Billion BiPAC 7404VGVOX, BiPAC 7404VOX, BiPAC 7404VGPX, BiPAC 7404VPX User Manual
BiPAC 7404V(G)OX/V(G)PX
3G/VoIP/(802.11g)
ADSL2+ (VPN) Firewall Router
User Manual
Version release: 1.22 (FW: 6.24b.dm2)
Last Revised Date: July 04。2012-7-4
Table of Contents
Chapter 1: Introduction ..................................................................................................................1
Chapter 2: Installing the Router .....................................................................................................4
Package Contents ...................................................................................................................4
The Front LEDs.................................................................................................................5
The Rear Ports..................................................................................................................6
Cabling ....................................................................................................................................7
Chapter 3: Basic Installation ..........................................................................................................8
Connecting Your Router
...........................................................................................................9
Network Configuration
...........................................................................................................10
Configuring PC in windows 7
..........................................................................................10
Configuring PC in Windows Vista
....................................................................................12
Configuring PC in Windows XP
.......................................................................................14
Configuring PC in Windows 2000
....................................................................................15
Configuring PC in Windows 95/98/Me
.............................................................................16
Configuring PC in Windows NT4.0
..................................................................................17
Factory Default Settings
........................................................................................................18
Information from your ISP
......................................................................................................19
Configuring with your Web Browser ......................................................................................20
Chapter 4: Configuration.............................................................................................................. 22
Status ....................................................................................................................................23
ADSL Status....................................................................................................................23
3G Status ........................................................................................................................24
EWAN Status ..................................................................................................................25
iBurst Status....................................................................................................................26
ARP Table .......................................................................................................................26
DHCP Table..................................................................................................................... 27
Routing Table
..................................................................................................................28
NAT Sessions .................................................................................................................. 29
UPnP Portmap ................................................................................................................29
PPTP Status....................................................................................................................30
IPSec Status ...................................................................................................................31
L2TP Status.....................................................................................................................31
VoIP Status......................................................................................................................32
VoIP Call Log
...................................................................................................................32
Event Log ........................................................................................................................ 33
Error Log .........................................................................................................................34
IDS Log
...........................................................................................................................34
Diagnostic .......................................................................................................................34
Quick Start
.............................................................................................................................35
Configuration .........................................................................................................................40
LAN - Local Area Network...............................................................................................41
Bridge Interface......................................................................................................... 41
Ethernet ....................................................................................................................42
IP Alias ...................................................................................................................... 42
IPv6 Autoconfig
.........................................................................................................43
Ethernet Client Filter
.................................................................................................44
Wireless ....................................................................................................................46
Wireless Security ......................................................................................................48
Wireless Client / MAC Address Filter ........................................................................51
WPS.......................................................................................................................... 52
Port Setting ...............................................................................................................61
DHCP Server ............................................................................................................62
WAN - Wide Area Network ..............................................................................................63
WAN Interface...........................................................................................................63
WAN Profile............................................................................................................... 66
ADSL Mode............................................................................................................... 85
System ............................................................................................................................86
Time Zone.................................................................................................................86
Remote Access.........................................................................................................87
Firmware Upgrade ....................................................................................................87
Backup / Restore ......................................................................................................88
