Binatone Reliant 510 User Manual

1

Reliant 510

Reliant 510

FLASH/ESC

MUTE

REDIAL/PAUSE

If you need help …

The Binatone Help Line is available

0845 345 9677

from 9.00 am to 5.00 pm, Monday
to Friday, on

Calls are charged at Local Call rate.
Or visit our website:

www.binatonetelecom.com

2

1. Where to find it

FLASH/ESC

MUTE

REDIAL/PAUSE

- In standby, press to access

UP-DOWN (Calls) Buttons

options.

- Press to delete

DEL

SPEAKERPHONE Button

- Turns ON when the TAM

MESSAGE light

MENU/OK Button

- Press to access the

Phonebook records.

(PHONEBOOK) Button

- In standby, press and

-Press during message

- Press to play back

Press to pause playing of
a memo or message.

PLAY/PAUSE Button

Button - Press to stop

(ANSWER ON/OFF)

playback to skip to the
next message.

messages and memos.

- Press during a call to

mouthpiece.

mute the microphone or

MUTE Button

MEMO/FORWARD Button

is on. Flashes when you
have new TAM messages.

recording or playback.

REWIND /OGM Button

- In standby, press to play

current message or press

- You may need the

BT Calling Features.

FLASH/ESC Button

your phone is connected

to a PBX, or if you use

- Press to access the

when dialling.

PAUSE/REDIAL Button

Press to insert a pause

- Press to view the Redial

OUT Button

- Slide forward or backward
level of the Loudspeaker.

SPEAKER VOLUME control

Microphone -

answering machine

For

speakerphone use and

OGM & Memo recording.

- Press to make, answer, or
end a call using the
speakerphone.

- Press to enter the Options

This is on when phone
is on a call.

IN USE light

outgoing message.

- In lists, press to scroll

the caller dispaly records.

through

(Delete) Button

In standby, press and hold
to switch the answering
machine ON or OFF, and
and when the TAM is on
press to select OGM1 or

- During playback, press
once to repeat the

twice to skip back to the
previous message.

- When in menus or pre-

dialling, press to exit

from the function.

RECALL(Flash) function if

list in standby mode or

during a call.

hold to record a memo.

messages, memos,
stored numbers or Caller

Display records.

OGM2.

to adjust the volume

your current OGM, or press
and hold to record a new

Redial list when in
standby mode.

-When the instruction simply say 'press' a button, this means you should
press it briefly then release it.

-When the instruction say 'press and hold' a button, this means you should

Important:

keep it pressed until the display changes or you hear a tone.

3

Phone

You are connected to the telephone line - your
Handset is ‘offhook’.

Time Displays the time.

Date/Month Displays the date and month.

Speakerphone

Appears when the speakerphone function is
turned ON.

Appears when you press the MUTE button to

Message

Appears when viewing a Caller display entry
where an answering machine message was

NEW

records.

Caller Display
Record

Shows the total number of Caller Display records
when the caller display is being received or when
the call list is being viewed.

mute the mouthpiece or microphone.

Appears when viewing New Caller Display

recorded.

XX

Indicates the total number of answering machine
messages recorded (XX from 00 to 59) and the
total number of caller display records saved (YY
from 00 to 99) . When steady on, there are no
new entries in either list.

Flashing alternately with the screen above,
indicates the number of new answering machine
messages recorded and the number of new

MESSAGES

CALLS

YY

XX

YY

NEW

NEW

caller display records received.

4

1. Locating the Base unit

2. Plug the coiled handset cord into the Handset. Plug the other end into

the jack on the left side of the Base unit.

3. Place the Handset on
the Base unit.

4. Plug the telephone line cord into
the PHONE LINE jack at the

end into your telephone line socket

5. Plug the power supply cord into

the POWER jack at the bottom of
into a 230V AC, 50Hz mains

socket, with the switch on the
socket set to OFF

6.Switch ON the mains power at
the socket. Wait while the

7.Lift the Handset and check

Make sure

display shows INITIALISATION,

Answering

machine on.

Announcement one

before

the display changes to the

“

”

standby screen.

bottom of the Base unit. Plug the other

Always use the telephone
line cord supplied with your

line cords may not work.

to Modular
Wall jack

for Dial tone in the earpiece

Note: The base unit doesn't require a battery.

the Base unit. Plug the other end

then the announcement

2. Installation

or extension socket.

Note:The Reliant 510
Base unit must be used
only the power adapter

supplied- 5E-AD070042-B.

the plugs click

into place.

Phone. Other telephone

The Base unit should be placed on a level surface, in a position where:

 the mains adapter plug will reach an easily accessible 230-V AC



extension socket.



might get wet.



machines, microwave ovens, TVs, fluorescent lights, etc.

cable.
the telephone line cable will reach your telephone line socket or

it is not close to a sink, bath or shower, or anywhere else where it

switched mains supply socket - never try to lengthen the mains power

it is not close to other electrical equipment - fridges, washing

5

Binatone Help Line - 0845 345 9677

Calls are charged at Local Call rate.

