Biamp Tesira HD-1 Installation & Operation Manual

A: 9300 S.W. Gemini Drive Beaverton, OR 97008 USA T: +1 503.641.7287 W: www.biamp.com

MARCH 2019

Setup and Use

The Tesira software provides an intuitive interface for setup and programming
of the HD-1. The information supplied by this manual relates to physical
connections and device setup. For more details on software setup, please
consult the Tesira Help File.

All standard telephony functions, including dialing, the ability to answer and
make calls, mute, conference and redial are available from the HD-1, which
connects to a single VoIP or POTS line on a Tesira system. A second HD-1
cannot be assigned to a telephony line that’s already being controlled by
another HD-1.

Installation

Install the unit away from heat sources, such as vents and radiators, and in
rooms with adequate ventilation. Ensure that air can circulate freely around
the unit. Do not exceed the maximum ambient operating temperature of 32°­104° F (0° - 40°C).

Default Network Conguration

The HD-1 by default uses a link-local (Auto) IP address. This allows the device

to receive its network conguration from a DHCP server. This enables the

HD-1 to be discovered by a Tesira SERVER-IO, SERVER or TesiraFORTÉ
device that also has default IP settings.

The default HD-1 hostname is “HD-1-” followed by its serial number. The
Network settings and hostname can be edited and assigned via Device
Maintenance in the Tesira software.

Tesira software provides programming of all remote functions, network setup,
device naming, and device maintenance.

Device information such as IP, MAC address and device serial number will be

displayed on the main screen when the device is un-congured or by pushing

the Select/Device Info button on the keypad.

Tesira® HD-1 Dialer

Installation & Operation Guide

Product Description

The Tesira HD-1 is a hardware dialer for Tesira audio DSPs. The
HD-1 is compatible with Tesira SERVER and SERVER-IO with
STC-2 or SVC-2 cards installed. The HD-1 is also compatible with
the following TesiraFORTÉ models:

TesiraFORTÉ TI
TesiraFORTÉ AVB TI
TesiraFORTÉ DAN TI
TesiraFORTÉ VI
TesiraFORTÉ AVB VI
TesiraFORTÉ DAN VI

TesiraFORTÉ VT
TesiraFORTÉ AVB VT
TesiraFORTÉ DAN VT
TesiraFORTÉ AVB VT4
TesiraFORTÉ DAN VT4

A: 9300 S.W. Gemini Drive Beaverton, OR 97008 USA T: +1 503.641.7287 W: www.biamp.com

MARCH 2019

Tesira HD-1 Dialer - Keypad Functions

1. Volume Control 9. Call Appearance One

2. Mute 10. Call Appearance Two

3. LCD Display 11. Hold

4. Context (Soft) Buttons 12. O󰀨 Hook

5. Scroll Up/Down 13. On Hook

6. Select/Device Info 14. Last Number Redial

7. Numeric Keypad 15. Directory/Speed Dial

8. Conference 16. Flash

Network Connection

One Ethernet port is provided for connecting the HD-1 to the network.
The network connection should be made with CAT5, CAT5e, CAT6 or
CAT7 cabling.

This connection is made to the Ethernet port of a Tesira SERVER-IO,
SERVER or TesiraFORTÉ device, either directly (single station) or via
a network switch and carries control data over Ethernet.

PoE-enabled network switches or PoE midspan adapters (injector)
must be used to power the unit. These must be 802.3at Type 1 com­pliant. The maximum cable distance between any unit and an Ethernet
switch is 328 feet (100 meters) when using copper cabling.

Additional Ethernet switches and/or ber-optic cable can be used to

further extend distances between units on a network.

HD-1

HD-1

Non-PoE Ethernet

Switch

PoE Injector

PoE Ethernet Switch