Beyer Dynamic M 81 LM datasheet

Page 1

BEVER DYNAMIC

M 81 LM M 81 (K

ENGINEERING DATA

M 818 (stereo recording)

Unidirectional Dynamic Microphone

Cardioid pick-up pattern

  • For use with any type of tape or cassette recorders, suits all impedances
  • Attractive metal case
  • Complete with table stand and clamp
  • Superior recording with a matched pair of M 81 = M 818

DESCRIPTION AND APPLICATIONS

The BEYERDYNAMIC M 81 cardioid moving coil microphone combines elegant styling with BEYERDYNAMIC's mar year's experience in the construction of professional studio microphones.

The M 81 has a good frequency response that is designed to match the requirements of most home tape or casset recorders. It has an attractively designed solid metal case, with a special transducer mounting to reduce handling nois when used in 'reporter type' situations.

It is especially suited as a replacement for the low cost, inferior quality microphone that is commonly supplied with the home type recorder.

The moving coil microphone is by far the most popular type in both professional recording and broadcast studic throughout the world. The M 81 is an excellent example of this type of transducer.

The M 81 is supplied complete with table stand, clamp and with a fixed cable.

The M 81 is also available as a matched pair for stereo recording (M 818). The M 818 comes complete with two M 8 microphones, adapter (stereo) cable, clamps, mounting bar and presentation case.

Page 2

BEVER DYNAMIC

M 81 LM M 81 (K

ENGINEERING DATA

M 818 (stereo recording)

Unidirectional Dynamic Microphone

Cardioid pick-up pattern

  • For use with any type of tape or cassette recorders, suits all impedances
  • Attractive metal case
  • Complete with table stand and clamp
  • Superior recording with a matched pair of M 81 = M 818

DESCRIPTION AND APPLICATIONS

The BEYERDYNAMIC M 81 cardioid moving coil microphone combines elegant styling with BEYERDYNAMIC's mar year's experience in the construction of professional studio microphones.

The M 81 has a good frequency response that is designed to match the requirements of most home tape or casset recorders. It has an attractively designed solid metal case, with a special transducer mounting to reduce handling nois when used in 'reporter type' situations.

It is especially suited as a replacement for the low cost, inferior quality microphone that is commonly supplied with the home type recorder.

The moving coil microphone is by far the most popular type in both professional recording and broadcast studic throughout the world. The M 81 is an excellent example of this type of transducer.

The M 81 is supplied complete with table stand, clamp and with a fixed cable.

The M 81 is also available as a matched pair for stereo recording (M 818). The M 818 comes complete with two M 8 microphones, adapter (stereo) cable, clamps, mounting bar and presentation case.

Page 3

BEVER DYNAMIC

M 81 LM M 81 (K

ENGINEERING DATA

M 818 (stereo recording)

Unidirectional Dynamic Microphone

Cardioid pick-up pattern

  • For use with any type of tape or cassette recorders, suits all impedances
  • Attractive metal case
  • Complete with table stand and clamp
  • Superior recording with a matched pair of M 81 = M 818

DESCRIPTION AND APPLICATIONS

The BEYERDYNAMIC M 81 cardioid moving coil microphone combines elegant styling with BEYERDYNAMIC's mar year's experience in the construction of professional studio microphones.

The M 81 has a good frequency response that is designed to match the requirements of most home tape or casset recorders. It has an attractively designed solid metal case, with a special transducer mounting to reduce handling nois when used in 'reporter type' situations.

It is especially suited as a replacement for the low cost, inferior quality microphone that is commonly supplied with the home type recorder.

The moving coil microphone is by far the most popular type in both professional recording and broadcast studic throughout the world. The M 81 is an excellent example of this type of transducer.

The M 81 is supplied complete with table stand, clamp and with a fixed cable.

The M 81 is also available as a matched pair for stereo recording (M 818). The M 818 comes complete with two M 8 microphones, adapter (stereo) cable, clamps, mounting bar and presentation case.

Page 4

his polar pattern and frequency response curve correspond to typical machine run specifications from a standard M 81.

