Billion BiPAC 7404VNPX, BiPAC 7404VNOX User Manual
BiPAC 7404VNOX /VNPX
3G/VoIP/802.11n ADSL2+ (VPN)
Firewall Router
User Manual
Version release: 1.12 (5.53.s6.b1.dg4)
Last Revised: Date 03-08-2010
Table of Contents
Chapter 1: Introduction..............................................................................1
Introduction to your Router ......................................................................1
Features...................................................................................................1
Chapter 2: Installing the Router ................................................................5
Important note for using this router..........................................................5
Package Contents....................................................................................5
Device Description ...................................................................................6
The Front LEDs .........................................................................................6
The Rear Ports ..........................................................................................7
Cabling.....................................................................................................8
Chapter 3: Basic Installation .....................................................................9
Connecting Your Router ........................................................................10
Network Configuration ...........................................................................11
Configuring PC in windows 7........................................................................ 11
Configuring PC in Windows Vista...................................................................13
Configuring PC in Windows XP .....................................................................15
Configuring PC in Windows 2000...................................................................16
Configuring PC in Windows NT4.0 .................................................................18
Factory Default Settings.........................................................................19
Information from your ISP ......................................................................20
Configuring with your Web Browser.......................................................21
Chapter 4: Configuration .........................................................................22
Status.....................................................................................................23
ADSL Status ...........................................................................................23
3G Status ..............................................................................................24
EWAN Status..........................................................................................25
iBurst Status ...........................................................................................26
ARP Table .............................................................................................27
DHCP Table ...........................................................................................27
Routing Table .........................................................................................29
NAT Sessions .........................................................................................30
UPnP Portmap ........................................................................................30
PPTP Status ...........................................................................................31
IPSec Status...........................................................................................32
L2TP Status ...........................................................................................32
VoIP Status ............................................................................................33
VoIP Call Log..........................................................................................33
Event Log ..............................................................................................34
Error Log ...............................................................................................35
Diagnostic..............................................................................................35
Quick Start .............................................................................................36
Configuration..........................................................................................41
LAN - Local Area Network.................................................................41
Bridge Interface ..................................................................................41
Ethernet ...........................................................................................42
IP Alias ............................................................................................43
Ethernet Client Filter .............................................................................44
Wireless ...........................................................................................45
Wireless Security.................................................................................48
Wireless Client / MAC Address Filter ..........................................................50
WPS ...............................................................................................51
Port Setting .......................................................................................52
DHCP Server .....................................................................................65
WAN - Wide Area Network................................................................66
WAN Interface ....................................................................................66
WAN Profile .......................................................................................69
ADSL Mode .......................................................................................86
System ..............................................................................................87
Time Zone.........................................................................................87
Remote Access...................................................................................88
Firmware Upgrade ...............................................................................88
Backup / Restore .................................................................................89
Restart Router ....................................................................................90
User Management ...............................................................................91
Mail Alert ..........................................................................................93
Firewall and Access Control..............................................................94
General Settings .................................................................................95
Packet Filter.......................................................................................96
Intrusion Detection .............................................................................101
URL Filter .......................................................................................105
IM / P2P Blocking ..............................................................................108
Firewall Log .....................................................................................109
VPN - Virtual Private Networks ....................................................... 110
PPTP (Point-to-Point Tunneling Protocol) ..................................................110
IPSec (IP Security Protocol) ..................................................................119
L2TP (Layer Two Tunneling Protocol).......................................................128
VoIP - Voice over Internet Protocol.................................................140
SIP Device Parameters .......................................................................141
SIP Accounts ...................................................................................144
Phone Port ......................................................................................145
PSTN Dial Plan (Router with LINE port only)...............................................148
VoIP Dial Plan ..................................................................................152
Call Feature .....................................................................................155
Speed Dial ......................................................................................155
Ring & Tone.....................................................................................156
QoS - Quality of Service..................................................................158
Prioritization.....................................................................................158
Outbound IP Throttling (LAN to WAN) ......................................................159
Inbound IP Throttling (WAN to LAN).........................................................161
Virtual Server ..................................................................................167
Porting Forwarding.............................................................................168
Edit DMZ Host ..................................................................................170
Edit One-to-One NAT (Network Address Translation) ....................................171
Wake on LAN ..................................................................................174
Time Schedule ................................................................................175
Advanced ........................................................................................178
Static Route .....................................................................................178
Static ARP ......................................................................................178
Dynamic DNS...................................................................................179
Device Management...........................................................................180
IGMP.............................................................................................183
VLAN Bridge ....................................................................................184
Chapter 5: Troubleshooting...................................................................185
Logout......................................................................................................187
Appendix: Product Support & Contact.................................................188
Chapter 1: Introduction
Introduction to your Router
Welcome to the 3G/VoIP/ 802.11n ADSL2+(VPN) Firewall Router. The router is an “all-in-one”
ADSL router, combining an ADSL modem, ADSL router and Ethernet network switch functionalities,
providing everything you need to get the machines on your network connected to the Internet over
your ADSL broadband connection. With features such as an ADSL Quick-Start wizard and DHCP
Server, you can be online in no time at all and with a minimum of fuss and configuration, catering for
first-time users to the guru requiring advanced features and control over their Internet connection
and network.