Restart Router........................................................................................................... 89
User Management ....................................................................................................90
Mail Alert ................................................................................................................... 92
Firewall and Access Control............................................................................................90
General Settings .......................................................................................................91
Packet Filter .............................................................................................................. 92
Intrusion Detection ....................................................................................................99
URL Filter................................................................................................................102
IM / P2P Blocking
....................................................................................................105
Firewall Log
.............................................................................................................106
VPN - Virtual Private Networks......................................................................................107
PPTP (Point-to-Point Tunneling Protocol) ...............................................................107
IPSec (IP Security Protocol).................................................................................... 116
L2TP (Layer Two Tunneling Protocol) .....................................................................126
VoIP - Voice over Internet Protocol ................................................................................138
SIP Device Parameters...........................................................................................139
SIP Accounts........................................................................................................... 142
Phone Port .............................................................................................................. 143
PSTN Dial Plan (Router with LINE port only).......................................................... 145
VoIP Dial Plan .........................................................................................................150
Call Feature ............................................................................................................153
Speed Dial ..............................................................................................................153
Ring & Tone ............................................................................................................154
QoS - Quality of Service................................................................................................156
Prioritization ............................................................................................................156
Outbound IP Throttling (LAN to W
AN)..................................................................... 157
Inbound IP Throttling (W
AN to LAN) .......................................................................159
Virtual Server (known as Port Forwarding)....................................................................165
Porting Forwarding
..................................................................................................166
Edit DMZ Host......................................................................................................... 168
Edit One-to-One NAT (Network Address Translation) .............................................169
Wake on LAN
................................................................................................................172
Time Schedule ..............................................................................................................173
Advanced ......................................................................................................................176
Static Route ............................................................................................................176
Static ARP...............................................................................................................177
Dynamic DNS .........................................................................................................178
Device Management ...............................................................................................179
IGMP....................................................................................................................... 183
MLD ........................................................................................................................183
VLAN Bridge
...........................................................................................................184
Logout .................................................................................................................................185
Chapter 5: Troubleshooting
........................................................................................................186
Appendix: Product Support & Contact .......................................................................................188
1
Chapter 1: Introduction
Introduction to your Router
Welcome to the 3G/VoIP/ (802.11g) ADSL2+ (VPN) Firewall Router. The router is an “all-in-one”
ADSL router, combining an ADSL modem, ADSL router and Ethernet network switch functionalities,
providing everything you need to get the machines on your network connected to the Internet over
your ADSL broadband connection. With features such as an ADSL Quick-Start wizard and DHCP
Server, you can be online in no time at all and with a minimum of fuss and configuration, catering for
first-time users to the guru requiring advanced features and control over their Internet connection
and network.
Features
Express Internet Access
The router complies with ADSL worldwide standards. It supports downstream rate up to 12/24
Mbps with ADSL2/2+, 8Mbps with ADSL. Users enjoy not only high-speed ADSL services but also
broadband multimedia applications such as interactive gaming, video streaming and real-time
audio much easier and faster than ever. It is compliant with Multi-Mode standard (ANSI T1.413,
Issue 2; G.dmt (ITU G.992.1); G.lite (ITU G.992.2); G.hs (ITU G994.1); G.dmt.bis (ITU G.992.3);
G.dmt.bis.plus (ITU G.992.5)).
3G
With 3G-based Internet connection (requires an additional 3G USB modem), user can access
internet through 3G - whether you're seated at your desk or taking a cross-country train trip.
EWAN
Besides using 3G/ADSL to get connected to the Internet, the router offers its Ethernet port 1 as a
WAN port to be used to connect to Cable Modems and fiber optic lines. This alternative, yet faster
method to connect to the internet will provide users more flexibility to get online.
Dual WAN
Dual WAN is a new way of getting connected to the internet which is to use each two of the
3G/ADSL/EWAN to deal with the unexpected case and balance traffic load. That is a way of
improving greatly the robustness.
802.11g Wireless AP with WPA Support (Wireless Router only)
With integrated 802.11g Wireless Access Point in the router, the device offers a quick and easy
access among wired network, wireless network and broadband connection (ADSL) with single
device simplicity, and as a result, mobility to the users. In addition to 54 Mbps 802.11g data rate, it
also interoperates backward with existing 802.11b equipment. The Wi-Fi Protected Access
(WPA-PSK and WPA2-PSK) and Wired Equivalent Privacy (WEP) supported features enhance the
security level of data protection and access control via Wireless LAN.
Fast Ethernet Switch
A 4-port 10/100Mbps fast Ethernet switch is built in with automatic switching between MDI and
MDI-X for 10Base-T and 100Base-TX ports. An Ethernet straight or crossover cable can be used
directly for auto detection.
