart Fan function)

System Fan Header x1 System Fan Power supply

Clear CMOS Head er x1 Restore CMOS dat a to factory def au lt

5.1 channels audio out

High Definition Audio

Supports PCI-E Gen2/3 x16 expansion card

H61MU3B

SPEC

USB2.0 Connector x2 Each co nnector supports 2 front panel USB2.0 po rts

Printer Port Connector x1 Each connector supports 1 Printer port

Serial Port Connector x1 Connects to RS-232 Port

Power Connector (24pin) x1 Connects to Power supp ly

Power Connector (4pin) x1 Connects to Power supply

PS/2 Keybo ard x1

PS/2 Mous e x1

VGA Port x1

Rear Panel

I/O

Board Size

OS Support

DVI-D Port x1

LAN port x1

USB3.0 Port x2

USB2.0 Port x2

Audio Jack x3

180 (W) x 226 (L) mm uATX

Windows XP / Vista / 7

1.4 REAR PANEL CONNECTORS

PS/2
Mous e

PS/2
Keyboard

VGADVI-D

Connects to PS/2 Keyboard

Connects to PS/2 Mouse

Connect to D-SUB monitor

Connect to DVI monitor

Connect to RJ- 45 ethe rnet cab le

Connect to USB3.0 devices

Connect to USB2.0 devices

Provide Audio-In/Out and Mic. connection

Biostar reserves the r ight to add or remove support

for any OS with or without notice

USB3.0 x2

LAN

USB2.0 x2

Line In/
Surround

Line Out

Mic In 1/
Bass/ Center

NOTE: DVI-D / VGA Output require an Intel Core family processor with Intel Graphics Technology.

NOTE: Since the audio chip supports High Definition Audio Specification, the function of each

audio jack can be defi ned by software. The input / output function of each audio jack listed
above represents the default setting. However, when connecting external microphone to
the audio port, please use the Line In (Blue) and Mic In (Pink) audio jack.

NOTE: Maximum resolution:

DVI: 1920 x 1200 @60Hz
VGA: 2048 x 1536 @75Hz

3

Motherboard Manual

1.5 MOTHERBOARD LAYOUT

4

Note: represents the 1■

st

pin.

CHAPTER 2: HARDWARE INSTALLATION

H61MU3B

2.1 I

NSTALLING CENTRAL PROCESSING UNIT (CPU)

Notice:

1. Remove Pin Cap before installation, and make good preservation for future use.
When the CPU is removed, cover the Pin Cap on the empty socket to ensure pin
legs won’t be damaged.

2. The motherboard might equip with two different types of pin cap. Please refer
below instruction to remove the pin cap.

Step 1: Pull the socket locking lever out from the socket then raise the

lever and load plate to the fully open position.

Step 2: Remove the Pin Cap.

5

Motherboard Manual

Step 3: Hold processor with your thumb and index fingers, oriented as

shown. Align the notches with the socket. Lower the processor
straight down without tilting or sliding the processor in the socket.

Step 4: Close the load plate. Pressing down on the load plate, close and

engage the socket lever.

Step 5: Put the CPU Fan and heatsink assembly on the CPU and buckle it

on the retention frame. Connect the CPU FAN power cable into
the CPU_FAN1 to complete the installation.

6

2.2 FAN HEADERS

These fan headers support cooling-fans built in the computer. The fan
cable and connector may be different according to the fan manufacturer.
Connect the fan cable to the connector while matching the black wire to
pin#1.

CPU_FAN1: CPU Fan Header

Pin Assignment

1 Ground
2 +12V
3

FAN RPM rate sense

4 Smart Fan Control

SYS_FAN1: System Fan Header

Assignment

Pin

1 Ground
2 +12V
3 FAN RPM rate sense

Note:

The SYS_FAN1 support 3-pin head connectors; the CPU_FAN1 supports 4-pin head
connector. When connecting with wires onto connectors, please note that the red wire is
the positive and should be connected to pin#2, and the black wire is Ground and should
be connected to GND.

H61MU3B

7

Motherboard Manual

2.3 INSTALLING SYSTEM MEMORY

A. Memory Modules

1. Unlock a DIMM slot by pressing the retaining clips outward. Align a
DIMM on the slot such that the notch on the DIMM matches the
break on the Slot.

8

H61MU3B

2. Insert the DIMM vertically and firmly into the slot until the retaining
chip snap back in place and the DIMM is properly seated.

Note:

If the DIMM does not go in smoothly, do not force it. Pull it all the way out
and try again.

B. Memory Capacity

DIMM Socket

Location

DDR3_A1 512MB/1GB/2GB/4GB/8GB

DDR3_B1 512MB/1GB/2GB/4GB/8GB

DDR3 Module

C. Dual Channel Memory Installation

Please refer to the following requirements to activate Dual Channel function:
Install memory module of the same density in pairs, shown in the table.

Dual Channel Status

Disabled O X

Disabled X O

Enabled O O

(O means memory installed; X, not installed.)

The DRAM bus width of the memory module must be the same(x8 or
x16)

DDR3_A1

Total Mem o ry

Size

Max is 16GB.

DDR3_B1

9

Motherboard Manual

2.4 CONNECTORS AND SLOTS

SATA1~SATA4: Serial ATA Connectors

The motherboard has a PCI to SATA Controller with 4 channels SATA2 interface,
it satisfies the SATA 2.0 spec and with transfer rate of 3.0Gb/s.

ATXP W R2: AT X P ower Source Connector

This connector provides +12V to CPU power circuit.

Assignment

Pin

1 Ground
2 TX+
3 TX­4 Ground
5 RX­6 RX+
7 Ground

Pin Assignment

1 +12V
2 +12V
3 Ground
4 Ground

10

ATXP W R1: AT X P ower Source Connector

This connector allows user to connect 24-pin power connector on the ATX
power supply.

H61MU3B

Pin Assignment Pin Assignment

13 +3.3V 1 +3.3V
14 -12V 2 +3.3V
15 Ground 3 Ground
16 PS_ON 4 +5V
17 Ground 5 Ground
18 Ground 6 +5V
19 Ground 7 Ground
20 NC 8 PW_OK
21 +5V 9 Standby Voltage+5V
22 +5V 10 +12V
23 +5V 11 +12V
24 Ground 12 +3.3V

11

Motherboard Manual

PEX16_1: PCI-Express Gen3 x16 Slot

- PCI-Express 3.0 compliant.

- Maximum theoretical realized bandwidth of 16GB/s simultaneously per

direction, for an aggregate of 32GB/s totally.

- PCI-E 3.0 is supported by Core i7-3xxx / i5-3xxx CPU.

PEX1_1: PCI-Express Gen2 x1 Slot

- PCI-Express 2.0 compliant.