Features
Express Internet Access
The router complies with ADSL worldwide standards. It supports downstream rate up to 12/24 Mbps
with ADSL2/2+, 8Mbps with ADSL. Users enjoy not only high-speed ADSL services but also
broadband multimedia applications such as interactive gaming, video streaming and real-time audio
much easier and faster than ever. It is compliant with Multi-Mode standard (ANSI T1.413, Issue 2;
G.dmt (ITU G.992.1); G.lite (ITU G.992.2); G.hs (ITU G994.1); G.dmt.bis (ITU G.992.3);
G.dmt.bis.plus (ITU G.992.5)).
3G
3G-based Internet connection (requires an additional 3G USB modem), with automatic fail-over to
ensure an always-on Internet connection in the event that one of your Internet services fails. Secure
WLAN setup is simplified by the web browser-based configuration for easy access to the Internet
wherever a 3G connection is available - whether you're seated at your desk or taking a
cross-country train trip.
EWAN
Besides using 3G/ADSL to get connected to the Internet, the router offers its Ethernet port 1 as a
WAN port to be used to connect to Cable Modems and fiber optic lines. This alternative, yet faster
method to connect to the internet will provide users more flexibility to get online.
Dual WAN
Dual WAN is a new way of getting connected to the internet which is to use each two of the
3G/ADSL/EWAN to deal with the unexpected case and balance traffic load. That is a way of
improving greatly the robustness.
802.11n Wireless AP with WPA Support
With an integrated 802.11n Wireless Access Point in the router, the device delivers up to 6 times
faster speeds and 3 times farther range than an 802.11b/g wireless network. It offers a quick yet
1
easily accessible and mobile to the users among wired network, wireless network, broadband
connection (ADSL). In addition to having a 300Mbps. data rate, it is also backward compatible with
existing 802.11b/11g equipments. The supported features of Wi-Fi Protected Access (WPA- PSK/
WPA2-PSK) and Wired Equivalent Privacy (WEP) enhance the security level of data protection and
access control via Wireless
Fast Ethernet Switch
A 4-port 10/100/1000Mbps fast Ethernet switch is built in with automatic switching between MDI and
MDI-X for 10Base-T, 100Base-TX and 1000Base-TX ports. An Ethernet straight or crossover cable
can be used directly for auto detection.
Multi-Protocol to Establish a Connection
It supports PPPoA (RFC 2364 - PPP over ATM Adaptation Layer 5), RFC 1483 encapsulation
overATM (bridged or routed), PPP over Ethernet (RFC 2516), and IPoA (RFC1577) to establish a
connection with the ISP. The product also supports VC-based and LLC-based multiplexing.
Quick Installation Wizard
It supports a WEB GUI page to install this device quickly. With this wizard, end users can enter the
information easily which they get from their ISP, then surf the Internet immediately.
Universal Plug and Play (UPnP) and UPnP NAT Traversal
This protocol is used to enable simple and robust connectivity among stand-alone devices and PCs
from many different vendors. It makes network simple and affordable for users. UPnP architecture
leverages TCP/IP and the Web to enable seamless proximity networking in addition to control and
data transfer among networked devices. With this feature enabled, users can now connect to Net
meeting or MSN Messenger seamlessly.