SPECIFICATIONS FURNISHED AC CESSORIES
Operating Principle: Pressure Gradient
Frequency Response: 50 — 16.000 Hz. _ 8 M 81: micr ophone clamp MKV 30, tripod table star
Polar Pattern: Cardioid ST 3
Attenuation at 180°: > 18 db M 818 2 cla amos and 2 table stands as above 1 stere
Output Level at 1 kHz: rail 2 ZMS 1, 1 stereo adapter cable B 7.1-52-00
Open Circuit Voltage 2.3 mV/Pa 1.1
(0 dbm ≙ 1 mW/Pa)
EIA Sensitivity Rating —150.6 dbm
Electrical Impedance: 500 ohms OPTIONAL ACC FEEODIES
Load Impedance: > 2000 ohms OFTIONAL ACC 2030hie3
Diaphragm: Hostaphan Windscreen WS 81, available at your choice in re
Case: Zinc die-casting blue, green, yellow or gray colour.
Case Finish: Head varnished,
Housing matt chromed
Clamp Quick release clamp MKV 7
Net Weight (with cable): 11.30 ounces (320 grams) Plug-in transforme r TR/BV 741 020 662 L-H
100 CA 80 non-detachable, 6'6" (2 m). for high impedance e (for DIN connections)
highly flexible, twin scree- inputs
Connector - M 81 I M 3-pin plug MAS 30 or M 81 can also be e mounted on gooseneck and floor stand
equivalent e. g. for stereo i recordings with M 818. For details pleas
11 01 00 Standard phone lack inquire.

The microphone shall be a moving coil (dynamic) type microphone with a frequency range of 50 — 16,000 Hz. The unit shall have a cardioid polar characteristic. Attenuation at 180° shall exceed 18 db. The microphone output shall be —55,8 dbm when 0 dbm 1 mW/Pa respectively 2.3 mV/Pa. EIA sensitivity rating at 1,000 Hz. shall be —150.6 dbm. Electrical impedance shall be 500 ohms. The case shall be made of zinc die-casting. Case finish shall be matt chromed for the housing, the head shall be varnished. The dimensions shall be: 5.47" (139 mm) in length, shaft [] 0.86" x 0.86" (22 mm), head [] 1.3" x 1.3" (33 mm).

5.47

The microphone shall be equipped with a non-detachable cable, 6'6" (2 m), highly flexible, twin-screened, terminating in a 3-pin plug MAS 30 or equivalent (M 81 LM) or in a standard phone jack (M 81 (K)).

The BEYERDYNAMIC model M 81 is specified.

Positive pressure produces positive voltage at pin 1 (+)

distributed by:

Page 5

his polar pattern and frequency response curve correspond to typical machine run specifications from a standard M 81.

SPECIFICATIONS FURNISHED AC CESSORIES
Operating Principle: Pressure Gradient
Frequency Response: 50 — 16.000 Hz. _ 8 M 81: micr ophone clamp MKV 30, tripod table star
Polar Pattern: Cardioid ST 3
Attenuation at 180°: > 18 db M 818 2 cla amos and 2 table stands as above 1 stere
Output Level at 1 kHz: rail 2 ZMS 1, 1 stereo adapter cable B 7.1-52-00
Open Circuit Voltage 2.3 mV/Pa 1.1
(0 dbm ≙ 1 mW/Pa)
EIA Sensitivity Rating —150.6 dbm
Electrical Impedance: 500 ohms OPTIONAL ACC FEEODIES
Load Impedance: > 2000 ohms OFTIONAL ACC 2030hie3
Diaphragm: Hostaphan Windscreen WS 81, available at your choice in re
Case: Zinc die-casting blue, green, yellow or gray colour.
Case Finish: Head varnished,
Housing matt chromed
Clamp Quick release clamp MKV 7
Net Weight (with cable): 11.30 ounces (320 grams) Plug-in transforme r TR/BV 741 020 662 L-H
100 CA 80 non-detachable, 6'6" (2 m). for high impedance e (for DIN connections)
highly flexible, twin scree- inputs
Connector - M 81 I M 3-pin plug MAS 30 or M 81 can also be e mounted on gooseneck and floor stand
equivalent e. g. for stereo i recordings with M 818. For details pleas
11 01 00 Standard phone lack inquire.