- Data transfer bandwidth up to 500MB/s per direction; 1GB/s in total.

- PCI-Express supports a raw bit-rate of 5.0Gb/s on the data pins.

12

CHAPTER 3: HEADERS & JUMPERS SETUP

H61MU3B

3.1 H

OW TO SETUP JUMPERS

The illustration shows how to set up jumpers. When the jumper cap is
placed on pins, the jumper is “close”, if not, that means the jumper is
“open”.

Pin opened Pin closed Pin1-2 closed

3.2 DETAIL SETTINGS

PANEL1: Front Panel Header

This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, and
speaker connection. It allows user to connect the PC case’s front panel switch
functions.

Pin Assignment Function Pin Assignment Function

1 +5V 9 N/A
2 N/A 10 N/A
3 N/ A 1 1 N/ A N/A
4 Speaker
5 HDD LED (+) 13 Power LED (+)
6 HDD LED (-)
7 Ground 15 Power button
8 Reset control

Speaker
Connector

Hard drive
LED

Reset button

12 Power LED (+)

14 Power LED (-)

16 Ground

N/A

Power LED

Power-on button

13

Motherboard Manual

F_USB1/F_USB2: Headers for USB 2.0 Ports at Front Panel

These headers allow user to connect additional USB cable on the PC front panel,
and also can be connected with internal USB devices, like USB card reader.

F_AUDIO1: Front Panel Audio Header

This header allows user to connect the front audio output cable with the PC front
panel..

Assignment

Pin

1 +5V (fused)
2 +5V (fused)
3 USB­4 USB­5 USB+
6 USB+
7 Ground
8 Ground
9 Key

10 NC

Pin Assignment

1 Mic Left in
2 Ground
3 Mic Right in
4 GPIO
5 Right line in
6 Jack Sense
7 Front Sense
8 Key
9 Left line in

10 Jack Sense

14

H61MU3B

JCMOS1: Clear CMOS Header

Placing the jumper on pin2-3 allows user to restore the BIOS safe setting and
the CMOS data. Please carefully follow the procedures to avoid damaging the
motherboard.

13

Pin 1-2 Close:

Normal Operation (default).

Pin 2-3 Close:

Clear CMOS data.

13

※ Clear CMOS Procedures:

1. Remove AC power line.

2. Set the jumper to “Pin 2-3 close” .

3. Wait for five seconds.

4. Set the jumper to “Pin 1-2 close” .

5. Power on the AC.

6. Load Optimal Defaults and save settings in CMOS.

J_COM1: Serial Port Connector

The motherboard has a Serial Port Connector for connecting RS-232 Port.

Pin

Assignment

1 Carrier detect
2 Received data
3 Transmitted data
4 Data terminal
5 Signal ground
6 Data set ready
7 Request to send
8 Clear to send
9 Ring indicator

10 NC

15

Motherboard Manual

J_PRINT1: Printer Port Connector

This header allows you to connector printer on the PC.

Pin Assignment Pin Assignment

1 -Strobe 14 Ground

2 -ALF 15 Data 6
3 Data 0 16 Ground

4 -Error 17 Data 7
5 Data 1 18 Ground
6 -Init 19 -ACK

7 Data 2 20 Ground
8 -Scltin 21 Busy

9 Data 3 22 Ground
10 Ground 23 PE
11 Data 4 24 Ground

12 Ground 25 SCLT
13 Data 5 26 Key

16

CHAPTER 4: USEFUL HELP

H61MU3B

4.1 D

RIVER INSTALLATION NOTE

After you installed your operating system, please insert the Fully Setup
Driver DVD into your optical drive and install the driver for better system
performance.

You will see the following window after you insert the DVD

The setup guide will auto detect your motherboard and operating system.

Note:

If this window didn’t show up after you insert the Driver DVD, please use file browser to
locate and execute the file SETUP.EXE under your optical drive.

A. Driver Installation

To install the driver, please click on the Driver icon. The setup guide will
list the compatible driver for your motherboard and operating system.
Click on each device driver to launch the installation program.

B. Software Installation

To install the software, please click on the Software icon. The setup guide
will list the software available for your system, click on each software title
to launch the installation program.

C. Manual

Aside from the paperback manual, we also provide manual in the Driver
DVD. Click on the Manual icon to browse for available manual.

Note:

You will need Acrobat Reader to open the manual file. Please download the latest version
of Acrobat Reader so ftware from
http://www.adobe.com/products/acrobat/readstep2.html

17

Motherboard Manual

e

4.2 SOFTWARE

Installing Software

1. Insert the Setup DVD to the optical drive. The drivers installation
program would appear if the Autorun function has been enabled.

2. Select Software Installation, and then click on the respective software
title.

3. Follow the on-screen instructions to complete the installation.

Launching Software

After the installation process, you will see the software icon “eHOT Line” /
“BIOS Update” appears on the desktop. Double-click the icon to launch the
utility.

eHot-Line (Optional)

eHot-Line is a convenient utility that helps you to contact with our
Tech-Support system. This utility will collect the system information which is
useful for analyzing the problem you may have encountered, and then send
these information to our tech-support department to help you fix the problem.

Before you use this uti lity, please set Outlook Express as your default e- mail c lient app licatio n progra m.

re pr es ent s im porta nt

*

information that you
must provide. Without
this inf ormation, you may
not be able to send out
the mail.

This block will show
the information which
would be collected in
the mail.

Describe condition

*

of your system.

Select your area or

*

the area cl os e to you.

Provide the e-mail
address that you would
like to s end the copy to.

Pr ovid e the na me of

*

the memor y module
manufacturer.

Provide the name of
th e powe r su ppl y
manufacturer and the
model no.

Se nd th e mai l out .

Sav e thes e in forma tion to a .txt fil

Exit this dialog.

18

H61MU3B

After filling up this information, click “Send”
to send the mail out. A warning dialog would
appear asking for your confirmation; click

“Send” to confirm or “Do Not Send” to cancel.

If you want to save this information to a .txt file, click “Save As…” and then you
will see a saving dialog appears asking you to enter file name.

Enter the file name and then click
“Save”. Your system information

will be saved to a .txt file.

Open the saved .txt file, you will see
your system information including
motherboard/BIOS/CPU/video/
device/OS information. This
information is also concluded in the
sent mail.

We will not share customer’s data with any other third parties,
so please feel free to provide your system information while using
eHot-Line service.

If you are not using Outlook Express as your default e-mail client
application, you may need to save the system information to a .txt file
and send the file to our tech support with other e-mail application.
Go to the following web

http://www.biostar.com.tw/app/en-us/about/contact.php for getting

our contact information.

19

Motherboard Manual

n

BIOS Update

BIOS Update is a convenient utility which allows you to update your
motherboard BIOS under Windows system.