Network Address Translation (NAT)
Allows multi-users to access outside resources such as the Internet simultaneously with one IP
address/one Internet access account. Many application layer gateway (ALG) are supported such as
web browser, ICQ, FTP, Telnet, E-mail, News, Net2phone, Ping, NetMeeting, IP phone and others.
SOHO Firewall Security with DoS and SPI
Along with the built-in NAT natural firewall feature, the router also provides advanced hacker
pattern-filtering protection. It can automatically detect and block Denial of Service (DoS) attacks.
The router is built with Stateful Packet Inspection (SPI) to determine if a data packet is allowed
through the firewall to the private LAN.
Domain Name System (DNS) Relay
It provides an easy way to map the domain name (a friendly name for users such as www.yahoo.
2
com) and IP address. When a local machine sets its DNS server with this router’s IP address, every
DNS conversion request packet from the PC to this router will be forwarded to the real DNS in the
outside network.
Dynamic Domain Name System (DDNS)
The Dynamic DNS service allows you to alias a dynamic IP address to a static hostname. This
dynamic IP address is the WAN IP address. For example, to use the service, you must first apply for
an account from a DDNS service like http://www.dyndns.org/. More than 5 DDNS servers are
supported.
Quality of Service (QoS)
QoS gives you full control over which types of outgoing data traffic should be given priority by the
router, ensuring important data like gaming packets, customer information, or management
information move through the router ay lightning speed, even under heavy load. The QoS features
are configurable by source IP address, destination IP address, protocol, and port. You can throttle
the speed at which different types of outgoing data pass through the router, to ensure P2P users
don’t saturate upload bandwidth, or office browsing doesn’t bring client web serving to a halt. In
addition, or alternatively, you can simply change the priority of different types of upload data and
let the router sort out the actual speeds.
Virtual Server (“port forwarding”)
Users can specify some services to be visible from outside users. The router can detect incoming
service requests and forward either a single port or a range of ports to the specific local computer to
handle it. For example, a user can assign a PC in the LAN acting as a WEB server inside and
expose it to the outside network. Outside users can browse inside web servers directly while it is
protected by NAT. A DMZ host setting is also provided to a local computer exposed to the outside
network, Internet.
Rich Packet Filtering
Not only filters the packet based on IP address, but also based on Port numbers. It will filter
packets from and to the Internet, and also provides a higher level of security control.
Dynamic Host Configuration Protocol (DHCP) Client and Server
In the WAN site, the DHCP client can get an IP address from the Internet Service Provider (ISP)
automatically. In the LAN site, the DHCP server can allocate a range of client IP addresses and
distribute them including IP address, subnet mask as well as DNS IP address to local computers. It
provides an easy way to manage the local IP network.
Static and RIP1/2 Routing
It has routing capability and supports easy static routing table or RIP1/2 routing protocol.
3
Simple Network Management Protocol (SNMP)
It is an easy way to remotely manage the router via SNMP.
Web based GUI
It supports web based GUI for configuration and management. It is user-friendly and comes with
on-line help. It also supports remote management capability for remote users to configure and
manage this product.
Firmware Upgradeable
Device can be upgraded to the latest firmware through the WEB based GUI.
Rich Management Interfaces
It supports flexible management interfaces with local console port, LAN port, and WAN port. Users
can use terminal applications through the console port to configure and manage the device, or
Telnet, WEB GUI, and SNMP through LAN or WAN ports to configure and manage the device.
Virtual Private Network (VPN)
It allows user to make a tunnel with a remote site directly to secure the data transmission among the
connection. User can use embedded PPTP and L2TP client/server, IKE and IPSec which are
supported by this router to make a VPN connection or users can run the PPTP client in PC and the
router already provides IPSec and PPTP pass through function to establish a VPN connection if
the user likes to run the PPTP client in his local computer.
4
Chapter 2: Installing the Router
Important note for using this router
Package Contents
3G/VoIP/802.11n ADSL2+ (VPN) Firewall Router
CD-ROM containing the online manual
RJ-11 ADSL/telephone cable
Ethernet (RJ-45) cable
PS2-RS 232 console cable
Power adapter
Three 2dBi detachable antennas
Quick Start Guide
Splitter / Micro-filter (optional)
5
Device Description
The Front LEDs
1
2
3 USB
4
5
6
7
8 DSL
9
LED
Power
Ethernet
1x - 4x
(RJ-45 connector)
Wireless
Phone 1x-2x
(RJ-11 connector)
Line
(Router with
LINE
VoIP 1x-2x
(RJ-11 connector)
Internet
Meaning
Lit orange when power is ON.