2
Multi-Protocol to Establish a Connection
It supports PPPoA (RFC 2364 - PPP over ATM Adaptation Layer 5), RFC 1483 encapsulation
overATM (bridged or routed), PPP over Ethernet (RFC 2516), and IPoA (RFC1577) to establish a
connection with the ISP. The product also supports VC-based and LLC-based multiplexing.
Quick Installation Wizard
It supports a WEB GUI page to install this device quickly. With this wizard, end users can enter the
information easily which they get from their ISP, then surf the Internet immediately.
Universal Plug and Play (UPnP) and UPnP NAT Traversal
This protocol is used to enable simple and robust connectivity among stand-alone devices and
PCs from many different vendors. It makes network simple and affordable for users. UPnP
architecture leverages TCP/IP and the Web to enable seamless proximity networking in addition to
control and data transfer among networked devices. With this feature enabled, users can now
connect to Net meeting or MSN Messenger seamlessly.
Network Address Translation (NAT)
Allows multi-users to access outside resources such as the Internet simultaneously with one IP
address/one Internet access account. Many application layer gateway (ALG) are supported such
as web browser, ICQ, FTP, Telnet, E-mail, News, Net2phone, Ping, NetMeeting, IP phone and
others.
SOHO Firewall Security with DoS and SPI
Along with the built-in NAT natural firewall feature, the router also provides advanced hacker
pattern-filtering protection. It can automatically detect and block Denial of Service (DoS) attacks.
The router is built with Stateful Packet Inspection (SPI) to determine if a data packet is allowed
through the firewall to the private LAN.
Domain Name System (DNS) Relay
It provides an easy way to map the domain name (a friendly name for users such as www.yahoo.
com) and IP address. When a local machine sets its DNS server with this router’s IP address,
every DNS conversion request packet from the PC to this router will be forwarded to the real DNS
in the outside network.
Dynamic Domain Name System (DDNS)
The Dynamic DNS service allows you to alias a dynamic IP address to a static hostname. This
dynamic IP address is the WAN IP address. For example, to use the service, you must first apply
for an account from a DDNS service like http://www.dyndns.org/. More than 5 DDNS servers are
supported
Quality of Service (QoS)
QoS gives you full control over which types of outgoing data traffic should be given priority by the
router, ensuring important data like gaming packets, customer information, or management
information move through the router ay lightning speed, even under heavy load. The QoS features
are configurable by source IP address, destination IP address, protocol, and port. You can throttle
the speed at which different types of outgoing data pass through the router, to ensure P2P users
don’t saturate upload bandwidth, or office browsing doesn’t bring client web serving to a halt. In
addition, or alternatively, you can simply change the priority of different types of upload data and let
the router sort out the actual speeds.
3
Virtual Server (“port forwarding”)
Users can specify some services to be visible from outside users. The router can detect incoming
service requests and forward either a single port or a range of ports to the specific local computer
to handle it. For example, a user can assign a PC in the LAN acting as a WEB server inside and
expose it to the outside network. Outside users can browse inside web servers directly while it is
protected by NAT. A DMZ host setting is also provided to a local computer exposed to the outside
network, Internet.
Rich Packet Filtering
Not only filters the packet based on IP address, but also based on Port numbers. It will filter
packets from and to the Internet, and also provides a higher level of security control.
Dynamic Host Configuration Protocol (DHCP) Client and Server
In the WAN site, the DHCP client can get an IP address from the Internet Service Provider (ISP)
automatically. In the LAN site, the DHCP server can allocate a range of client IP addresses and
distribute them including IP address, subnet mask as well as DNS IP address to local computers. It
provides an easy way to manage the local IP network.
Static and RIP1/2 Routing
It has routing capability and supports easy static routing table or RIP1/2 routing protocol.
Simple Network Management Protocol (SNMP)
It is an easy way to remotely manage the router via SNMP.