BE CAREFUL to check that there are no pipes or electrical wires hidden in the
wall.
Fix two screws (not supplied) at the marked locations, leaving approximately

Hang the base unit on the screws using the wall mount slots.

You may need to remove the telephone from the wall and tighten the screws

the cradle with the

parking hook on the cradle arranged to fit in the

parking recess

102

NOTE: For wall-mounting, the Parking Hook

If you have a

Broadband line

If you connect your telephone to a line

otherwise you may get interference

with a broadband connection, you will

need to insert a micro-filter between

In a home with broadband, every telephone must have a micro-filter connected,
not just the one at the telephone point that your modem is connected to.
If you need more broadband micro-filters, contact your broadband supplier.

3. Wall Mount installation

Mark two points on the wall that are 102mm

apart to lay the fixing centres as

the telephone and the telephone line,

between the telephone and the broadband,

which could cause problems.

so that the base is securely fixed and does not wobble.

under the earpiece on the Handset.

7mm between the wall and the screw head.

Place the Handset on

shown below.

in the base must be slid out, turned 180

degrees and slid back in place.

6

Binatone Help Line - 0845 345 9677

Calls are charged at Local Call rate.

The following section details how to set up your telephone.

 SET LANGUAGE
 SET TIME/DATE
 SET FLASH TIME
 LCD CONTRAST
 MESSAGE LENGTH
 RINGS TO ANSWER
 REMOTE ACCESS
 TAM HD: ON/OFF

Note: The system will time out if you leave more than
10 seconds between key presses.

!

With the phone in standby mode;

1 Press MENU/OK button.

Ö The display shows

OPTIONS MENUOPTIONS MENU

OPTIONS MENUOPTIONS MENU

OPTIONS MENU

.

2 Press UP button to go to the language setting.

Ö

The display shows

SET LANGUAGESET LANGUAGE

SET LANGUAGESET LANGUAGE

SET LANGUAGE

.

3 Press MENU/OK button to confirm.
4 Press UP or DOWN button to select ENGLISH

(default), FRANCAIS, or DEUTSCH.

5 Press MENU/OK button to confirm.
6 Continue with programming, or press /

button to return to standby mode.

SET
LANGUAGE



EXIT OPTION

Ö

To set the Answering Machine

Press the MENU button to enter the Options menu and
then use the UP or DOWN buttons to cycle through the
following options:

recording quality / total recording time. (ON gives up

4. Setting up the Reliant 510

to 20 minutes of higher quality, OFF gives up to 40
minutes of lower quality.)

7

Binatone Help Line - 0845 345 9677

Calls are charged at Local Call rate.

1 Press MENU/OK button.

Ö The display shows

OPTIONS MENUOPTIONS MENU

OPTIONS MENUOPTIONS MENU

OPTIONS MENU

.

2 Press UP or DOWN button until the display

shows

SET TIME/DATESET TIME/DATE

SET TIME/DATESET TIME/DATE

SET TIME/DATE

.

3 Press MENU/OK button to confirm.

The‘year’ will be blinking.

SET TIME/
DATE

(see section 8) the time and date will be set

automatically, but the year may still need to be

Ö

Note: If you subscribe to the caller display service

stamp gives the correct day.

adjusted to ensure the answering machine time

4 Press UP or DOWN button to set the year.

5 Press MENU/OK button to confirm.

Ö The ‘month’ will be blinking.

6 Press UP or DOWN button to set the month.
7 Press MENU/OK button to confirm.

Ö The ‘date’ will be blinking.

8 Press UP or DOWN button to set the date.

9 Press MENU/OK button to confirm.

Ö The ‘hour’ will be blinking.

10 Press UP or DOWN button to set the hour.

11 Press MENU/OK button to confirm.

Ö The ‘minutes’ will be blinking.

12 Press UP or DOWN button to set the minutes.
13 Press MENU/OK button to confirm the TIME and

DATE setting.

14 Continue with programming, or press /

button to return to standby mode.

When setting the ' hour it is in 24 hour

Ö

mode only.

Setting up continue...

8

Binatone Help Line - 0845 345 9677

Calls are charged at Local Call rate.

1

Press MENU/OK button.

Ö The display shows

OPTIONS MENUOPTIONS MENU

OPTIONS MENUOPTIONS MENU

OPTIONS MENU

.

2

Press UP or DOWN button until the display
shows

SET FLASH TIMESET FLASH TIME

SET FLASH TIMESET FLASH TIME

SET FLASH TIME

.

3 Press MENU/OK button to confirm.

SET FLASH
TIME

4

Press UP or DOWN button to select 100MS
(default), 300MS, 600MS or 1000MS.

Setting up continue...

You may need the Recall function if your phone is
connected to a PBX, or if you use BT Calling
Features.
Flash is another name for the R (Recall) button,

and the normal UK requirement is for 100ms, but

some PBX may need a longer time, in which case

you can change the setting from the Options Menu.