Lit green when the device is ready.
Lit red means system failure. Restart the device or contact service
provider for support.
Lit when one of the LAN ports is connected to an Ethernet device.
Lit green when transmission rate hits 1000Mbps,
Lit orange when it hits 100Mbps but no light for 10Mbps.
Flash when data is being Transmitted / Received.
Lit green when the router is connected to a USB device.
Flash when data is received / transmitted.
Lit green when a wireless connection is established.
Flash when the device is sending/receiving data.
Flash once per second while Wi-Fi protected setup is in progress.
Lit green when phone is off hook.
Lit green when the inbound and outbound calls are transmitted
through PSTN.
Lit green when phone 1 has registered successfully.
Lit orange when phone 2 has registered successfully.
If both phone 1 & 2 have succeeded in registration, both green and
orange LEDs will lit together.
Lit Green when the device is successfully connected to an ADSL
DSLAM. (“line sync”).
Lit green when IP connected.
Flash green when IP connected and IP traffic is passing through the
device.
Lit red when device attempted to become IP connected and failed.
Lit off when device in bridged mode or ADSL connection not present.
6
The Rear Ports
1 Antenna
2 DSL
Line
3
(Router with LINE port only)
Phone
4
1x - 2x (RJ-11 connector)
5 Console Port
6 USB
Giga Ethernet 1x - 4x
7
(RJ-45 connector)
8 WPS
9
RESET
Port
Meaning
Connect the detachable antenna to this port.
Connect this port to the ADSL/telephone network with the RJ-
11 cable (telephone) provided.
Connect this port to the telephone jack on the wall with RJ-11
cable.
Connect this port to an analog phone set with RJ-11 cable.
Plug in the console cable provided.
Connect the USB cable to this port.
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of
the LAN ports when connecting to a PC or an office/home
network of 10Mbps, 100Mbps or 1000Mbps.
Push WPS button to trigger Wi-Fi Protected Setup function.
To be sure the device is being turned on press RESET button
for:
1-3 seconds: quick reset the device.
6 seconds and above, power off, power on the device: restore
to factory default settings. (Cannot login to the router or forgot
your Username/Password. Press the button for more than 6
seconds).
Caution: After pressing the RESET button for more than
6 seconds, to be sure you power cycle the device again.
10 Power
11 Power Switch
Connect it with the supplied power adapter.
Power ON/OFF switch.
7
Cabling
One of the most common causes of problem is bad cabling or ADSL line(s). Make sure that all
connected devices are turned on. On the front panel of your router is a bank of LEDs. Verify that the
LAN Link and ADSL line LEDs are lit. If they are not, verify if you are using the proper cables.
Make sure that all devices (e.g. telephones, fax machines, analogue modems) connected to the same
telephone line as your router have a line filter connected between them and the wall outlet (unless
you are using a Central Splitter or Central Filter installed by a qualified and licensed electrician), and
that all line filters are correctly installed in a right way. If line filter is not installed and connected
properly, it may cause problem to your ADSL connection or may result in frequent disconnections.
8
Chapter 3: Basic Installation
The router can be configured through your web browser. A web browser is included as a standard
application in the following operating systems: Linux, Mac OS, Windows 98/NT/2000/XP/Me/Vista,
etc. The product provides an easy and user-friendly interface for configuration.
Please check your PC network components. The TCP/IP protocol stack and Ethernet network
adapter must be installed. If not, please refer to your Windows-related or other operating system
manuals.
There are ways to connect the router, either through an external repeater hub or connect directly to
your PCs. However, make sure that your PCs have an Ethernet interface installed properly prior to
connecting the router device. You ought to configure your PCs to obtain an IP address through a
DHCP server or a fixed IP address that must be in the same subnet as the router. The default IP
address of the router is 192.168.1.254 and the subnet mask is 255.255.255.0 (i.e. any attached PC
must be in the same subnet, and have an IP address in the range of 192.168.1.1 to 192.168.1.253).
