Beyerdynamic MA-PVA Datasheet

TECHNICAL SPECIFICATIONS

Frequency response . . . . . . . . . . . . . 20 - 20,000 Hz

Noise voltage . . . . . . . . . . . . . . . . . . 4.4 µV [CCIR, Q-Peak];

0.9 µV [A, RMS]
Max. output voltage

of MA-PVA at XLR . . . . . . . . . . . . . . 1.6 V

Power supply . . . . . . . . . . . . . . . . . . 11 - 52 V phantom

power: P12-P48, P12L, SP48

DC voltage to microphone . . . . . . . . 5.1 V

Power consumption . . . . . . . . . . . . . approx. 2.7 mA

Output impedance . . . . . . . . . . . . . . 200 Ω

Nominal load impedance . . . . . . . . . > 1 kΩ

Output connector. . . . . . . . . . . . . . . 3-pin XLR, male

Input connector . . . . . . . . . . . . . . . . 4-pin mini XLR, male

Pin assignment . . . . . . . . . . . . . . . . . TG pin assignment

Dimensions

Length . . . . . . . . . . . . . . . . . . . . . . . 82 mm

Diameter . . . . . . . . . . . . . . . . . . . . . 19 mm without clip

Weight. . . . . . . . . . . . . . . . . . . . . . . 53 g

APPLICATIONS

The MA-PVA power adapter is used for powering the beyerdynamic
condenser microphones such as headset, lavaliere or instrument
microphones with mini XLR connection and TG pin assignment. It
converts the phantom power coming from a balanced microphone
input (pre-amplifier, mixing console etc.) into AB powering which is
required by electet capsules.
Due to its belt clip the MA-PVA can be attached to a belt or
clothing.

FEATURES

• 4-pin mini XLR male (input)

• 3-pin XLR male (output)

• Belt clip

WIRING DIAGRAM

beyerdynamic GmbH & Co. KG
Theresienstr. 8 | 74072 Heilbronn – Germany
Tel. [phone] / 617 - 0 | Fax [phone] / 617 - 204
[e-mail] | www.beyerdynamic.com

For further distributors worldwide, please go to www.beyerdynamic.com
Non-contractual illustrations. Contents subject to change without notice. E1/MA-PVA (07.15)

MA-PVA

Power Adapter

Order # 711.098

1 of 1

4-pin Mini-XLR male 3-pin XLR male

NF

+5V

4

20k

3

2

1

3

2

1

-

+