The microphone shall be a moving coil (dynamic) type microphone with a frequency range of 50 — 16,000 Hz. The unit shall have a cardioid polar characteristic. Attenuation at 180° shall exceed 18 db. The microphone output shall be —55,8 dbm when 0 dbm 1 mW/Pa respectively 2.3 mV/Pa. EIA sensitivity rating at 1,000 Hz. shall be —150.6 dbm. Electrical impedance shall be 500 ohms. The case shall be made of zinc die-casting. Case finish shall be matt chromed for the housing, the head shall be varnished. The dimensions shall be: 5.47" (139 mm) in length, shaft [] 0.86" x 0.86" (22 mm), head [] 1.3" x 1.3" (33 mm).

5.47

The microphone shall be equipped with a non-detachable cable, 6'6" (2 m), highly flexible, twin-screened, terminating in a 3-pin plug MAS 30 or equivalent (M 81 LM) or in a standard phone jack (M 81 (K)).

The BEYERDYNAMIC model M 81 is specified.

Positive pressure produces positive voltage at pin 1 (+)

distributed by:

Page 6

his polar pattern and frequency response curve correspond to typical machine run specifications from a standard M 81.

SPECIFICATIONS FURNISHED AC CESSORIES
Operating Principle: Pressure Gradient
Frequency Response: 50 — 16.000 Hz. _ 8 M 81: micr ophone clamp MKV 30, tripod table star
Polar Pattern: Cardioid ST 3
Attenuation at 180°: > 18 db M 818 2 cla amos and 2 table stands as above 1 stere
Output Level at 1 kHz: rail 2 ZMS 1, 1 stereo adapter cable B 7.1-52-00
Open Circuit Voltage 2.3 mV/Pa 1.1
(0 dbm ≙ 1 mW/Pa)
EIA Sensitivity Rating —150.6 dbm
Electrical Impedance: 500 ohms OPTIONAL ACC FEEODIES
Load Impedance: > 2000 ohms OFTIONAL ACC 2030hie3
Diaphragm: Hostaphan Windscreen WS 81, available at your choice in re
Case: Zinc die-casting blue, green, yellow or gray colour.
Case Finish: Head varnished,
Housing matt chromed
Clamp Quick release clamp MKV 7
Net Weight (with cable): 11.30 ounces (320 grams) Plug-in transforme r TR/BV 741 020 662 L-H
100 CA 80 non-detachable, 6'6" (2 m). for high impedance e (for DIN connections)
highly flexible, twin scree- inputs
Connector - M 81 I M 3-pin plug MAS 30 or M 81 can also be e mounted on gooseneck and floor stand
equivalent e. g. for stereo i recordings with M 818. For details pleas
11 01 00 Standard phone lack inquire.

The microphone shall be a moving coil (dynamic) type microphone with a frequency range of 50 — 16,000 Hz. The unit shall have a cardioid polar characteristic. Attenuation at 180° shall exceed 18 db. The microphone output shall be —55,8 dbm when 0 dbm 1 mW/Pa respectively 2.3 mV/Pa. EIA sensitivity rating at 1,000 Hz. shall be —150.6 dbm. Electrical impedance shall be 500 ohms. The case shall be made of zinc die-casting. Case finish shall be matt chromed for the housing, the head shall be varnished. The dimensions shall be: 5.47" (139 mm) in length, shaft [] 0.86" x 0.86" (22 mm), head [] 1.3" x 1.3" (33 mm).

5.47

The microphone shall be equipped with a non-detachable cable, 6'6" (2 m), highly flexible, twin-screened, terminating in a 3-pin plug MAS 30 or equivalent (M 81 LM) or in a standard phone jack (M 81 (K)).

The BEYERDYNAMIC model M 81 is specified.

Positive pressure produces positive voltage at pin 1 (+)

distributed by:

Page 7

M 81 LM M 81 N (K)

Dynamisches Richtmikrofon

Beschreibung und Anwendung

Das M 81 LM ist ein dynamisches Richtmikrofon für alle Tonbandgerätebesitzer, die wirklich gute eigene Sprach- ur Musikaufnahmen machen wollen. Es ist sowohl für die Verwendung zu Hause als auch für den Einsatz im Freien ge eignet, denn seine ausgeprägte Nierencharakteristik hilft, störende Schallreflexionen in geschlossenen Räumen ebens wie lästige Umweltgeräusche bei Außenaufnahmen wirksam auszublenden. Sein stabiles Ganzmetallgehäuse nimmt auc eine gelegentliche rauhe Behandlung nicht übel. Auch der Ton-Schmalfilmer weiß diese Eigenschaften zu schätzen ur greift daher gerne zum M 81 LM.

