B-3000 Sparkling Specification Sheet
The B-3000 Sparkling system is a filtered chilled & sparkling water system which provides
chilled and
The inj
the water which means
Adjust the level of sparkling to suit your taste. With adjustable controls up to 5 bar of CO2
pressure, this offers the world’s best carbon
A simple adjustable control knob allows the chilled water temperature t
lowered to 6˚
quickly reached and maintained
The spar
it reduces the growth of harmful bacteria.
& sparkling
justable chilled temperature
professional sparkling water instantly. It delivers the following benefits:
professional sparkling
ection system used in the B-3000 Sparkling units ensures the saturation of CO2 is high in
it has a better life and consequently, taste.
sparkling water
C for perfectly chilled, refreshing drinks, with your required temperature being
.
turbo clean
kling system is a silver Ion (Au+) system which improves the hygiene levels in the unit as
filtered drinking
water.
ation system.
o be raised to 15˚C or
B-3000 Sparkling Specification Sheet
Specifications and guide to standard model selection
-3000 Sparkling Family use
A single 15mm (1/2”) stop-tap with a
male thread + position. Water supply
must be microbiologically safe to drink,
with a minimum dynamic water pressure
of 250kPa to a maximum of 1200kPa.
Electrical installation requirements
The B-3000 Sparkling requires a
standard 10 amp power outlet. It is
supplied with a 1 metre flex cord and
plug.
CO2 Gas Cylinder
The CO2 gas cylinder supplied must be
secured in a suitable location. Each
cylinder contains 600g of CO2 and should
be installed in a well ventilated area.
Each cylinder will provide between 200350L of sparkling water depending on
the unit settings. The MSDS is available
on www.billi.com.au
for a complete list of
specifications and warnings.
Replacements are available.
Warranty
The Sparkling range is covered by a
comprehensive 2 year warranty on all
parts and labour.
Technical Advice
Contact Billi Pty Ltd on 1800 812 321
of persons
Billi have partnered with globally
recognised brand Pentair Everpure to
create the most technologically
advanced filtration for instant boiling and
chilled filtered water systems. It
removes sediment and chemicals, allows
the flow of minerals through without
scale build up and suppresses harmful
bacteria in the water. Due to the unique
Fibredyne™ technology, our filters have
a longer life, higher flow rate and lower
pressure drop, leaving you with healthy
fresh water. All Billi cartridges are
certified by global public safety agency
NSF International. Filter changes are
made simple by our swing-change
system and replacement cartridges are
available online at www.billi.com.au
Optional sub micron filters are available.
Options and accessories
Dispenser Styles: The B-3000 Sparkling
is supplied with a slimline dispenser.
Dispenser Finishes: Standard finish for
the Dispenser is Bright Chrome.
Billi Font: Allows the dispenser to be
located away from sink areas.
Tubing Extension Kit: Allows the
dispenser to be offset from the under
bench unit.
85 240
(mm)
Width (mm)
(mm)
Every Billi drinking water appliance is
manufactured under a certified quality
control system. The B-3000 Sparkling
models have been tested and complies
with all required standards including:
Watermark Licence; Tested to; AS3498
and AS/NZS4020; Victorian Electrical
Safety Act 1998 Approval, AS/NZS ISO
9002; AS1428 Accessibility Design
Requirements; Section J6 of the BCA;
Certificate Number QEC 11627.
Install Diagram
.
Billi Pty Ltd
42 Lucknow Crescent, Thomastown
Victoria, 3074 Australia
Telephone + 613 9469 0400
Facsimile + 613 9469 0499
Website www.billi.com.au
Designed and manufactured in Australia
As Billi Pty Ltd has a policy of continual
improvement, all details are subject to change
All goods sold are subject to our standard
terms and conditions. 1016