Web based GUI
It supports web based GUI for configuration and management. It is user-friendly and comes with
on-line help. It also supports remote management capability for remote users to configure and
manage this product.
Firmware Upgradeable
Device can be upgraded to the latest firmware through the WEB based GUI.
Rich Management Interfaces
It supports flexible management interfaces with local console port, LAN port, and WAN port. Users
can use terminal applications through the console port to configure and manage the device, or
Telnet, WEB GUI, and SNMP through LAN or WAN ports to configure and manage the device.
Virtual Private Network (VPN) (BiPAC 7404V(G)OX only)
It allows user to make a tunnel with a remote site directly to secure the data transmission among
the connection. User can use embedded PPTP and L2TP client/server, IKE and IPSec which are
supported by this router to make a VPN connection or users can run the PPTP client in PC and the
router already provides IPSec and PPTP pass through function to establish a VPN connection if
the user likes to run the PPTP client in his local computer.
4
Chapter 2: Installing the Router
Important note for using this router
Package Contents
3G/VoIP/(802.11g) ADSL2+ (VPN) Firewall Router
CD-ROM containing the online manual
RJ-11 ADSL/telephone Cable
Ethernet (CAT-5) Cable
Console kit
Power adapter
A detachable antenna
Quick Start Guide
5
The Front LEDs
LED
Meaning
1 Power
Both red and green LEDs lit together when power is ON.
Lit red means system failure. Restart the device or contact support.
Lit green when the device is ready.
2
Ethernet Port
1X - 4X
(RJ-45 connector)
Lit when one of LAN ports is connected to an Ethernet device.
Lit green when the speed of transmission hits 100Mbps; Lit orange
when the speed of transmission hits 10Mbps.
Blink when data is being Transmitted / Received.
3 USB
Lit when the router is connected to a USB device.
Flash when data is received / transmitted.
4
Wireless
Lit green when a wireless connection is established.
Flash when the device is sending/receiving data.
Flash once per second while Wi-Fi protected setup is in progress.
5
Phone 1x-2x
(RJ-11 connector)
Lit green when phone is off hook.
6
Line
(Router with LINE
port only)
Lit when the inbound and outbound calls are transmitted through
PSTN.
7
VoIP 1x-2x
(RJ-11 connector)
Lit green when phone 1 has registered successfully.
Lit orange when phone 2 has registered successfully.
If both phone 1 & 2 have succeeded in registration, both green and
orange LEDs will lit together.
8 DSL
Lit Green when the device is successfully connected to an ADSL
DSLAM. (“line sync”).
9 Internet
Lit red when WAN port fails to get IP address.
Lit green when WAN port gets IP address successfully.
Lit off when the device is in bridge mode or when WAN connection is
absent.
6
The Rear Ports
Port
Meaning
1
Antenna
(Wireless Router only)
Connect the detachable antenna to this port.
2 DSL
Connect this port to the ADSL/telephone network with the RJ-
11 cable (telephone) provided.
3
Line
(Router with LINE port only)
Connect this port to the telephone jack on the wall with RJ-11
cable.
4
Phone
1X-2X (RJ-11 connector)
Connect this port to an analog phone set with RJ-11 cable.
5 USB
Connect the USB cable to this port.
6
Ethernet
1X - 4X
(RJ-45 connector)
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of
the LAN ports when connecting to a PC or an office/home
network of 10Mbps or 100Mbps.
Caution: Port 4 can be either a LAN or Console port at a
time but not both.
7 WPS
Push WPS button for less than 5 sec to trigger Wi-Fi Protected
Setup function; push WPS button for more than 5 sec to
enable/disable WLAN Service.
8
RESET
To be sure the device is being turned on press RESET button
for:
1-3 seconds: quick reset the device.
6 seconds and above, power off, power on the device: restore
to factory default settings. (Cannot login to the router or forgot
your Username/Password. Press the button for more than 6
seconds).
Caution: After pressing the RESET button for more than
6 seconds, to be sure you power cycle the device again.