Das 2 m lange Anschlußkabel ist unverlierbar mit dem Mikrofon verbunden und erlaubt den Anschluß an praktisch al auf dem Markt befindlichen Tonbandgeräte. Für Geräte mit Klinkenbuchsen ist es unter der Bezeichnung M 55 N (K) m poligem Klinkenstecker 6,35 mm Ø lieferbar. Das mitgelieferte Dreibein-Tischstativ hat eine abschraubbare Halte clammer, die zu jedem Fußbodenstativ mit 3/8" Gewinde paßt.

Für Stereo-Aufnahmen empfehlen wir die aus zwei Mikrofonen M 81 LM und entsprechendem Zubehör bestehend Stereo-Kombination M 818 LM.

Page 8

M 81 LM M 81 N (K)

Dynamisches Richtmikrofon

Beschreibung und Anwendung

Das M 81 LM ist ein dynamisches Richtmikrofon für alle Tonbandgerätebesitzer, die wirklich gute eigene Sprach- ur Musikaufnahmen machen wollen. Es ist sowohl für die Verwendung zu Hause als auch für den Einsatz im Freien ge eignet, denn seine ausgeprägte Nierencharakteristik hilft, störende Schallreflexionen in geschlossenen Räumen ebens wie lästige Umweltgeräusche bei Außenaufnahmen wirksam auszublenden. Sein stabiles Ganzmetallgehäuse nimmt auc eine gelegentliche rauhe Behandlung nicht übel. Auch der Ton-Schmalfilmer weiß diese Eigenschaften zu schätzen ur greift daher gerne zum M 81 LM.

Das 2 m lange Anschlußkabel ist unverlierbar mit dem Mikrofon verbunden und erlaubt den Anschluß an praktisch al auf dem Markt befindlichen Tonbandgeräte. Für Geräte mit Klinkenbuchsen ist es unter der Bezeichnung M 55 N (K) m poligem Klinkenstecker 6,35 mm Ø lieferbar. Das mitgelieferte Dreibein-Tischstativ hat eine abschraubbare Halte clammer, die zu jedem Fußbodenstativ mit 3/8" Gewinde paßt.

Für Stereo-Aufnahmen empfehlen wir die aus zwei Mikrofonen M 81 LM und entsprechendem Zubehör bestehend Stereo-Kombination M 818 LM.

Page 9

M 81 LM M 81 N (K)

Dynamisches Richtmikrofon

Beschreibung und Anwendung

Das M 81 LM ist ein dynamisches Richtmikrofon für alle Tonbandgerätebesitzer, die wirklich gute eigene Sprach- ur Musikaufnahmen machen wollen. Es ist sowohl für die Verwendung zu Hause als auch für den Einsatz im Freien ge eignet, denn seine ausgeprägte Nierencharakteristik hilft, störende Schallreflexionen in geschlossenen Räumen ebens wie lästige Umweltgeräusche bei Außenaufnahmen wirksam auszublenden. Sein stabiles Ganzmetallgehäuse nimmt auc eine gelegentliche rauhe Behandlung nicht übel. Auch der Ton-Schmalfilmer weiß diese Eigenschaften zu schätzen ur greift daher gerne zum M 81 LM.

Das 2 m lange Anschlußkabel ist unverlierbar mit dem Mikrofon verbunden und erlaubt den Anschluß an praktisch al auf dem Markt befindlichen Tonbandgeräte. Für Geräte mit Klinkenbuchsen ist es unter der Bezeichnung M 55 N (K) m poligem Klinkenstecker 6,35 mm Ø lieferbar. Das mitgelieferte Dreibein-Tischstativ hat eine abschraubbare Halte clammer, die zu jedem Fußbodenstativ mit 3/8" Gewinde paßt.

Für Stereo-Aufnahmen empfehlen wir die aus zwei Mikrofonen M 81 LM und entsprechendem Zubehör bestehend Stereo-Kombination M 818 LM.