Sh ow cur rent BIO S inf ormatio

Update BIOS

from the Internet

with a BIOS fil e

Update BIOS

Save current BIOS

to a .bin file

<Backup BIOS>

Once click on this button, the saving

dialog will show. Choose the

position to save file a nd enter file

name. (We recommend that the file

name should be English/number

and no longer than 7 characters.)

Then click Save.

20

H61MU3B

<Update BIOS>

Before doing this, please download the proper BIOS file from the website.

Then click Update BIOS button, a
dialog will show for asking you backup
current BIOS. Click Yes for BIOS
backup and refer to the Backup BIOS
procedure; or click No to skip this
procedure.

After the BIOS Backup procedure, the
open dialog will show for requesting the
BIOS file which is going to be updated.
Please choose the proper BIOS file for
updating, then click on Open.

The utility will update BIOS with the
proper BIOS file, and this process may
take minutes. Please do not open any
other applications during this process.

After the BIOS Update process, click on
OK to restart the system.

While the system boots up and the full screen logo shows, press <Delete>
key to enter BIOS setup.

In the BIOS setup, use the Load Optimized Defaults function and then Save and
Exit Setup to exit BIOS setup. BIOS Update is completed.

All the information and content above about the software are subject to be changed
without notice. For better performance, the software is being co ntinuously updated.
The information and pictures described above are for your reference only. The actual
information and settings on board may be slightly different from this manual.

21

Motherboard Manual

4.3 EXTRA INFORMATION

CPU Overheated

If the system shuts down automatically after system is powered on for
seconds, the phenomenon means the CPU protection function has
been activated.

When the CPU is over heated, the motherboard will shutdow n
automatically to avoid a damage of the CPU, and the system may not
power on again.

In this case, please double check:

1. The CPU cooler surface is placed evenly with the CPU surface.

2. CPU fan is rotated normally.

3. CPU fan speed is fulfilling with the CPU speed.

After confirmed, please follow steps below to relief the CPU protection
function.

1. Remove the power cord from power supply for seconds.

2. Wait for seconds.

3. Plug in the power cord and boot up the system.

Or you can:

1. Clear the CMOS data.
(See “Close CMOS Header: JCMOS1” section)

2. Wait for seconds.

3. Power on the system again.

22

4.4 AMI BIOS BEEP CODE

Boot Block Beep Codes

Number of Beeps Description

1 No media present. (Insert diskette in floppy drive A:)

2

3 Insert next diskette if multiple diskettes are used for recovery
4 Flash Programming successful
5 File read error

7 No Flash EPROM detected
10 Flash Erase error
11 Flash Program error
12 “AMIBOOT.ROM” file size error

13

POST BIOS Beep Codes

Number of Beeps Description

1 Memory refresh timer error

3 Base memory read/write test error

6 Keyboard controller BAT command failed

7 General exception error (processor exception interrupt error)

8 Display memory error (system video adapter)

“AMIBOOT.ROM” file not found in root directory of diskette in
A:

BIOS ROM image mismatch (file layout does not match
image present in flash device)

H61MU3B

Troubleshooting POST BIOS Beep Codes

Number of Beeps Troubleshooting Action

1, 3 Reseat the memory, or replace with known good modules.

Fatal error indicating a serious problem with the system.
Consult your system manufacturer. Before declaring the
motherboard beyond all hope, eliminate the possibility of
interference by a malfunctioning add-in card. Remove all
expansion cards except the video adapter.

6, 7

8

z If beep codes are generated when all other expansion

cards are absent, consult your system manufacturer’s
technical support.

z If beep codes are not generated when all other expansion

cards are absent, one of the add-in cards is causing the
malfunction. Insert the cards back into the system one at a
time until the problem happens again. This will reveal the
malfunctioning card.

If the system video adapter is an add-in card, replace or
reseat the
video adapter. If the video adapter is an integrated part of the
system board, the board may be faulty.

23

Motherboard Manual

4.5 TROUBLESHOOTING

Probable Solution

1. There is no power in the system.
Power LED does not shine; the
fan of the power supply does not
work

2. Indicator light on keyboard does
not shine.

System is inoperative. Keyboard lights
are on, power indicator lights are lit,
and hard drives are running.

System does not boot from a hard disk
drive, but can be booted from optical
drive.

System only boots from an optical
drive. Hard disks can be read,
applications can be used, but system
fails to boot from a hard disk.

Screen message shows “Invalid
Configuration” or “CMOS Failure.”

System cannot boot after user installs a
second hard drive.

1. Make sure power cable is
securely plugged in.

2. Replace cable.

3. Contact technical support.

Using even pressure on both ends of
the DIMM, press down firmly until the
module snaps into place.

1. Check cable running from disk to
disk controller board. Make sure
both ends are securely plugged
in; check the drive type in the
standard CMOS setup.

2. Backing up the hard drive is
extremely important. All hard
disks are capable of breaking
down at any time.

1. Back up data and applications
files.

2. Reformat the hard drive.
Re-install applications and data
using backup disks.

Review system’s equipment. Make sure
correct information is in setup.

1. Set master/slave jumpers
correctly.

2. Run SETUP program and select
correct drive types. Call the drive
manufacturers for compatibility
with other drives.

24

H61MU3B

This page is intentionally left blank.

25

Motherboard Manual

APPENDIX: SPEC IN OTHER LANGUAGES

G

ERMAN

Sp ezif ika tio nen

CPU

Chipsatz

Super E/A

Arbeitsspeich

er

SATA 2

LAN

HD

Audio-Unters

tützung

Socket 1155

Int e l Core i7 / i5 / i3 / Pent ium / Celeron

Prozessoren

Intel H61

IT8728

Biet et die h äufig ver wendeten a lten Sup er

E/A-Funktionen.

Low Pin Count-Schnittstelle

DDR3 DIMM-Steckplätze x 2

Max. 16GB Arbeitsspeicher

Jeder DIMM unterstützt 512MB/

1GB/2GB/4GB/8GB DDR3.

Integrierter Serial ATA-Controller

RTL8111F

ALC662

Unterstützt Execute Disable Bit / Enhanced Intel

SpeedSt ep® / Intel Ar ch itecture- 64 / Extended

Memory 64 Technology / V irtualization Technology /

Hyp er T hread ing

Umgebungskontrolle,

Hardware-Überwachung

Lüfterdrehzahl-Controller/-Überwachung

"Smart Guardian"-Funktion von ITE

Dual-Kanal DDR3 Speichermodul

Unterstützt DDR3 1066 / 1333 / 1600

registrierte DIMMs. ECC DIMMs werden nicht

unterstützt.