9 Power
Connect it with the supplied power adapter.
10 Power Switch
Power ON/OFF switch
7
Cabling
One of the most common causes of problem is bad cabling or ADSL line(s). Make sure that all
connected devices are turned on. On the front panel of your router is a bank of LEDs. Verify that the
LAN Link and ADSL line LEDs are lit. If they are not, verify if you are using the proper cables.
Make sure that all devices (e.g. telephones, fax machines, analogue modems) connected to the same
telephone line as your router have a line filter connected between them and the wall outlet (unless
you are using a Central Splitter or Central Filter installed by a qualified and licensed electrician),
and that all line filters are correctly installed in a right way. If line filter is not installed and connected
properly, it may cause problem to your ADSL connection or may result in frequent disconnections.
8
Chapter 3: Basic Installation
The router can be configured through your web browser. A web browser is included as a standard
application in the following operating systems: Linux, Mac OS, Windows 7/
98/NT/2000/XP/Me/Vista, etc. The product provides an easy and user-friendly interface for
configuration.
Please check your PC network components. The TCP/IP protocol stack and Ethernet network
adapter must be installed. If not, please refer to your Windows-related or other operating system
manuals.
There are ways to connect the router, either through an external repeater hub or connect directly
to your PCs. However, make sure that your PCs have an Ethernet interface installed properly prior
to connecting the router device. You ought to configure your PCs to obtain an IP address through
a DHCP server or a fixed IP address that must be in the same subnet as the router. The default IP
address of the router is 192.168.1.254 and the subnet mask is 255.255.255.0 (i.e. any attached PC
must be in the same subnet, and have an IP address in the range of 192.168.1.1 to 192.168.1.253).
The best and easiest way is to configure the PC to get an IP address automatically from the router
using DHCP. If you encounter any problem accessing the router web interface it is advisable to
uninstall your firewall program on your PCs, as they can cause problems accessing the IP address
of the router. Users should make their own decisions on what is best to protect their network.
Please follow the following steps to configure your PC network environment.
9
Connecting Your Router
1. Connect this router to a LAN (Local Area Network) and the ADSL/telephone (ADSL)
network.
2. Power on the device.
3. Make sure the Power LED lit steadily and that the LAN LED is lit.
4. Connect your router to the telephone jack on the wall with RJ-11 cable.
5. Connect the USB 2.0 cable.
10
Network Configuration
Configuring PC in windows 7
Then click on Network and Internet.
2. When the Network and Sharing Center
window pops up, select and click on
Change adapter settings on the left
window panel.
3. Select the Local Area Connection,
and right click the icon to select Properties.
1. Go to Start. Click on Control Panel.
11
4. Select Internet Protocol Version 4
(TCP/IPv4) then click Properties.
5. In the TCP/IPv4 properties window,
select the Obtain an IP address automatically
and Obtain DNS Server address automatically
radio buttons. Then click OK to exit the setting.
6. Click OK again in the Local Area Connection
Properties window to apply the new
configuration.
12
Configuring PC in Windows Vista
1. Go to Start. Click on Network.
2. Then click on Network and Sharing
Center at the top bar.
3. When the Network and Sharing
Center window pops up, select and
click on Manage network
connections on the left window
column.
4. Select the Local Area Connection,
and right click the icon to select
Properties.
13
5. Select Internet Protocol Version 4
(TCP/IPv4) then click Properties.
6. In the TCP/IPv4 properties window,
select the Obtain an IP address
automatically and Obtain DNS
Server address automatically radio
buttons. Then click OK to exit the
setting.
7. Click OK again in the Local Area
Connection Properties window to
apply the new configuration.
14
Configuring PC in Windows XP
1. Go to Start > Control Panel (in Classic
View). In the Control Panel, double-click
on Network Connections.
2. Double-click Local Area Connection.
3. In the Local Area Connection Status
window, click Properties.
4. Select Internet Protocol (TCP/IP) and
click Properties.