Page 10

Technische Daten Empfohlenes Zu behör
Akustische Arbeitsweise
Ubertragungsbereich
Richtcharakteristik
Druckgradientenempfänger
50 – 16 000 Hz
Niere
Klemmvorrichtung MKV 30, mit 3 / 6 " Innengewinde wird
mitgeliefert
MKV 7, mit 3 / 8 " Innengewinde
Richtungsmaß bei 180°
Feldleerlaufübertragungs-
18 dB Windschutz WS 81, Schaumnetzwindschutz, lieferbar
in gelb, grün, röt, blau, anthrazitgrau
faktor bei 1 kHz
0 dB ≙ 10 V/Pa
2,3 mV/Pa ≙ - 73 dBV Schwanenhälse SH 15/200 oder SH 15/400 mit MKV 7, gegebenenfalls mit Fußplatte ZSH 30.
Elektrische Impedanz
Nennabşchluß
> 2000 Ohm Tischstativ ST 300/30 wird mitgeliefert
Membrane
Gehäuse
Hostaphan
Zink-Druckguß
Fußbodenstative ST 201/1, ST 201 A/1, ST 205 A/1 +
Schwenkarm SCH 211, ST 230 incl.
Schwenkarm
Oberfläche
Gewicht
schwarz matt lackiert
265 g ohne Kabel
320 g mit Kabel
- Kabelübertrager
für hochohmigen
TR/BV 7.45.0.15.257/L-H/0,5 für
DIN-Anschlüsse
Anschluß 2 m langes hochflexibles,
zweiadriges geschirmtes
Kabel mit Stecker Mas 30
(M 81 N(K) mit 2 pol.
Klinkenstecker 6,35 mm Ø)
Anschluß
Schaltbild Al omessungen
Inches
(Illimator in Klammarn)

Kennzeichen + kennzeichnet Kontakt, an dem bei itivem Schalldruck ein

Das M 81 LM ist ein dynamisches Tauchspulenmikrofon mit einem Übertragungsbereich von 50 – 16 000 Hz. Seine Nierencharakteristik bewirkt eine Rückwärtsdämpfung bei 180 ° von 18 dB. Das Mikrofon hat einen Innenwiderstand von 500 Ohm und einen Feldlecrlaufübertragungsfaktor von 2,3 mV/Pa (0,23 mV/µbar.) Sein mattlackiertes Gehäuse und der lackierte Mikrofonkopf sind aus Zink-Druckguß gefertigt. Das Mikrofon ist 139 mm lang, sein größter Durchmesser ist 33 x 33 mm, es wiegt 265 g ohne Kabel. Der Anschluß ist ein 2 m langes, fest montiertes Kabel mit Stecker Mas 30 oder wahlweise mit 2pol. Klinkenstecker 6,35 mm Ø.

Anderungen vorbehalten

EUGEN BEYER ELEKTROTECHNISCHE FABRIK

5.47

Page 11

Technische Daten Empfohlenes Zu behör
Akustische Arbeitsweise
Ubertragungsbereich
Richtcharakteristik
Druckgradientenempfänger
50 – 16 000 Hz
Niere
Klemmvorrichtung MKV 30, mit 3 / 6 " Innengewinde wird
mitgeliefert
MKV 7, mit 3 / 8 " Innengewinde
Richtungsmaß bei 180°
Feldleerlaufübertragungs-
18 dB Windschutz WS 81, Schaumnetzwindschutz, lieferbar
in gelb, grün, röt, blau, anthrazitgrau
faktor bei 1 kHz
0 dB ≙ 10 V/Pa
2,3 mV/Pa ≙ - 73 dBV Schwanenhälse SH 15/200 oder SH 15/400 mit MKV 7, gegebenenfalls mit Fußplatte ZSH 30.
Elektrische Impedanz
Nennabşchluß
> 2000 Ohm Tischstativ ST 300/30 wird mitgeliefert
Membrane
Gehäuse
Hostaphan
Zink-Druckguß
Fußbodenstative ST 201/1, ST 201 A/1, ST 205 A/1 +
Schwenkarm SCH 211, ST 230 incl.
Schwenkarm
Oberfläche
Gewicht
schwarz matt lackiert
265 g ohne Kabel
320 g mit Kabel
- Kabelübertrager
für hochohmigen
TR/BV 7.45.0.15.257/L-H/0,5 für
DIN-Anschlüsse
Anschluß 2 m langes hochflexibles,
zweiadriges geschirmtes
Kabel mit Stecker Mas 30
(M 81 N(K) mit 2 pol.
Klinkenstecker 6,35 mm Ø)
Anschluß
Schaltbild Al omessungen
Inches
(Illimator in Klammarn)