Datentransferrate b is zu 3.0Gb /s

Konform mit der SATA-Spezifikation Version 2.0

10 / 100 / 1000 Mb/s Auto-Negotiation

Halb-/ Vollduplex-Funktion

Unterstützt High-Definition Audio

5.1-Kanal-Audioausgabe

Steckplätze

Onboard-Ans

chluss

26

PCI-E Gen3 x 16 Steckplatz x1 (je nach CPU)

PCI-E Gen2 x1-Steckplatz x1

SATA2-Anschluss x4 Jeder Anschluss unterstützt 1 SATA2-Laufwerk

Fronttafelanschluss x1 Unterstützt die Fronttafelfunktionen

Front-Audioanschluss x1 Unterstützt die Fronttafel-Audioanschlussfunktion

CPU-Lüfterstromversorgungsanschluss (mit Smart

CPU-Lüfter-Sockel x1

Fan -F un ktio n)

H61MU3B

Sp ezif ika tio nen

System-Lüfter-Sockel x1 System-Lüfter-Stromversorgungsanschluss

"CMOS löschen "-So cke l x1

USB2.0-Anschluss x2 Jeder Anschluss unterstützt 2

Front taf el- USB 2.0-Ans chlü ss e

Druckeranschluss Anschluss x1 Jeder Anschluss unterstützt 1 Druckeranschluss

Serieller Anschluss x1

Stromanschluss (24-polig) x1

St r oman s ch luss (4-polig ) x1

PS/2-Tastatur x1

Rückseiten-E

/A

Platinengröße

OS-Unterstüt

zung

PS/2- Maus x 1

VGA-Anschluss x1

DVI-D-Anschluss x1

LAN-Anschluss x1

USB3.0-Anschluss x2

USB2.0-Anschluss x2

Audioanschluss x3

180 mm (B) X 226 mm (L)

Windows XP / Vista / 7

Biostar behält sich das Recht vor, ohne Ankündigung

die Unterstützung für ein Betriebssystem

hinzuzufügen oder zu entfernen.

27

Motherboard Manual

FRENCH

SPEC

UC

Chipset

Super E/S

Mémoire

principale

SATA 2

LAN

Prise en

charg e

aud io HD

Socket 1155

Pro c ess eu rs Intel Co r e i7 / i5 / i3 / Pent iu m /

Celeron

Intel H61

IT8728

Fournit la fonctionnalité de Super E/S

patrimoniales la plus utilisée.

Int e rface à f aib le co mpt e de b roches

Fentes DDR3 DIMM x 2

Capacité mé mo ire max ima le de 16 Go

Chaque DIMM prend en charge des DDR3 de

512Mo/1Go/2Go/4Go/8Go

Contrô leur Serial ATA int é gr é

RTL8111F

ALC662

Prend en charge les techno log ies d'exécution d e bit

de désactivation / Intel SpeedStep® optimisée/

d'architecture Intel 64 / de mémo ire ét endue 64 / de

virtualisation / Hyper Thread ing

Initiatives de contrôle environnementales,

Mon iteur d e mat ér iel

Contrôleur /moniteur de vitesse de ventilateur

Fonction "Gardien intelligent" de l'ITE

Modu le d e mé mo ire DDR3 à mod e à do ub le vo ie

Prend en charge la DDR3 1066 / 1333 / 1600

Les DIMM à registres et DIMM avec code correcteurs

d'erreurs ne sont pas prises en charge

Taux de transfert jusqu'à 3.0Go/s.

Co nfor me à l a s p éc ificat ion SATA Vers ion 2.0

10 / 100 / 1000 Mb/s négociation automatique

Half / Full duplex capability

Prise en ch arg e de l' audio haute déf in it ion

Sortie audio à 5 .1 vo ies

Fentes

Connecteur

embarqu é

28

Fente PCI-E Gen3 x 16 x1 (en fonction du CPU)

Fente PCI-E Gen2 x1 x1

Chaque connecteur pr end en ch arg e 1 pér iphér iqu e

Connecteur SATA2 x4

SATA2

Connecteur du panneau avant x1 Prend en charge les équipements du panneau avant

Connect eur Audio du p anneau avant x1 Prend en ch arge la fonct ion aud io du panneau avant

Alimentation électrique du ventilateur UC (avec

Embase de ventilateur UC x1

fonction de ventilateur intelligent)

H61MU3B

SPEC

Embase de ventilateur système x1 Alimentation électrique du ventilateur système

Embase d'effacement CMOS x1

E/S du

panneau

arrière

Dimensions

de la carte

Connecteur USB2.0 x2

Connecteur de Port d'imprimante x1

Port série x1

Connecteur d'aliment at ion x1

(24 broches)

Connecteur d'aliment at ion x1

(4 broch es )

Clavier PS/2 x1

Souris PS/2 x1

Port VGA x1

Port DVI-D x1

Port LAN x1

Port USB3.0 x2

Port USB2.0 x2

Fiche aud io x3

180 mm (l) X 226 mm (H)

Chaque connecteur prend en charge 2 ports USB2.0

de panneau avant

Chaque connect or prend en ch arg e 1 Port

d'imprimante

Support SE

Windows XP / Vista / 7

Biostar se réserve le droit d'ajouter ou de supprimer

le support de SE avec ou sans pr éavis

29

Motherboard Manual

ITALIAN

SPECIFICA

CPU

Chipset

Super I/O

Memoria
principale

SATA 2

LAN

Socket 1155

Pro ces s o re Intel Core i7 / i5 / i3 /

Pentium / Celeron

Intel H61

IT8728

Fo rnis ce le f unz ionalit à lega cy S uper I/O

usate più comunemente.

Interfaccia LPC (Low Pin Count)

Alloggi DIMM DDR3 x 2

Capacità mass ima della memoria 16GB

Ciascun DIMM supporta DDR3

512MB/1GB/2GB/4GB/8GB

Co ntroller Ser ia l ATA in t eg rato

RTL8111F

Supporto di Ex ecut e Disable Bit / Enhanced

Intel SpeedStep® / Architettura Intel 64 /

Tecnologia Extended Memory 64 / Tecnologia

Virtualization / Hyper Threading

Funzioni di controllo dell’ambiente:

Monitoraggio hardware

Co ntroller / Monit o raggio velocit à ventol ina

Funzione "Smart Guardian" di ITE

Modulo di memoria DDR3 a canale doppio

Supporto di DDR3 1066 / 1333 / 1600

DIMM r egistrati e DIMM ECC non sono

supportati

Velocità di trasferimento dei dati fino a

3.0Gb/s.