5 Press MENU/OK button to confirm.
6 Continue with programming, or press /

button to return to standby mode.

1 Press MENU/OK button.

Ö The display shows

OPTIONS MENUOPTIONS MENU

OPTIONS MENUOPTIONS MENU

OPTIONS MENU

.

2 Press UP or DOWN button until the display

shows

LCD CONTRASTLCD CONTRAST

LCD CONTRASTLCD CONTRAST

LCD CONTRAST

.

3 Press MENU/OK button to confirm.
4 Press UP or DOWN button to select your

comfor table display viewing level (1~5). The
default setting is 3.

5 Press MENU/OK button to confirm.
6 Continue with programming, or press /

button to return to standby mode.

LCD
CONTRAST

9

Binatone Help Line - 0845 345 9677

Calls are charged at Local Call rate.

1 Press MENU/OK button.

Ö The display shows

OPTIONS MENUOPTIONS MENU

OPTIONS MENUOPTIONS MENU

OPTIONS MENU

.

2 Press UP or DOWN button until the display

shows

MESSAGE LENGTHMESSAGE LENGTH

MESSAGE LENGTHMESSAGE LENGTH

MESSAGE LENGTH

.

3 Press MENU/OK button to confirm.
4 Press UP or DOWN button to select 1 or 2

minutes. The default setting is 2 minutes.

5 Press MENU/OK button to confirm the MESSAGE

LENGTH setting.

6 Continue with programming, or press /

button to return to standby mode.

MESSAGE

LENGTH

Setting up continue...

To set the maximum recording time for each
incoming message or memo message on the
Answering Machine.

To set the number of rings before the machine
answers a call;

1 Press MENU/OK button.

Ö The display shows

OPTIONS MENUOPTIONS MENU

OPTIONS MENUOPTIONS MENU

OPTIONS MENU

.

RINGS TO
ANSWER

2 Press UP or DOWN button until the display

shows

RINGS TO ANSWERRINGS TO ANSWER

RINGS TO ANSWERRINGS TO ANSWER

RINGS TO ANSWER

.

3 Press MENU/OK button to confirm.
4

Ö

5 Press MENU/OK button to confirm.
6 Continue with programming, or press /

button to return to standby mode.

Press UP or DOWN button to select TOLL SAVER,

2,3,4,5,6,7,8, or 9 rings. The default setting is 5.

Use 'TOLL SAVER' when checking your

using a long distance service or from a pay phone.
The Answering machine responds after the 2nd ring
only if you have a new message recorded. If there
are no new messages, the phone will answer after
the 4th ring. You can then hang up after the 3rd
ring to avoid paying for the call.

Reliant 510 for messages from a remote location

10

Binatone Help Line - 0845 345 9677

Calls are charged at Local Call rate.

1 Press MENU/OK button.

Ö The display shows

OPTIONS MENUOPTIONS MENU

OPTIONS MENUOPTIONS MENU

OPTIONS MENU

.

2 Press UP or DOWN button until the display

shows

REMOTE ACCESSREMOTE ACCESS

REMOTE ACCESSREMOTE ACCESS

REMOTE ACCESS

.

3 Press MENU/OK button to confirm.

Ö

4 Press UP or DOWN button to set the first digit

REMOTE
ACCESS

5 Press MENU/OK button to confirm.

Ö

6 Press UP or DOWN button to set the second

digit of the REMOTE ACCESS code.

7 Press MENU/OK button to confirm.

Ö

Setting up continue...

The third digit of the code will be blinking.

The second digit of the code will be blinking.

of the REMOTE ACCESS code.

The first digit of the code will be blinking.

The REMOTE ACCESS is a three-digit code you

need if you call away from home to check your
messages. The default is 321. You can change

it to any three digits you want.

8 Press UP or DOWN button to set the third

digit of the REMOTE ACCESS code.

9 Press MENU/OK button to confirm the REMOTE

ACCESS setting.

10 Press /STOP button to return to standby mode.

11

Binatone Help Line - 0845 345 9677

Calls are charged at Local Call rate.

1 Press MENU/OK button.

Ö

The display shows

TAM HD:
ON/OFF setting

OPTIONS MENUOPTIONS MENU

OPTIONS MENU

OPTIONS MENU

OPTIONS MENU

.

2

Press UP or DOWN button until display shows

3

Press MENU/OK button to confirm.

Ö

4

5

TAMHD:ON (or OFF).

quality will be higher, but it will only save up to
With the compression rate set to OFF the

recording quality will be lower, but it will
save up to about 40 minutes of messages.

setting.

about 20 minutes of messages.

Setting up continue...

Press MENU/OK button to confirm the TAM HD

Press UP or DOWN button to select ON or OFF.

The ON (or OFF) will be blinking.

Two different compression rates (ON and OFF) are
provided for you to select the recording quality/

total recording time of incoming messages.
With the compression rate set to ON the recording