Bionime BM300 OEM Installation Manual
華 廣 生 技 股 份 有 限 公 司
Date
Check List
Subject：工程規格書/Engineering Specification
Doc. No.：
Project Code： Model Name： BM300
Change History
CICN NO# Page Rev.
0 First Released
Effective
Rev.：
Page：
Effective Date：
Reason For Release
0
1
OF
Copy to (all contents)：
Copy to(cover sheet)：
Approved By ：
Prepare By：
Form No：FT-73-01-10
D
Reviewed By
Dep. Manager Executor Dep. Manager Executor
SL
□
□
□
MK
CT
■PD
□PM
■PE
□TW
■QC
□
QA
□
LM
□
PO
■
AU
□
□
RO
華 廣 生 技 股 份 有 限 公 司
Check List
Subject：工程規格書/Engineering Specification
Doc. No.：
Project Code： Model Name： BM300
Rev.：
Page：
Effective Date：
0
2
OF
NCC 警語
「減少電磁波影響，請妥善使用」。
依據低功率電波輻射性電機管理辦法
第十二條 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均 不得擅自變更頻率、加大功率
或變更原設計之特性及功能。
第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干 擾現象時，應立即停用，並改
善至無干擾時方得繼續使用。
前項合法通信，指依電信法規定作業之無線電通信。 低功率射頻電機須忍受合法通信或工業、科學
及醫療用電波輻射性電機 設備之干擾。」
Form No：FT-73-01-10
D
華 廣 生 技 股 份 有 限 公 司
Check List
Subject：工程規格書/Engineering Specification
Doc. No.：
Project Code： Model Name： BM300
Rev.：
Page：
Effective Date：
0
3
OF
FCC Statement:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
FCC Label Instructions:
The outside of final products that contains this module device must display a label referring to the
enclosed module. This exterior label can use wording such as the following: “Contains Transmitter
Module FCC ID: [put FCC ID here]” or “Contains FCC ID: [put FCC ID here].” Any similar wording that
expresses the same meaning may be used.
Form No：FT-73-01-10
D
華 廣 生 技 股 份 有 限 公 司
Check List
Subject：工程規格書/Engineering Specification
Doc. No.：
Project Code： Model Name： BM300
Feature：
Item Specification
Chip DA14580
Standard Bluetooth V4.1
RF band 2402 ~ 2480MHz
Interface UART
RF Output Power -20dBm ~0 dBm
Sensitivity >-93 dBm
Rev.：
Page：
Effective Date：
ISM band
0
4
OF
Remark
Mechanical Specifications
Item Standard Value Unit
Outline Dimension 12.25 (W) * 15.26 (L) * 1.9 (H) mm
Form No：FT-73-01-10
D
華 廣 生 技 股 份 有 限 公 司
Check List
Subject：工程規格書/Engineering Specification
Doc. No.：
Project Code： Model Name： BM300
Rev.：
Page：
Effective Date：
Absolute Maximum Ratings
Module
Item Symbol Condition Min. Max. Unit
System Power Supply Voltage VDD - -0.1 +3.6 V
Operating Temperature TOP - -0 +50 °C
Storage Temperature TST - -20 +70 °C
Storage Humidity HD Ta ≦ 40 °C 20 80 %RH
DC Electrical Characteristics
Module GND = 0V, Ta = 25°C
0
5
OF
Item Symbol
Power Supply Voltage VDD - 2.5 3.0 3.3 V
VIH - 0.84 - - V
Input Signal Voltage
VIL - - - 0.36 V
VOH - 1.88 - - V
Output Signal Voltage
VOL - - - 0.47 V
Supply Current IDD
Condition Min. Typ. Max. Unit
VCC =3.0V *1 - mA
VCC =3.0V *2 uA
Form No：FT-73-01-10
D
Loading...