bhi DUAL-IN-LINE Product Selection Guide

PRODUCT SELECTION BOOKLET

Removing unwanted background noise and interference from voice

and radio communication channels to leave clear audible speech

bhi Ltd design and manufacture
a range of DSP noise cancelling
products that remove unwanted

noise and interference from noisy

radio and voice communication

channels. Unwanted background

noise, white noise, hiss, hash,

plasma TV interference, computer

hash etc can be removed so that

you can hear the speech signal

much more clearly, enabling you

to listen stress free!

2

Proudly serving the following markets:

MilitaryCommercial MedicalAmateur

bhi DSP noise cancelling technology operates in the frequency domain and the
software algorithm recognises human speech. The system works out whether the
received signal has speech or noise characteristics. The typical range of human
voice modulation is around 0.6 to 6Hz.

The pass-band of the bhi DSP technology is subdivided into sub-bands, and if the
signal has noise characteristics, the noise portion is removed from this sub-band.

The speech then passes through with the noise removed (depending on the lter level

setting). If no noise is present the speech remains unchanged (try it with a clear FM
signal). A technique called “spectral diffusion” is used to minimise the phenomenon of

“musical tones” that you can nd with other DSP technologies for most lter settings.

How does bhi DSP Noise Cancelling Technology work?

3

There is almost no distortion of the speech signal, even for very low signal-to-noise
ratios of 0 dB. The bhi DSP technology is self-adapting to a changing noise

environment, and no training of the noise lter is required.

Customers can adjust the DSP lter level to suit their own needs and application.

When doing this, it does not change the characteristics of the noise, that is, any
residual noise still sounds natural.

0.1

-35

-30

-25

-20

-15

-10

-5

0

1

Typical range for voice modulation

10

Suppression level

Level 8

Level 7

Level 5

Level 3

Level 1

bhi DSP Noise Cancellation Product Selection Chart

4

Do you use an extension speaker or headphones?

If yes, go to [A]

If no, go to [B]

1. NEDSP1061-KBD - Suitable for many amateur radio transceivers and receiver installations,

tted in the receive audio path. Note: This involves the removal of small SMD components and

should only be carried out by someone with the appropriate electronic skills.

2. NEDSP1061-PCB, NEDSP1068-PCBA, NEDSP900 commercial install modules suitable for a

variety of radio and voice communication applications.

[C] - Low level audio DSP noise cancelling modules

Do you listen to stereo signals or use more than one radio simultaneously?

If yes, select Compact In-Line or Dual In-Line

If no, select NEIM1031MKII or ANEM MKII or NEDSP1062-KBD

[A] - In-line units

Would you like to retrot one of our low level audio DSP module inside your radio?

If yes, go to [C]

If no, go to [D]

[B] - Amplied DSP speakers & internal low level audio DSP modules

Do you operate mobile?

If yes, select the NES10-2MK3 or DSPKR

If no, select the DESKTOP, NES10-2MK3 or DSPKR

[D] - Amplied DSP speakers

Use the selection path below to choose your bhi DSP noise cancelling product:

5

Product Description Speaker

Head­phone

Socket

Speaker

Socket

Line

Level

Audio

Internal

Install

DSP

Filtering

Audio

Power

(Watts)

DSPKR

DSP Noise Cancelling

Speaker

10

NES10-2-MK3

DSP Noise Cancelling

Speaker

2.5

DESKTOP

DSP Noise Cancelling Base

Station Speaker

10

NEIM1031MKII

Amplied inline DSP Module

3

Dual In-Line

Dual channel DSP noise
eliminating
inline module

7

Compact-In-Line

Dual channel DSP noise
cancelling module (Portable)

0.2

ANEM

Compact inline DSP module

3

NEDSP1061-KBD

Low-level audio DSP module

NEDSP1062-KBD

Amplied DSP Speaker

Module

NEDSP900 / NEDSP1061­PCB / NEDSP1068-PCBA

Low level audio DSP

PCB modules

bhi Product Selection Table

Note: All bhi DSP noise cancelling products are designed to minimise the effects of RF interference.