5. Select the Obtain an IP address
automatically and the Obtain DNS
server address automatically radio
buttons.
6. Click OK to finish the configuration.
15
Configuring PC in Windows 2000
1. Go to Start > Settings > Control Panel.
In the Control Panel, double-click on
Network and Dial-up Connections.
2. Double-click Local Area Connection.
3. In the Local Area Connection Status
window click Properties.
4. Select Internet Protocol (TCP/IP) and
click Properties.
5. Select the Obtain an IP address
automatically and the Obtain DNS
server address automatically radio
buttons.
6. Click OK to finish the configuration.
16
Configuring PC in Windows 95/98/Me
1. Go to Start > Settings > Control Panel.
In the Control Panel, double-click on
Network and choose the Configuration
tab.
2. Select TCP/IP > NE2000 Compatible,
or the name of your Network Interface
Card (NIC) in your PC.
3. Select the Obtain an IP address
automatically radio button.
4. Then select the DNS Configuration tab.
5. Select the Disable DNS radio button
and click OK to finish the configuration.
17
Configuring PC in Windows NT4.0
1. Go to Start > Settings > Control Panel.
In the Control Panel, double-click on
Network and choose the Protocols tab.
2. Select TCP/IP Protocol and click
Properties.
3. Select the Obtain an IP address from
a DHCP server radio button and click
OK.
18
Factory Default Settings
Before configuring your router, you need to know the following default settings.
Web Interface (Username and Password)
Username: admin
Password: admin
The default username and password are “admin” and “admin” respectively.
Device LAN IP settings
IP Address: 192.168.1.254
Subnet Mask: 255.255.255.0
ISP setting in WAN site
PPPoE
DHCP server
DHCP server is enabled.
Start IP Address: 192.168.1.100
IP pool counts: 100
LAN and WAN Port Addresses
The parameters of LAN and WAN ports are pre-set in the factory. The default values are shown in
the table.
LAN Port
WAN Port
IP address
192.168.1.254
Subnet Mask
255.255.255.0
DHCP server function
Enabled
IP addresses for
distribution to PCs
100 IP addresses continuing
from 192.168.1.100 through
192.168.1.199
The PPPoE function is
enabled to automatically get
the WAN port configuration
from the ISP.
19
Information from your ISP
Before configuring this device, you have to check with your ISP (Internet Service Provider) to find
out what kind of service is provided such as DHCP (Obtain an IP Address Automatically, Static IP
(Fixed IP Address) or PPPoE.
Gather the information as illustrated in the following table and keep it for reference.
PPPoE(RFC2516)
VPI/VCI, VC / LLC-based multiplexing, Username, Password, Service
Name, and Domain Name System (DNS) IP address (it can be
automatically assigned by your ISP when you connect or be set manually).
PPPoA(RFC2364)
VPI/VCI, VC / LLC-based multiplexing, Username, Password and
Domain Name System (DNS) IP address (it can be automatically
assigned by your ISP when you connect or be set manually).
MPoA(RFC1483/
RFC2684)
VPI/VCI, VC / LLC-based multiplexing, IP address, Subnet mask,
Gateway address, and Domain Name System (DNS) IP address (it is a
fixed IP address).
IPoA(RFC1577)
VPI/VCI, VC / LLC-based multiplexing, IP address, Subnet mask,
Gateway address, and Domain Name System (DNS) IP address (it is a
fixed IP address).
Pure Bridge
VPI/VCI, VC / LLC-based multiplexing to use Bridged Mode.
20
Configuring with your Web Browser
Open your web browser, enter the IP address of your router, which by default is 192.168.1.254,
and click “Go”, a user name and password window prompt will appear. The default username and
password are “admin” and “admin” respectively. (See Figure 3.14)
Figure 3.14: User name & Password Prompt Window
Congratulations! You are now successfully logon to the 3G/VoIP/(802.11g) ADSL2+ (VPN)
Firewall Router!
