
B-5000 Sparkling Specification Sheet
the ultimate drinking water appliances which deliver boiling,
chilled & sparkling filtered water instantly. They deliver the following benefits:
in the water
is high which means it has a better life and, consequently, taste.
Adjustable chilled temperature
The new Billi sparkling models have an improved
A simple
adjustable control knob allows the chilled water temperature to be
refreshing drinks
Our Ice bank technology has a chilled reservoir where both sparkling and chilled water supply passes
through. In doing so, the dispensed water temperature is consistently chilled
Billi’s SplashFree boiling water delivery electronically varies the water flow, slowing momentarily to
eliminate splashing as the water first enters the cup. All Billi dispensers are supplied standard with
a safety switch.
cup capacity from 60 cups to 100 cups & 120
cups to 200 cups
XL Levered on font in Chrome
Billi Sparkling systems are
aturated sparkling system
injection system used in the Billi Sparkling range ensures the saturation of CO
2
sparkling water
sparkling to suit your taste with adjustable controls up to 5 bar of CO2 pressure.
.
Bank technology for chilled and sparkling water
l of carbonation.
, increased chilled & sparkling
.
canister.
2
chilled & sparkling
filtered water
chilling capacity & recovery time.
raised or lowered for chilled and
, also providing
2

B-5000 Sparkling Specification Sheet
Chilled &
sparkling
cups / hour
Please note:
dispenser
http://billi.com.au/wp
Electrical installation requirements
Accessibility Design Requirements;
Preferred installation layout
XL Levered tap dimensions
1 cup = 17 0ml. Based on the initial number of cups of
Specifications and guide to standard model selection
0LCH B-5000 Sparkling
The BCS Sparkling consists of two modules, the Chilled and Sparkling (C&S) module, and the Boiling module. All Models come in a range of
options and finishes. The code shown on this table is for XL Dispenser in Chrome only. You can view the options and Product Codes here:
-content/uploads/2016/06/Aqua-Genius-Selection-Guide_0516.pdf
The Billi Boiling, Chilled & Sparkling consists
of two modules and both require their own
standard AU 10 amp power outlet. Unit is
supplied with a 1 metre flex cord and plug.
Water supply
A single 15mm (1/2”) BSP stop-tap with a
male thread should be installed in an easily
accessible position. Water supply must be
microbiologically safe to drink, with a
minimum dynamic water pressure of
250kPa to a maximum of 1000kPa.
CO
Gas Cylinder
2
The CO
gas cylinder supplied must be
2
secured in a suitable location. Each cylinder
contains 1100g of CO
installed in a well ventilated area. Each
and should be
2
cylinder will provide between 200-350L of
sparkling water depending on the unit
settings. The MSDS is available on
www.billi.com.au
for a complete list of
specifications and warnings. Replacement
gas cylinders are available from Billi.
Warranty
All components of the Billi units are
covered by a 24 month warranty. Filter
cartridges are a consumable and are not
covered by warranty, as water conditions
and usage vary.
Technical Advice
Contact Billi Pty Ltd on 1800 812 321
Refer to installation guide for full details
including ventilation requirements.
no. of
persons
2 x 10
Billi have partnered with globally
recognised brand Pentair Everpure to
create the most technologically advanced
filtration for instant boiling and chilled
filtered water systems. It removes
sediment and chemicals, allows the flow
of minerals through without scale build up
and suppresses harmful bacteria in the
water. Due to the unique Fibredyne™
technology, our filters have a longer life,
higher flow rate and lower pressure drop,
leaving you with healthy fresh water. All
Billi cartridges are certified by NSF
International.
Filter changes are made simple by our
swing-change system and replacement
cartridges are available online at
www.billi.com.au
. Optional sub micron
filters are available.
Certifications
Every Billi drinking water appliance is
manufactured under a certified quality
control system. Billi Sparkling models
have been tested and comply with all
required standards including: Watermark;
License Number 022690; Tested to;
ATS5200.105 and AS/NZS4020; AS1428
ISO9001 Certificate Number QEC 11627.
boiling water immediately available, drawn one cup
every 10 seconds. Consideration may be needed for
usage patterns and draw-off methods.
Billi Pty Ltd
42 Lucknow Crescent, Thomastown
Victoria, 3074 Australia
Telephone + 613 9469 0400
Facsimile + 613 9469 0499
Website www.billi.com.au
Designed and manufactured in Australia
As Billi Pty Ltd has a policy of continual
improvement, all details are subject to change
without notice.
All goods sold are subject to our standard
terms and conditions. 0217