6

External installations

NEIM1031

Noise Eliminating In-Line Module

Using in-line with a loudspeaker or headphones

NES10-2 MK3, DSPKR or DESKTOP

Amplied DSP Noise cancelling speakers

1. NEIM1031MKII, Dual In-Line or Compact In-Line

Audio source, transceiver or receiver

Connect your NES10-2 MK3, DSPKR or DESKTOP speaker
to the extension speaker socket of the radio.
Cleans up the incoming audio so you can hear the speech.

Simple to use and easy to t.

All require separate 12V DC power supply.

Fully featured amplied DSP module

with comprehensive controls, audio
& line level in/out and 3.5mm mono
headphone socket

Extension loudspeaker
(bhi LSPKR 4Ohm 20
Watt speaker or SPKR8
8Ohm 8Watt speaker)

Simple to use compact in-line DSP unit with microprocessor

push button control of the DSP lterlevels

Audio source - Speaker
level and line level

2. ANEM ‘Noise Away’ MKII

Where an external loudspeaker is being used there are four bhi in-line solutions.

7

Internal installations

NEDSP1061-PCB/KBD, NEDSP900, NEDSP1068-PCBA

for use in low power signal applications

NEDSP1062-KBD/PCB modules

provide an amplied output. They
can be tted inside larger extension

speakers (or radio equipment)

subject to space. The KBD version is
pre-wired whilst the PCB version is a
basic PCB with 0.1” terminations for

connection to wires or 0.1” headers

The NEDSP1061-KBD and NEDSP1062-KBD are pre-wired modules that are quite
easy to install if you know what you are doing. There are also basic DSP modules
for use in commercial installations.

Extension speaker

Audio source

Can be installed in the low level audio
path to provide clean received audio

Can be installed in the
microphone path to
provide clean audio
being transmitted

Retrot inside

Other applications:

• Intercoms

• Customer help points

• Door entry systems

bhi’s amplied DSP noise cancelling speakers simply connect to the extension

speaker socket of your radio or receiver and require a 12V DC power supply to

operate them. The DSPKR and DESKTOP speakers have the added feature that
they can also operate with a line level input from an SDR radio or computer. Audio

leads, fused DC power leads and user manuals are supplied with all products.

DSPKR 10 Watt DSP noise cancelling speaker

8

DSP Noise Cancelling Speakers

NES10-2MK3 DSP noise cancelling speaker

• 10Watts audio

• 8 lter levels

• Simple pushbutton control

• Audio input level LED

• Separate volume control

• Filter level scroll and store function

• Sleep mode to conserve battery power

• Adjustable mounting bracket

• 3.5mm mono Headphone socket

• Up to 6Watts input

• Dims: 135(W) x 130(H) x 85 (D)mm, Weight 0.85Kg

• Fully adaptive DSP noise cancelling 9 to 35dB

• Power on/off switch with audio bypass

• 8 noise cancelling lter levels

• 2.5Watts audio - 3.5mm mono headphone socket

• 2m audio lead with integral 3.5mm mono jack plug

• Compact robust speaker housing with metal mounting bracket

www.bhi-ltd.com/nes10-2mk3

www.bhi-ltd.com/dspkr

9

Don’t just take our word for it. Listen to the sound les and videos on our website!

DESKTOP 10Watt DSP noise cancelling base station speaker

• Quality 10Watt amplied DSP base station speaker

• 4” bass driver and 1” tweeter

• Works with most radios and receivers including SDR

• Simple to operate with easy to use rotary controls

• Speaker level and line level audio inputs

• Audio input level overload feature

• Noise reduction 9 to 35dB (8 levels)

• Microprocessor controlled functions

• 3.5mm headphone socket (mono or stereo phones)

“I have sometimes been a little sceptical about DSPnoise cancellation, but
this really does reduce noise veryeffectively without any annoying and
distracting DSPartefacts...”