The best and easiest way is to configure the PC to get an IP address automatically from the router
using DHCP. If you encounter any problem accessing the router web interface it is advisable to
uninstall your firewall program on your PCs, as they can cause problems accessing the IP address
of the router. Users should make their own decisions on what is best to protect their network.
Please follow the following steps to configure your PC network environment.
9
Connecting Your Router
1. Connect this router to a LAN (Local Area Network) and the ADSL/telephone
(ADSL) net work.
2. Power on the device.
3. Make sure the Power LED lit steadily and that the LAN LED is lit.
4. Connect your router to the telephone jack on the wall with RJ-11 cable.
5. Connect the USB 2.0 cable.
10
Network Configuration
Configuring PC in windows 7
1. Go to Start. Click on Control Panel.
Then click on Network and Internet.
2. When the Network and Sharing
Center window pops up, select and click
on Change adapter settings on the left
window panel.
3. Select the Local Area Connection,
and right click the icon to select
Properties.
11
4. Select Internet Protocol Version 4
(TCP/IPv4), then click Properties.
5. In the TCP/IPv4 properties window,
select the Obtain an IP address
automatically and Obtain DNS
Server address automatically radio
buttons. Then click OK to exit the
setting.
6. Click OK again in the Local Area
Connection Properties window to
apply the new configuration.
12
Configuring PC in Windows Vista
1. Go to Start. Click on Network.
2. Then click on Network and Sharing
Center at the top bar.
3. When the Network and Sharing
Center window pops up, select and
click on Manage network
connections on the left window
column.
4. Select the Local Area Connection,
and right click the icon to select
Properties.
13
5. Select Internet Protocol Versio4
(TCP/IPv4) then click Properties.
6. In the TCP/IPv4 properties window,
select the Obtain an IP address
automatically and Obtain DNS
Server address automatically
radio buttons. Then click OK to exit
the setting.
7. Click OK again in the Local Area
Connection Properties window to
apply the new configuration.
14
Configuring PC in Windows XP
1. Go to Start > Control Panel (in
Classic View). In the Control Panel,
double-click on Network Connections.
2. Double-click Local Area Connection.
3. In the Local Area Connection Status
window, click Properties.
4. Select Internet Protocol (TCP/IP) and
click Properties.
5. Select the Obtain an IP address
automatically and the Obtain DNS
server address automatically radio
buttons.
6. Click OK to finish the configuration.
15
Configuring PC in Windows 2000
1. Go to Start > Settings > Control Panel.
In the Control Panel, double-click on
Network and Dial-up Connections.
2. Double-click Local Area Connection.
3. In the Local Area Connection Status
window click Properties.
4. Select Internet Protocol (TCP/IP) and
click Properties.
5. Select the Obtain an IP address
automatically and the Obtain DNS
server address automatically radio
buttons.
6. Click OK to finish the configuration.
16
Configuring PC in Windows 95/98/Me
1. Go to Start > Settings > Control Panel.
In the Control Panel, double-click on
Network and choose the
Configuration tab.
2. Select TCP/IP > NE2000 Compatible,
or the name of your Network
Interface Card (NIC) in your PC.
3. Select the Obtain an IP address
automatically radio button.
4. Then select the DNS Configuration tab.
5. Select the Disable DNS radio button
and click OK to finish the configuration.
17
Configuring PC in Windows NT4.0
1. Go to Start > Settings > Control Panel.
In the Control Panel, double-click on
Network and choose the Protocols tab.
2. Select TCP/IP Protocol and click
Properties.
3. Select the Obtain an IP address from
a DHCP server radio button and click
OK.
18
Factory Default Settings
Before configuring your router, you need to know the following default settings.
Web Interface (Username and Password)
Username: admin
Password: admin
The default username and password are “admin” and “admin” respectively.
Device LAN IP settings
IP Address: 192.168.1.254
Subnet Mask: 255.255.255.0
ISP setting in WAN site
PPPoE
DHCP server
DHCP server is enabled.
Start IP Address: 192.168.1.100
IP pool counts: 100
LAN and WAN Port Addresses
The parameters of LAN and WAN ports are pre-set in the factory. The default values are shown in
the table.
IP address
Subnet Mask
DHCP server function
IP addresses for
distribution to PCs
LAN Port
192.168.1.254
255.255.255.0
Enabled
100 IP addresses continuing
from 192.168.1.100 through
192.168.1.199
WAN Port
The PPPoE function is
enabled to automatically get
the WAN port configuration
from the ISP.
