ongratulations for selecting BH FITNESS as your primary source of fitness.
BH FITNESS treadmills offer many exercise programs that benefit users of
all levels and ages. Your new treadmill is designed to make your workouts
more effective and enjoyable. Please read this entire manual carefully before
using your treadmill. This will allow you to get a full understanding of all the
features your BH FITNESS treadmill provides. If you have any questions or
concerns, please contact the BH FITNESS or any authorized BH FITNESS
distributors in your area.
BH FITNESS
20155 Ellipse
Foothill Ranch, CA 92610
Phone: 949-206-8152
Fax: 949-206-0013
Email: fitness@bhnorthamerica.com
BEFORE YOU BEGIN
It is very important to become familiar with the frequently used components
of your BH Fitness treadmill.
Notice: Before using this or any other exercise equipment consult your family physician
or health care professional to develop a well planned exercise program to fit your
health needs. If you encounter any pain or breathing discomfort while working out,
STOP!, and consult a physician before continuing
WARNING!
1. It is wise to always unplug this appliance from the electrical outlet immediately
after use.
2. Keep Children away from machine while in use.
3. Do not wear loose or dangling clothing while using the treadmill
4. Keep a minimum clearance of 18” on each side and 24” at the rear of the treadmill
for safety.
5. Maximum user weight for this treadmill is 300 lbs.
6. It is mandatory that you unplug the treadmill prior to cleaning to reduce the risk
of electric shock, serious burns, and the risk of injuries.
7. The treadmill should never be left unattended when in operation. Unplug the
treadmill from the outlet when not in use or when servicing the treadmill.
8. Close supervision is necessary when this appliance is used by or near children,
invalids, disabled persons, or those with diminished capacity.
9. Use this appliance only for its intended use as described in this manual.
Do not use any attachment not recommended by the manufacturer.
10. Never operate this appliance if it has a damaged cord or plug, or if it is not
working properly. Call your service center for any service concerns before taking
your treadmill in for repair.
11. Keep the cord away from heated surfaces.
12. Never drop or insert any object into any opening.
13. Do not use outdoors.
14. Do not operate where aerosol (spray) products are being used or where oxygen is
being administered.
15. To disconnect, turn all controls to the off position, then remove plug from outlet.
16. Connect this appliance to a properly grounded outlet only.
17. This appliance is intended for household use only.
This product must be grounded. If it malfunctions or breaks down, grounding
provides a path of least resistance for electric currents, to reduce the risk of
electric shock. This product is equipped with a cord which has an equipmentgrounding conductor and a grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with
all local codes and ordinances.
WARNING!
conductor can result in a risk of an electrical shock. Check with a qualified
electrician if you are in doubt as to whether the product is properly grounded.
Do not modify the plug provided to you. If it does not fit the outlet, have a
proper outlet installed by a qualified electrician.
This product is for use on a nominal 110-120-volt circuit and has a grounding
plug that looks like the plug illustrated in the figure. Make sure that the
product is connected to an outlet having the same configuration as the plug.
No adapter or extension cord should be used with this product.
OUTLET
– An improper connection of the equipment grounding
A minimum of two people are required
to assemble this treadmill. Also, READ
and understand ALL INSTRUCTIONS
thoroughly BEFORE ASSEMBLING
the treadmill.
1. Tie the Lower Control Wire of
the Main Frame (B) with the
Guide Thread of the Right
Upright (D), pull the wire into
the Upright, and secure with
wire clip, then insert into the
Upright.
2. Secure the left (C) and right (D)
uprights onto the treadmill base
with 8 (a) bolts and washers (b).
* Ensure that the wire is not pinched
between the upright and the treadmill
base when securing the upright
3. After the Uprights are tightened,
pull out the Control Wire that
has been threaded into the
Upright to the position shown in
the drawing at the right, then
attach the Side Covers (F, G)
onto the Frame, and tighten
with Screws (d).