RadCom Jan ‘14 review

“Unit works great, gets interference out very well. Would not be able operate my
amateur radio at home location, I use a Kenwood TS450 HF Transceiver”

David Digweed VE3FOI

“An ex cel len t e asy -to -us e p lug -in acc ess ory tha t c an sig ni cant ly imp rove y our
receivers audio performanceand readability”

RadCom magazine review

www.bhi-ltd.com/desktop

10

DSP Noise Cancelling In-line Modules

NEIM1031 MKII

• Fully Adaptive DSP noise cancelling 9 - 35dB

• 8 user selectable noise cancelling levels

• Line level input and output phono sockets

• 3.5mm mono audio input/output sockets

• 3.5mm mono headphone socket

• Separate output volume control

• Noise Cancellation on/off switch

• 12 – 24V DC operation 500mA

• Input level control with overload warning LED

ANEM MKII

• Compact, Stylish, easy to use in-line module

• Simple microprocessor controlled functions

• Noise reduction 9 – 35dB (8 levels)

• Tone reduction 4 – 65dB

• Power supply 12 – 18V DC (300mA)

• Visual and audio indication of lter level

• Power on/off Audio bypass Switch

• Use with a speaker or headphones

• Velcro strips for chassis mounting

• Standard 3.5mm mono audio connections

www.bhi-ltd.com/neim1031

www.bhi-ltd.com/anem

bhi’s DSP noise cancelling in-line modules are designed to t between your radio/audio
source and speaker/headphones or recording equipment. The NEIM1031MKII and ANEM

MKII accept mono signals

. The stereo/dual channel Dual In-Line and Compact In-

Line

modules incorporate our newer improved DSP Noise Cancelling technology, giving

improved speech quality at high noise levels. All the bhi in-line units require a separate 12V
DC supply and are supplied with audio and power leads, plus a user instruction manual.

11

Compact In-Line

Dual In-Line

• Compact handheld battery operated DSP noise
cancelling module

• New improved stereo/dual channel noise
cancelling algorithm

• Processed speech clearer and more intelligible

• Easy to use controls for all functions

• Use with mono, stereo or two separate audio channel inputs

• Ideal for portable use, DXing, and special event stations

• Use with headphones or a speakers

• Over 40 hours battery life

• Power supply 8 -16V DC (350mA max)

• New improved dual channel DSP noise

cancelling algorithm

• Use with mono, stereo or two separate channels

• 8 noise lter levels - 8 to 40dB noise cancellation

• Great flexibilty - accepts speaker level and line level audio

• Separate 7Watt mono audio and stereo headphone ampliers

• Easy to use controls for all functions

• Improved audio quality - processed
speech much clearer and intelligble

“Unbelievable! Noise gone! Other products don’t compare. Your new Dual In-Line allows

me to monitor 2 separate frequencies with my receiver as it has 2 VFO’s. Perfection.”

Ron Monfeli

www.bhi-ltd.com/dual

www.bhi-ltd.com/compact

•

Low level audio DSP modules for commercial applications

• Fully adaptive noise cancelling 9 to 35dB

• Suitable for OEM applications

• Input and output audio level adjustment

• Input overload indication LED

• 5 - 15V DC operation

• Small size 28mm x 36mm x 12mm

• Fit in Microphone or line level audio path

• 0.1” pitch Connections

bhi’s range of internal DSP noise cancelling pcb modules are suitable for retrotting inside

many amateur radio and commercial HF transceivers, receivers and radios. Commercial
versions of these modules can be designed into a wide range of voice communication
equipment and OEM applications, both in the receive and microphone path.