Kennzeichen + kennzeichnet Kontakt, an dem bei itivem Schalldruck ein

Das M 81 LM ist ein dynamisches Tauchspulenmikrofon mit einem Übertragungsbereich von 50 – 16 000 Hz. Seine Nierencharakteristik bewirkt eine Rückwärtsdämpfung bei 180 ° von 18 dB. Das Mikrofon hat einen Innenwiderstand von 500 Ohm und einen Feldlecrlaufübertragungsfaktor von 2,3 mV/Pa (0,23 mV/µbar.) Sein mattlackiertes Gehäuse und der lackierte Mikrofonkopf sind aus Zink-Druckguß gefertigt. Das Mikrofon ist 139 mm lang, sein größter Durchmesser ist 33 x 33 mm, es wiegt 265 g ohne Kabel. Der Anschluß ist ein 2 m langes, fest montiertes Kabel mit Stecker Mas 30 oder wahlweise mit 2pol. Klinkenstecker 6,35 mm Ø.

Anderungen vorbehalten

EUGEN BEYER ELEKTROTECHNISCHE FABRIK

5.47

Page 12

Technische Daten Empfohlenes Zu behör
Akustische Arbeitsweise
Ubertragungsbereich
Richtcharakteristik
Druckgradientenempfänger
50 – 16 000 Hz
Niere
Klemmvorrichtung MKV 30, mit 3 / 6 " Innengewinde wird
mitgeliefert
MKV 7, mit 3 / 8 " Innengewinde
Richtungsmaß bei 180°
Feldleerlaufübertragungs-
18 dB Windschutz WS 81, Schaumnetzwindschutz, lieferbar
in gelb, grün, röt, blau, anthrazitgrau
faktor bei 1 kHz
0 dB ≙ 10 V/Pa
2,3 mV/Pa ≙ - 73 dBV Schwanenhälse SH 15/200 oder SH 15/400 mit MKV 7, gegebenenfalls mit Fußplatte ZSH 30.
Elektrische Impedanz
Nennabşchluß
> 2000 Ohm Tischstativ ST 300/30 wird mitgeliefert
Membrane
Gehäuse
Hostaphan
Zink-Druckguß
Fußbodenstative ST 201/1, ST 201 A/1, ST 205 A/1 +
Schwenkarm SCH 211, ST 230 incl.
Schwenkarm
Oberfläche
Gewicht
schwarz matt lackiert
265 g ohne Kabel
320 g mit Kabel
- Kabelübertrager
für hochohmigen
TR/BV 7.45.0.15.257/L-H/0,5 für
DIN-Anschlüsse
Anschluß 2 m langes hochflexibles,
zweiadriges geschirmtes
Kabel mit Stecker Mas 30
(M 81 N(K) mit 2 pol.
Klinkenstecker 6,35 mm Ø)
Anschluß
Schaltbild Al omessungen
Inches
(Illimator in Klammarn)

Kennzeichen + kennzeichnet Kontakt, an dem bei itivem Schalldruck ein

Das M 81 LM ist ein dynamisches Tauchspulenmikrofon mit einem Übertragungsbereich von 50 – 16 000 Hz. Seine Nierencharakteristik bewirkt eine Rückwärtsdämpfung bei 180 ° von 18 dB. Das Mikrofon hat einen Innenwiderstand von 500 Ohm und einen Feldlecrlaufübertragungsfaktor von 2,3 mV/Pa (0,23 mV/µbar.) Sein mattlackiertes Gehäuse und der lackierte Mikrofonkopf sind aus Zink-Druckguß gefertigt. Das Mikrofon ist 139 mm lang, sein größter Durchmesser ist 33 x 33 mm, es wiegt 265 g ohne Kabel. Der Anschluß ist ein 2 m langes, fest montiertes Kabel mit Stecker Mas 30 oder wahlweise mit 2pol. Klinkenstecker 6,35 mm Ø.

Anderungen vorbehalten

EUGEN BEYER ELEKTROTECHNISCHE FABRIK

5.47

Loading...