Co mp at ib ile s p ec if iche S ATA Vers ion e 2.0

Negoziazione automatica 10 / 100 / 1000Mb/s

Capacità Half / Full Dup lex

Supporto
audio HD

Allo g g i

Connettori
su scheda

30

ALC662

Alloggio PCI-E Gen3 x16 x1

Alloggio PCI Express Gen2 x1 x1

Connettore SATA2 x4 Ciascun connettore supporta 1 unità SATA2

Co nnett o re pannello frontale x 1 S uppor t a i s ervizi de l pann e llo frontale

Connettore audio frontale x1 Supporta la funzione audio pannello frontale

Co lletto r e ventolina C PU x1

Co lletto r e ventolina sistema x1 Alimentazione vent o lina d i s is t ema

Supporto audio High-Definition (HD)

Uscita audio 5.1 canali

(a seconda del CPU )

Alimentazione ventolina CPU (con funzione

Smart Fan)

SPECIFICA

Co lletto r e cance llaz ione CMOS x 1

H61MU3B

I/O
pannello
posteriore

Dimension
i scheda

Connettore USB2.0 x2

Connettore Porta stampante x1

Porta seriale x 1

Connettore alimentaz ione x1

(24 pin)

Connettore alimentaz ione x1

(4 pin)

Tas t ie r a PS / 2 x 1

Mou s e PS/2 x1

Porta VGA x1

Porta DVI-D x1

Porta LAN x 1

Porta USB3.0 x2

Porta USB2.0 x2

Connettore audio x3

180 mm (larghezza) x 226 mm

(altez za)

Ciascun connettore supporta 2 porte USB2.0

pannello frontale

Ciascun connettore supporta 1 Porta

stampante

Sistemi
operativi
supportati

Windows XP / Vista / 7

Biostar si riserva il diritto di aggiungere o

rimuovere il supporto di qualsiasi sistema

operativo senza preavviso.

31

Motherboard Manual

SPANISH

Especificación

CPU

Conjunto de

chips

Súper E/S

Memoria

principal

SATA 2

Red Local

Socket 1155

Pro c esad o r Int e l Co r e i7 / i5 / i3 / Pent iu m /

Celeron

Intel H61

IT8728

Le ofrece las funcionalidades heredadas de

us o más comú n Súper E /S .

Interfaz de cuenta Low Pin

Ranuras DIMM DDR3 x 2

Capacidad máxima de memoria de 16GB

Cada DIMM admite DDR de

512MB/1GB/2GB/4GB/8GB

Controlador ATA Serie Integrado

RTL8111F

Admite Bit de d eshabilitación de ejecución / Intel

SpeedSt ep® Mejorado / Intel Architecture-64 /

Tecnolog ía Extended Memor y 64 / Tecno log ía d e

virtualizac ión / Hyper Thr eading

In iciat ivas d e cont rol d e entorno,

Monitor hardware

Controlador/monitor de velocidad de ventilador

Función "Guardia inteligente" de ITE

Módulo de memoria DDR3 de canal Doble

Admite DDR3 de 1066 / 1333 / 1600

No admite DIMM registrados o DIMM compatibles

con ECC

Tasas de transferencia de hasta 3.0 Gb/s.

Co mp at ible co n la versión S ATA 2 .0

Negociación de 10 / 100 / 1000Mb/s

Funciones Half / Full dúplex

Soporte de

sonido HD

Ranuras

Conectores

en p laca

32

ALC662

Soporte de sonido de Alta Definición

Salida de sonido de 5.1 canales

Ranura PCI-E Gen3 x16 X1 (dependiendo de la CPU)

Ranura PCI-E Gen2 x 1 X1

Conector SATA2 X4 Cada conector soporta 1 dispositivos SATA2

Co nector de p ane l f ront a l X1 S o port a in s t a la c io nes en e l p anel f ront a l

Conector de sonido frontal X1 Soporta funciones de sonido en el panel frontal

Cabecera de ventilador de CPU X1 Fuente de alimentación de ventilador de CPU (con

función Smart Fan)

Cabecera de ventilador de sistema X1 Fuente de alimentación de ventilador de sistema

H61MU3B

Especificación

Cabecera de borrado de CMOS X1

Conector USB2.0 X2 Cada cone ctor s oporta 2 puertos USB2.0 frontales

Conector Puerto de impresora X1 Cada conector soporta 1 Puerto de impresora

Puert o serie X1

Panel

trasero de

E/S

Ta maño d e

la placa

Soporte de

sistema

operativo

Conector de alimentación X1

(24 patillas)

Conector de alimentación X1

(4 patillas)

Tec lad o P S /2 X 1

Ratón PS/2 X1

Puert o VGA X1

Puerto DV I-D X1

Puerto de red local X1

Puert o USB 3.0 X2

Puert o USB 2.0 X2

Conector de sonido X3

180 mm. (A) X 226 Mm. (H)

Windows XP / Vista / 7

Biostar se reserva el derecho de añadir o retirar el

soporte de cualquier SO con o sin aviso previo.

33

Motherboard Manual

PORTUGUESE

Socket 1155

CPU

Chipset

Especificaçã

o Super I/O

Memória

principal

SATA 2

LAN

Suporte

para áudio

de alta

definição

Pro c ess ad o r Intel Co re i7 / i5 / i3 / Pent iu m /

Celeron

Intel H61

IT8728

Proporciona as funcionalidades mais

utilizadas em termos da especificação Super

I/O.

Interface LPC (Low Pin Count).

Ranhuras DIMM DDR3 x 2

Capacidad e máx ima de memó r ia: 16 GB

Cada módulo DIMM suporta uma memória

DDR3 de 512MB/ 1GB/2GB /4GB/8GB

Controlador Serial ATA integrado

RTL8111F

ALC662

ESPECIFICAÇÕES

Suporta as tecno log ias Execute Disab le B it /

Enhanced Int el Sp eedStep® / Intel Arqu ite cture -64

/ Extended Memory 64 / Virtualiz ation / Hype r

Thread ing

In iciat ivas p ara con t ro lo d o a mb iente

Monitorização do hardware

Controlador/Monitor da velocidade da ventoinha

Função "S mart Gu ardian" d a ITE

Módulo de memória DDR3 de canal duplo

Suporta módulos DDR3 1066 / 1333 / 1600

Os módulos DIMM registados e os DIMM ECC não

são suportados

Velocidades de transmissão de dados até 3.0 Gb/s.