22
Chapter 4: Configuration
At the configuration homepage, the left navigation column provides you the link to each configuration
page. The category of each configuration page is listed as below.
Status
ADSL Table
3G Status
EWAN Status
iBurst Status
ARP Table
DHCP Table
Routing Table
NAT Sessions
UPnP Portmap
PPTP Status
IPSec Status
L2TP Status
VoIP Status
VoIP Call Log
Event Log
Error Log
IDS Log
Diagnostic
Quick Start
LAN
WAN
Configuration
System
Firewall
VPN
VoIP
QoS
Virtual Server
Wake on LAN
Time Schedule
Advanced
Language (provides user interface in English and French languages)
23
Status
ADSL Status
This section displays the ADSL overall status, which shows a number of helpful information such
as DSP firmware version.
24
3G Status
This section displays the 3G Card’s overall status, which shows you a number of helpful
information such as the current signal strength and statistics on current and total bytes transferred
and received.
Status: The current status of the 3G card.
Signal Strength: The signal strength bar indicates current 3G signal strength.
Network Name: The network name that the device is connected to.
Card Name: The name of the 3G card.
Card Firmware: The current firmware for the 3G card.
Card IMEI: the IMEI (International Mobile Equipment Identity) of the 3G card.
Current TX Bytes / Packets: The statistics of transmission, count for this call.
Current RX Bytes / Packets: The statistics of receive, count for this call.
Total TX Bytes / Packets: The statistics of transmission, count from system ready
Total RX Bytes / Packets: The statistics of receive, count from system ready
Current Connection Time: The duration for the current connection.
Total Connection Time: The cumulative connection time.
25
Amount used: Show the traffic or hours has been used.
Billing period: The day from which the fee is charged.
Note: Only after you have checked to enable Usage Allowance
, the following information will be
shown.
EWAN Status
Besides using 3G/ADSL to get connected to the Internet, the router offers its Ethernet port 1 as a
WAN port to be used to connect to Cable Modems and fiber optic lines. This alternative, yet faster
method to connect to the internet will provide users more flexibility to get online.
Total TX Bytes / Packets: The statistics of total data transmission in bytes / packets since system
ready.
Total RX Bytes / Packets: The statistics of total data received in bytes / packets since system
ready.
26
iBurst Status
Displays additional information of the 3G status when iBurst function is enabled in the 3G
configuration such as its signal strength, card name, connection status and port class Ethernet.
ARP Table
This section displays the router’s ARP (Address Resolution Protocol) Table, which shows the
mapping of Internet (IP) addresses to Ethernet (MAC) addresses. This is useful as a quick way of
determining the MAC address of the network interface of your PCs to use with the router’s Firewall
– MAC Address Filter function. See the Firewall section of this manual for more information on this
feature.
IP Address: A list of IP addresses of devices on your LAN (Local Area Network).
MAC Address: The MAC (Media Access Control) addresses for each device on your LAN.
Interface: The interface name (on the router) that this IP Address connects to.
Static: Static status of the ARP table entry:
“no” for dynamically-generated ARP table entries.
“yes” for static ARP table entries added by the user.
27
DHCP Table
Leased: The DHCP assigned IP addresses information.
Expired: The expired IP addresses information.
Permanent: The fixed host mapping information.
Leased Table
IP Address: The IP address that assigned to client.
MAC Address: The MAC address of client.
Client Host Name: The Host Name (Computer Name) of client.
Expiry: The current lease time of client.
28
Routing Table
Routing Table
Valid: It indicates a successful routing status.
Destination: The IP address of the destination network.
Netmask: The destination Netmask address.
Gateway/Interface: The IP address of the gateway or existing interface that this route will use.
Cost: The number of hops counted as the cost of the route.
RIP Routing Table
Destination: The IP address of the destination network.
Netmask: The destination Netmask address.
Gateway: The IP address of the gateway that this route will use.
Cost: The number of hops counted as the cost of the route.
Loading...