E. SPECIFICTIONS
1 INPUT CHANNELS
Input Mode Electronically balbanced,1/4 jack or XLR MIC input.
MIC E.I.N -120dB
T H D 0.01%(+4dB ,1KHz.)
Gain Bandwidth 80KHz
Gain Control Range -5dB~+60dB
Max Input +22dB
Channel Fader Range -85dB~+10dB
Monitor Send Range -85dB~0dB
Effect Send Range -85dB~0dB
Hi Shelving 12KHz,+/-15dB,Q fixed at 2 OCT
Mid Shelving 350Hz-8KHz,+/-15dB Q fixed at 1 OCT
Low Shelving 120Hz.+/-15dB, Q fixed at 2 OCT
Channel Insert MAX IN/OUT +22dB
Channel to Channel Cross-talk -95dB(1KHz)
2. AUX INPUT
MAX AUX Input +22dB
MAX PLAY IN +10dB
AUX In Gain range -85dB 0dB
3. EFFECT
Max Effect SEND/RETURN +10dB
Effect Tone +/-12dB 8KHz
Effect Send Gain Range -85dB 0dB
Effect Return Gain Range -85dB 0dB
4. MONITOR OUTPUT
Max Monitor Output +22dB
Monitor Hi Shelving +/-15dB 8KHz
Monitor Low Shelving +/-15dB 120Hz
~
~
~
5. MIX ER OUTPUT
Max Output (+22dB ,Balance XLR &1/4 jack)
Dual 7 Band Graphic Equalizer 2.5 multiple frequency ,Q fixed at 10 OCT,+/-12dB
N/S -90dBr(ref:+4dB )
Distortion (THD) 0.01%,1KHz/+4dB
Frequency Response 20Hz~40KHz +/-1dB 10Hz~120KHz+/-3dB
Power Amplifier Output 2X300W/4
Page 8
OWNER'S MANUAL
TO PREVENT ELECTRIC SHOCK DO NOT REMOVE COVER
OR BACK. NO USER SERVICEABLE PARTS INSIDE REFERS
SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION! Do not locate sensitive high-gain equipment
such as preamplifiers or tape decks directly above or below
the unit. Because this amplifier has a high power density,
it has a strong magnetic field, which can induce hum into
unshielded devices that are located nearby. The field is
strongest just above and below the unit.
If an equipment rack is used, we recommend locating the
amplifier(s) in the bottom of the rack and the preamplifier
or other sensitive equipment at the top.
MAGNETIC FIELD
WARNING
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT EXPOSE THIS
EQUIPMENT TO RAIN OR MOISTURE!
WATCH FOR THESE SYMBOLS:
The lightning bolt triangle
is used to alert the user to risk
of electric shock
The exclamation point triangle is used
to alert the user to important operating or
maintenance instructions.
The information furnished in this manual does not include all of the details of design, production, or
variations of the equipment, Not does it cover every possible situation that may arise during installation,
operation or maintenance. If you need special assistance beyond the scope of this manual, please contact
our Technical Support Group.
24-bit - AD/DA converters with 64/128 times over-sampling for ultra-high headroom and resoluiton
8 kind of effect mode (HALL1 HALL2 ROOM1 ROOM2 DEL1 DEL2 ECHO REV/DEL)
discretional adjust and store the delay time and repeat time
Ultra-low noise multi- channel 4-bus mixer
Master aux sends with gain control
Extremely high headroom-offering more dynamic range
Ultra-low nose discrete mic pre-amps with +48V phantom power
Balanced inputs and main outputs
Peak LED s and switchable low-cut filter on all mono channels
Ultra-musical 7-band EQ on all channels
Mute/ Alt 3-4, Solo-In-Place and Pre-Fader-Listen function on all channels
Separate main mix, control room and headphones outputs
2-Track inputs assignable to main or control room/ headphones outputs
Highly accurate bargraph meters on output
High quality 60 mm faders and sealed potentiometers
Rugged design power supply ensures superior transient response
State-of-the-art 4558 ICs and high quality components ensure crystal-clear audio performance and excellent noise figures
All of the mixer's circuit board is dual Layer PCB and the devices are SMD
19" rack mounting kit included
Ultra-low noise multi-channel digital busses mixer
Page 1
Biema AUDI CONFLUEN series
Multi-channel digital Consoles mixer
MX
EMX
R
Biema AUDI CONFLUEN series
Multi-channel digital Consoles mixer
MX
EMX
R