Compat ib ilidad e co m a espec if ica ção SATA versão

2.0

Auto negociação de 10 / 100 / 1000Mb/s

Capacidade semi/full-duplex

Suporta a especificação High-Definition Audio

Saída de áudio de 5.1 canais

Ranhuras

Conectores

na placa

Ranhura PCI-E Gen3 x16 x1 (dependendo da CPU)

Ranhura PCI-E Gen2 x 1 x1

Conector SATA2 x4 Cada conector suporta 1 disposit ivo SATA2

Conector do painel frontal x1 Para suporte de várias funções no painel frontal

Conector de áud io frontal x1 Suporta a função de áud io no paine l frontal

Conector da ventoinha da CPU x1

Alimentação da ventoinha da CPU (com a função

Smart Fan)

34

Entradas/S

aídas no

painel

traseiro

Tamanho

da placa

Sistemas

operativos

suportados

H61MU3B

ESPECIFICAÇÕES

Conector da ventoinha do sistema x1 Alimentação da ventoinha do s istema

Conector para limpeza do CMOS x1

Conector USB2.0 x2

Conector da para impressora x1 Cada conector suporta 1 Porta para impressora

Porta s ér ie x1

Conector de alimentação x1

(24 pinos)

Conector de alimentação x1

(4 p inos)

Tec lad o P S /2 x 1

Rato PS/2 x1

Porta VGA x1

Porta DVI-D x 1

Porta LAN x1

Porta USB3.0 x2

Porta USB2.0 x2

Tomada de áudio x3

180 mm (L) X 226 mm (A)

Windows XP / Vista / 7

Cada conector suporta 2 portas USB2.0 no painel

frontal

A Biostar reserva-se o direito de adicionar ou

remover suporte para qualquer sistema operativo

com ou sem avis o prév io.

35

Motherboard Manual

POLISH

SPEC

Procesor

Chipset

Pamięć

główna

Super I/O

SATA 2

LAN

Socket 1155

Pro c esor Int e l Co re i7 / i5 / i3 / Pent ium /

Celeron

Intel H61

Gniazda DDR3 DIMM x 2

Maks. wielkość pamięci 16GB

Każde gniazdo DIMM obs ługuje moduły

512MB/1GB/2GB/4GB/8GB DDR3

IT8728

Zapewnia najbardziej powszechne funkcje

Super I/O.

Interfejs Low Pin Count

Zintegrowany kontroler Serial ATA

RTL8111F

Obsługa Execute D is able B it / Enhan ced Intel

SpeedSt ep® / Intel Ar ch itecture- 64 / Extended

Memory 64 Technology / V irtualization Technology /

Hyp er T hread ing

Mod uł pamięci DDR3 z trybem podwójnego kanału

Obsługa DDR3 1066 / 1333 / 1600

Brak obsług i Register ed DIMM oraz ECC D IMM

Funkcje kontroli warunków pracy,

Mon itor H /W

Kontroler/Monitor prędkości wenty latora

Funkcja ITE "S mart Guardian"

Transfer danych do 3.0 Gb/s.

Zgodność ze specyfikacją SATA w wersj i 2. 0

10 / 100 / 1000 Mb/s z automatyczną negocjacją

szybkości

Obsługa

aud io HD

Gniazda

Złącza

wbud owane

36

Działanie w tryb ie połowicznego / pełnego dupleksu

ALC662

Gniazdo PCI-E Gen3 x16 x1 (w zależności od procesora)

Gniazdo PCI-E Gen2 x 1 x1

Złącze SATA2 x4 Każde złącze obs ługuje 1 urządzenie SATA2

Złącze panela przedniego x1 Obsługa elementów panela przedniego

Przedn ie złącze aud io x1 Obsługa funkcji audio na panelu przednim

Złącze główkowe wenty lat ora

procesora x1

Obsługa H ig h-Def in it io n Aud io

5.1 kanałowe wyjście audio

Zasilanie wentylatora procesora (z funkcją Smart

Fan )

SPEC

H61MU3B

Back Panel

I/O

Wymiary

płyty

Obsluga

systemu

operacyjne

go

Złącze główkowe wenty lat ora

systemowego x1

Złącze główkowe kasowan ia CMOS x 1

Złącze USB2.0 x2

Złącze Port drukarki x1 Każde złącze obs ługuje 1 Port drukarki

Port szeregowy x 1

Złącze zasilania (24 pinowe) x1

Złącze zas ilania (4 p ino we) x1

Klawiatura PS/2 x1

Mys z PS /2 x1

Port VGA x1

Port DVI-D x1

Port LAN x1

Port USB3.0 x2

Port USB2.0 x2

Gniazdo audio x3

180 mm (S) X 226 mm (W)

Windows XP / Vista / 7

Zasilanie wentylatora systemowego

Każde złącze obs ługuje 2 porty USB2.0 na panelu

przednim

Biostar zastrzega sobie prawo dodawania lub

odwoływ ania obsług i dowo lnego s ystemu

operacyjnego bez powiado mienia.

37

Motherboard Manual

RUSSIAN

CPU

(центральн

ый

процессор)

Набо р

микросхем

Основная

память

Super I/O

SATA 2

Локальная

сеть

Звуко ва я

поддержка

жестког о

диска

Слоты

Встроенны

й разъём

38

Socket 1155

Процессор Inte l Core i7 / i5 / i3 / Pent iu m /

Celeron

Intel H61

Слоты DDR3 DIMM x 2

Максимальная ёмкос ть памяти 16 ГБ

Каждый модуль DIMM поддерживает

512МБ /1ГБ/2ГБ /4ГБ/8ГБ DDR3

IT8728

Обеспечивает наиболее используемые

действующие фун кц ио н ал ьн ы е

возможности Super I/O.

Интерфейс с низ ким коли чест во м выводов

Встроенное последовательное устройство

упра вления ATA

RTL8111F

ALC662

Слот PCI-E Gen3 x16 x1 (в зависимости от процессора)

Слот PCI-E Gen2 x 1 x1

Разъ ём SATA2 x4 Каждый разъём поддерживает 1 устр ойство SATA2

Разъ ём на лицевой панели x1 Поддержка устр ойств на лицевой панели

Входной звуковой разъём x1

Контактирующее приспособление

вентил ятора центрального процессора x1

СПЕЦ

Поддержка технологий Execut e D isab le Bit /

Enhanced Inte l SpeedStep® / Int el Architect ure-64

/ Extended Memory 64 Technology / технологии

виртуализация / Hyper Threading

Мод уль памяти с двух кан альным режимом DDR3

Поддержка DDR3 1066 / 1333 / 1600

Не поддерживает зарегистрированные модули

DIMM and ECC DIMM

Инициативы по охране окружающей среды,

Аппаратный монитор

Регул ятор скорости вентилятора/ монитор

Функц ия ITE "Smart Guard ian "

(Интеллектуальная защита)

скорость передачи данных до 3.0 гигабит/с.