12

PCB Modules - Low Level Audio

NEDSP1061-KBD

NEDSP1061-PCB / NEDSP1068-PCBA

• Pre-wired DSP module for easy installation

• Fully adaptive noise cancelling 9 to 35dB (8 levels)

• Single button operation with LED and audible indication

• Input / output audio level adjustment

• Input overload indication LED

• 5 - 15V DC operation

www.bhi-ltd.com/nedsp1061-kbd

www.bhi-ltd.com/nedsp1061-pcb
www.bhi-ltd.com/nedsp1068-pcba

13

NEDSP900

• Dual channel congurable Noise Suppression

•

Up to 30dB maximum gain congurable input ampliers

• Low power consumption (typ <5mA)

• Wide supply voltage range (3 to 20V DC)

• In and outputs RF protected with LC low pass lter

• Up to 40dB noise suppression

• Audio bandwidth 300Hz to 5KHz

NEDSP1062-KBD speaker retrot module

• Passive speaker DSP conversion kit

• 8 levels noise cancellation up to 35dB

• Simple to t pre-wired DSP module

• Virtually no distortion to the speech

• Frequency response 50Hz - 4.3KHz

• Visual and audible indication of DSP level

• Input and Output level controls

• 3 watts output (4 ohms) with audio bypass

• Small size 37 x 50mm

• 12 - 18V DC voltage supply range

• Supplied with tting kit, labels, fused dc power

lead and install instructions

• NEDSP1062-PCB commercial version available

with 0.1” connections

PCB Modules - Amplied Audio

www.bhi-ltd.com/nedsp900

www.bhi-ltd.com/nedsp1062-kbd
www.bhi-ltd.com/nedsp1062-pcb

14

NEIS-RM25

View all of our products and accessories at www.bhi-ltd.com

Noise eliminating intercom system that removes the noise and

interference from within noisy environments to leave clear speech.
Suitable for use in a wide range of noisy environments where the

sounds of fans, motors, engines, air-conditioning, trafc etc give

rise to poor voice communications. The voice quality in medical treatment
rooms where radiotherapy and CT scanners are installed is greatly improved

and the NEIS-RM25 intercom system is suitable for installation with TomoTherapy/

Accuray scanners and most other makes of radiotherapy machines and CT scanners.

The NEIS-RM25 consists of a stylish desktop unit with a “push-to-talk” (ptt) button connected

to a remote “hands free” speaker unit via a straight through CAT5 data connection, with
connections to a 25ft microphone assembly that is located near the patient for optimum
speech quality. Power is supplied by a medical power supply connected to the desk unit.

Accessories - For use with our main DSP products

Noise Cancelling Intercom

Two Way Mini Switch Box

UK Mains Plug-in DC Power Supplies

Extension speakers1042 Six Way Switch Box

• Connect up to 6 pieces of equipment

to connect to your bhi DSP noise
cancelling product

• Supplied with 2 ALD-001 3.5mm mono

audio plug leads

• Connect two radios to your bhi DSP noise

cancelling product

• Supplied with 2 ALD-001 3.5mm mono

audio plug leads

PSU12-1A - 12V DC unregulated 1A for

DSPKR and Dual In-Line (European two pin

version PSU12-1A-EU)
PSU12-2A - 24 watt 12V DC 2 amp plug-in

switch mode power supply for the bhi DESKTOP
1030-UKPA - 12V DC unregulated 500mA

for NES10-2MK3, NEIM1031MKII, ANEM
MKII, NEDSP1062-KBD and Compact In-line

LSPKR - A 20W 4Ohm 4” extension speaker
SPKR8 - 8Ohm 8Watt extension speaker

15

To n d ou t m or e

Don’t put up with noise and interference any longer

Call us on: [phone]

Email: [e-mail]

Order online securely at: www.bhi-ltd.com

Get in touch with us today if you would like to discuss your noise problems, and
we can help you to select the best product to improve the speech quality in your
comms system.

bhi Ltd | @bhi_ltd | bhi-sales

T: [phone] | E: [e-mail] | www.bhi-ltd.com

bhi Ltd, 22 Woolven Close, Burgess Hill, West Sussex, RH15 9RR, UK

bhi DSP noise cancelling products clean up

noisy voice signals to leave clear speech