19
Information from your ISP
Before configuring this device, you have to check with your ISP (Internet Service Provider) to find
out what kind of service is provided such as DHCP (Obtain an IP Address Automatically, Static IP
(Fixed IP Address) or PPPoE.
Gather the information as illustrated in the following table and keep it for reference.
PPPoE(RFC2516)
VPI/VCI, VC / LLC-based multiplexing, Username, Password, Service
Name, and Domain Name System (DNS) IP address (it can be
automatically assigned by your ISP when you connect or be set manually).
PPPoA(RFC2364)
MPoA(RFC1483/
RFC2684)
IPoA(RFC1577)
Pure Bridge
VPI/VCI, VC / LLC-based multiplexing, Username, Password and
Domain Name System (DNS) IP address (it can be automatically
assigned by your ISP when you connect or be set manually).
VPI/VCI, VC / LLC-based multiplexing, IP address, Subnet mask,
Gateway address, and Domain Name System (DNS) IP address (it is a
fixed IP address).
VPI/VCI, VC / LLC-based multiplexing, IP address, Subnet mask,
Gateway address, and Domain Name System (DNS) IP address (it is a
fixed IP address).
VPI/VCI, VC / LLC-based multiplexing to use Bridged Mode.
20
Configuring with your Web Browser
Open your web browser, enter the IP address of your router, which by default is 192.168.1.254,
and click “Go”, a user name and password window prompt will appear. The default username and
password are “admin” and “admin” respectively. (See Figure 3.14)
Figure 3.14: User name & Password Prompt Window
Congratulations! You are now successfully logon to the 3G/VoIP/802.11n ADSL2+ (VPN)
Firewall Router!
21
Chapter 4: Configuration
At the configuration homepage, the left navigation column provides you the link to each configuration
page. The category of each configuration page is listed as below.
Status
ADSL Table
3G Status
EWAN Status
iBurst Status
ARP Table
DHCP Table
Routing Table
NAT Sessions
UPnP Portmap
PPTP Status
IPSec Status
L2TP Status
VoIP Status
VoIP Call Log
Event Log
Error Log
Diagnostic
Quick Start
Configuration
LAN
WAN
System
Firewall
VPN
VoIP
QoS
Virtual Server
Wake on LAN
Time Schedule
Advanced
Language (provides user interface in English and French languages)
22
Status
ADSL Status
This section displays the ADSL overall status, which shows a number of helpful information such
as DSP firmware version.
23
3G Status
This section displays the 3G Card’s overall status, which shows you a number of helpful
information such as the current signal strength and statistics on current and total bytes transferred
and received.
Status: The current status of the 3G card.
Signal Strength: The signal strength bar indicates current 3G signal strength.
Network Name: The network name that the device is connected to.
Card Name: The name of the 3G card.
Card Firmware: The current firmware for the 3G card.
Current TX Bytes / Packets: The statistics of transmission, count for this call.
Current RX Bytes / Packets: The statistics of receive, count for this call.
Total TX Bytes / Packets: The statistics of transmission, count from system ready
Total RX Bytes / Packets: The statistics of receive, count from system ready
24
EWAN Status
Besides using 3G/ADSL to get connected to the Internet, the router offers its Ethernet port 1 as a
WAN port to be used to connect to Cable Modems and fiber optic lines. This alternative, yet faster
method to connect to the internet will provide users more flexibility to get online.
Total TX Bytes / Packets: The statistics of total data transmission in bytes / packets since system
ready.
Total RX Bytes / Packets: The statistics of total data received in bytes / packets since system ready.
25
iBurst Status
Displays additional information of the 3G status when iBurst function is enabled in the 3G
configuration such as its signal strength, card name, connection status and port class Ethernet.
Card Name: The name of the card.
Signal Strength: The signal strength bar indicates the current signal strength.
Current TX Bytes / Packets: The statistics of data transmission in bytes / packets during a call.
Current RX Bytes / Packets: The statistics of data received in bytes / packets during a call.
Total TX Bytes / Packets: The statistics of total data transmission in bytes / packets since system
ready.
Total RX Bytes / Packets: The statistics of total data received in bytes / packets since system ready.
26
Loading...