Соответствие спецификации SATA версия 2.0

Автоматическо е сог лас овани е 10/100/1000Мб/с

Частичная / полна я дуплексная способность

Звуко ва я поддержка High- Def in it io n

5.1канальный звуковой вых од

Поддержка звуко вых функций на лицевой

панели

Источник питания для вентилятора центрального

процессора (с функц и ей интеллектуального

вентил ятора)

Задняя

панель

средств

ввода-выв

ода

Разм ер

панели

Поддержка

OS

СПЕЦ

Контактирующее приспособление

вентил ятора системы x1

Открытое контактир ующ ее

приспособление CMOS x1

USB2.0-разъём x2

Разъ ём Порт подключения

принтера x1

Последоват ельны й порт x1

Разъ ем питания (24 вы во д) x1

Разъ ем питания (4 вы вод ) x1

Клавиатура PS/2 x1

Мышь PS/2 x1

Пор т VGA x1

Пор т DVI-D x1

Пор т LAN x1

USB3.0-порт x2

USB2.0-порт x2

Гнездо для подключени я

наушников x3

180 мм (Ш) X 226 мм (В)

Windows XP / Vista / 7

Источник пит ания для вентилято р а системы

Каждый разъём поддерживает 2 USB2.0-порта на

лицевой панели

Каждый разъём поддерживает 1 По рт

подключения принтера

Biostar сохраняет за собой право добавлять или

удаля ть средства обеспечения для OS с или без

предварительного уведомле ния.

H61MU3B

39

Motherboard Manual

ARABIC

تﺎﻔﺻاﻮﻤﻟا

ﺎﻴﻨﻘ ﺗ ﻢﻋﺪﺗ ت Execute D isab le B it / Enhanced Intel

SpeedSt ep® / Intel Ar ch itecture- 64 / Extended

Memory 64 Technology / Virtualization Technology /

Hyp er T hread ing

Intel H61

تﺎﺠﻟﺎﻌﻣIntel Cor e i7 / i5 / i3 / Pentiu m /

ﺔﺤﺘﻓDDR3 DIM M دﺪﻋ2

ىﻮﺼﻗ ةﺮآاذ ﺔﻌﺳ16 ﺖیﺎﺑ ﺎﺠﻴﺝ

ﺔﺤﺘﻓ ﻞآ ﻢﻋﺪﺗDIMM عﻮﻥ ﻦﻣ ةﺮآاذ ﻢﻋﺪﺗ DDR3 ﺔﻌﺳ

ﺔﻔﻴﻇو"S mart Gu ard ian" ﻦﻣ IT E

ضوﺎﻔﺗ ﻲﺋﺎﻘﻠﺗ 10/100/1000 ﺎﺠﻴﻣ ﺖیﺎﺑ / ﺔﻴﻧﺎﺛ ﺔﻴﻥﺎﻜ ﻣإ

/512 و ﺖیﺎﺑ ﺎﺠﻴﻣ 1/

ﻞﻘﻥ ﻟاتﺎﻥﺎﻴﺒ تﺎﻋﺮﺴﺑ ﻞﺼﺗ ﻰﻟإ 3.0 ﺖﺑﺎﺠﻴﺝ/ﺔﻴﻥﺎﺙ.

ﺔﻘﺑﺎﻄﻣ تﺎﻔﺹاﻮﻤﻟ SATA راﺪﺹﻹا 2.0

ﻢﻋﺪﺗ ةﺮآاﺬﻟا ﻦﻣ عﻮﻥ DDR3 تﺎﻌﺳ 1066 /

1600/ 1333 ﺎﺠﻴﻣ ﻼﺘیﺎﺑ ﻢﻋﺪﺗ ﻖﺋﺎﻗر اﺬﻟا ةﺮآ

DIMM ﻚﻠﺗو ﻲﺘﻟا ﻻ ﻖﻓاﻮﺘﺗ ﻊﻣ ECC

و2/و 4/و 8 ﺎﺠﻴﺝﺖیﺎﺑ

ﻞﺋﺎﺳو ﻢﻜﺤﺘﻟا ﻲﻓ ﺔﺌﻴﺒﻟا:

ﺐﻗاﺮﻣ ﺔﻓﺮﻌﻤﻟ ﺔﻟﺎﺣ ةﺰﻬﺝﻷا

ﺐﻗاﺮﻣ ﻲﻓ ﺔﻋﺮ ﺳ ﺔﺣوﺮﻤﻟا

ﻞﻘﻨﻟا جودﺰﻤﻟا ﻞﻣﺎﻜﻟا/ﻲﻔﺼﻨﻟا

ﺮﻓﻮﺗ ﺔﻔ ﻴﻇو Super I/O ﺮﺜآﻷا ًﺎﻣ ا ﺪ ﺨﺘ ﺳا.

ﺗﻢﻋﺪ ﺔﻴﻨﻘﺗ Low Pin Count Interface

Socket 1155

Celeron ﺑ ددﺮﺘ ی ﻰﻟإ ﻞﺼ

DDR3 ﺔﺝودﺰﻣ ةﺎﻨﻘﻟا

IT8728

ﻢﻜﺤﺘﻣ Serial ATA ﻞﻣﺎﻜﺘﻣ

RTL8111F

ةﺪﺣو ﺔﺠﻟﺎﻌﻤﻟا

ﺔیﺰآﺮﻤﻟا

ﺔﻋﻮﻤﺠﻣ ﺢﺋاﺮﺸﻟا

ةﺮآاﺬﻟا ﺔﻴﺴﻴﺋﺮﻟا

Super I/O

SATA 2

ﺔﻜﺒﺵ ﺔﻴﻠﺥاد

40

ﻢﻋﺪﺗ ﺔﻴﻨﻘﺗ تﻮﺼﻟا ﻲﻟ ﺎﻋ ﻒیﺮﻌﺘﻟا ﻦﻣ

5.1 تاﻮﻨﻗ جﺮﺨﻟ تﻮﺼﻟا

(ادﺎﻤﺘﻋا ﻰﻠﻋ ةﺪﺣو ﺔﺠﻟﺎﻌﻤﻟا ﺔیﺰآﺮﻤﻟا) ﺔﺤﺘﻓPCI-E Gen3 x16 دﺪﻋ1

ﺔﺤﺘﻓPC I- E Ge n2 x 1 دﺪﻋ1

ةﺰﻬﺝأ ﻦﻣ ﺪﺣاو ﺬﻔﻨﻣ ﻞآ ﻢﻋﺪیSATA2 ﺬﻔﻨﻣSATA2 دﺪﻋ4

ﺔﻴﻣﺎﻣﻷ ا ﺔﺣﻮﻠﻟا تاﺰﻴﻬﺠﺗ ﻢﻋﺪی ﻣﻷا ﺔﺣﻮﻠﻟا ﺬﻔﻨﻣﺔﻴﻣﺎ دﺪﻋ1

ﺔﻴﻣﺎﻣﻷا ﺔﺣﻮﻠﻟﺎ ﺑ تﻮﺼﻟا ﺔﻔﻴﻇو ﻢﻋﺪی ﻲﻣﺎﻣﻷا تﻮﺼﻟا ﺬﻔﻨﻣ دﺪﻋ1

ﺔﻔﻴﻇو ﻊﻣ ﺔﺠﻟﺎﻌﻤﻟا ةﺪﺣو ﺔﺣوﺮﻤﻟ ﺔﻗﺎﻄﻟا ﻞﻴﺹﻮﺘﻟSmart Fan ﺔیﺰآﺮﻤﻟا ﺔﺠﻟﺎﻌﻤﻟا ةﺪﺣو ﺔﺣوﺮﻣ ﺔﻠﺹو دﺪﻋ1

ALC662

ﻢﻋد تﻮﺼﻟا ﻲﻟﺎﻋ

ﻒیﺮﻌﺘﻟا

تﺎﺤﺘﻔﻟا

ﺬﻓﺎﻨﻤﻟا ﻰﻠﻋ ﺢﻄﺳ

ﺔﺣﻮﻠﻟا

تﺎﻔﺻاﻮﻤﻟا

مﺎﻈﻨﻟا ﺔﺣوﺮﻤﻟ ﺔﻗﺎﻄﻟا ﻞﻴﺹﻮﺘﻟ مﺎﻈﻨﻟا ﺔﺣوﺮﻣ ﺔﻠﺹو دﺪﻋ1

ﺢﺴ ﻣ ﺔﻠﺹوCMOS دﺪﻋ1

ﻣ ﻞآ ﻢﻋﺪی ﻲﺘ ﺤﺘﻓ ﺬﻔﻨUSB2.0ﺔﻴﻣﺎﻣﻷ ا ﺔﺣﻮﻠﻟﺎﺑ ﺬﻔﻨﻣUSB2.0 دﺪﻋ2

ﺔﻌﺑﺎﻃ ﺬﻔﻨﻣ دﺪﻋ1

ﻲﻠﺴﻠﺴﺗ ﺬﻔ ﻨﻣ دﺪﻋ1

ﺔﻗﺎﻄﻟا ﻞﻴﺹﻮﺗ ﺬﻔﻨﻣ)24سﻮﺑد( دﺪﻋ1

ﺔﻗﺎﻄﻟا ﻞﻴﺹﻮﺗ ﺬﻔﻨﻣ)4ﺲﻴﺑﺎﺑد( دﺪﻋ1

H61MU3B

ﺢﻴﺗﺎﻔﻣ ﺔﺣﻮﻟPS/2 دﺪﻋ1

ﻆﻔﺘﺤﺗ Biostar ﺎﻬﻘﺤﺑ ﻲﻓ ﺔﻓﺎﺿإ وأ ﺔﻟازإ ﻢﻋﺪﻟا يﻷ مﺎﻈﻥ ﻞﻴﻐﺸﺗ رﺎﻄﺥﺈﺑ وأ

نوﺪﺑ رﺎﻄﺥإ.

180 ﻢﻣ)ضﺮﻋ (X 226 ﻢﻣ)عﺎﻔﺗرا(

Windows XP / Vista / 7

سوﺎﻣ PS/2 دﺪﻋ1

ﺬﻓﺎﻨﻣVGA دﺪﻋ1

ﺬﻓﺎﻨﻣDV I-D دﺪﻋ1

ﻔﻨﻣﺔﻴﻠﺤﻣ لﺎﺼﺗا ﺔﻜﺒﺵ ﺬ دﺪﻋ1

ﺬﻓﺎﻨﻣ ﻞﺥد/جﺮﺥ

ﺔﺣﻮﻠﻟا ﺔﻴﻔﻠﺨﻟا

ﺬﻓﺎﻨﻣ3.0US B دﺪﻋ2

ﺬﻓﺎﻨﻣ2.0US B دﺪﻋ2

تﻮﺹ ﺲﺒﻘﻣ دﺪﻋ3

ﻢﺠﺣ ﺔﺣﻮﻠﻟا

ﻢﻋد ﺔﻤﻈﻥأ ﻞﻴﻐﺸﺘﻟا

41

Motherboard Manual

JAPANESE

仕様

CPU

チップセット

メインメモリ

Super I/O

SATA 2

LAN

Socket 1155

Int e l C or e i7 / i5 / i3 / P ent ium / C eleron プロ

セッサ

Intel H61

DDR3 DIMMスロット x 2

最大メモリ容量16GB

各DIMMは 512MB/1GB/2GB/4GB/8GB DDR3

をサポート

IT8728

もっとも一般に使用されるレガシーSuper I/O機

能を採用しています。

低ピンカウントインターフェイス

統合シリアルATA コントローラ

RTL8111F

Execute Disab le B it / Enhanced Intel Sp eedStep® /

Intel Architecture-64 / Extended Memory 64

Technology / Virtualization Technology / Hyper

Thread ingをサポートします

デュアル チャンネルモードDDR3 メモリモジュール

DDR3 1066 / 1333 / 1600 をサポート

登録済みDIMMとECC DIMMはサポートされません

環境コントロールイニシアチブ、

H/Wモニター

ファン速度コントローラ/ モニター

ITE の「スマートガーディアン」機能

最高3.0 Gb/秒のデータ転送速度

SATAバージョン2.0仕様に準拠

10 / 100 /1000Mb/秒のオートネゴシエーション

半/全二重機能

HDオーディ

オのサポート

スロット

オンボードコ

ネクタ

42

ALC662

ハイデフィニションオーディオのサポート

5.1 チャンネルオーディオアウト

PCI-E Gen3 x16スロット x1 (CPUに依存）

PCI Express Gen2 x 1スロット x1

SATA2コネクタ x4 各コネクタは1つのSATA2デバイスをサポートします

フロントパネルコネクタ x1 フロントパネル機能をサポートします

フロントオーディオコネクタ x1 フロントパネルオーディオ機能をサポートします

CPUファンヘッダ x1 CPUファン電源装置(スマートファン機能を搭載)

システムファンヘッダ x1 システムファン電源装置

CMOSクリアヘッダ x1

仕様

H61MU3B

背面パネル

I/O

ボードサイズ

OSサポート

USB2.0コネクタ x2

プリンタポートコネクタ x1 各コネクタは1つのプリンタポートをサポートします

シリアルポート x1

電源コネクタ(24 ピン) x1

電源コネクタ(4ピン) x1

PS/2キーボード x1

PS/2マウス x1

VGAポート x1

DVI-Dポート x1

LANポート x1

USB3.0ポート x2

USB2.0ポート x2

オーディオジャック x3

180 mm (幅) X 226 mm (高さ)

Windows XP / Vista / 7

各コネクタは2つのフロントパネルUSB2.0ポートをサポ

ートします

Biostarは事前のサポートなしにOSサポートを追加または

削除する権利を留保します。

2012/03/14

43