Bevles PHC70-MP17-A User Manual
S t a n d a r d S e r i e s - N o n - I n s u l a t e d
S t a n d a r d S e r i e s - N o n - I n s u l a t e d
Proofer / Hot Cabinets
Proofer / Hot Cabinets
U n i v e r s a l W i d t h
U n i v e r s a l W i d t h
Innovative Foodservice Equipment Custom Designed For Performance, Service and
Combination Cabinet for Low
NON-INSULATED
Temperature Proofing or
UNIVERSAL WIDTH MODEL
High Temperature Holding
PHC70-MP17-A
Standard Features:
• Choice of aluminum or stainless steel construction
• Extruded pan supports accept a variety of pans and
screens
• Full-length Lexan
positive closing latch and perimeter gasket
• Removable heating module with separate controls
for heat and humidity
• Maintains uniform temperature throughout cabinet
• Proof or hold with adjustable temperature from
80°F (27°C) to 180°F (82°C)
• "Cast-in" humidity system prevents element burnout
from water spills and potential injury from accidental
contact with exposed heating elements
®
door with heavy-duty hinges,
• Self-draining feature collects excess moisture into a
standard bun pan (not included) below the base of
the cabinet
• Completely removable interior components for quick
and easy cleaning
• Heavy-duty plate-type casters with 5" hard neoprene
wheels, front two with brakes
• 120V, 20A, 1PH, service
Model PHC70-MP17-A
120V 20A MODELS
®®
BEVLES COMPANY, INC. Mailing: 729 Third Ave., Dallas, TX 75389-0209 • Shipping: 1938 Wyott Dr., Cheyenne, WY 82007
Toll Free: (800) 527-2100 • Local: (214) 421-7366 • Fax: (214) 565-0976 • www.bevles.com • sales@bevles.com
S t a n d a r d S e r i e s - N o n - I n s u l a t e d
S t a n d a r d S e r i e s - N o n - I n s u l a t e d
Proofer / Hot Cabinets
Proofer / Hot Cabinets
U n i v e r s a l W i d t h
U n i v e r s a l W i d t h
Item No.
Approval:
Date:
B
A
C
57.750 in
146.7 cm
FRONT VIEW SIDE VIEWREAR VIEW
BEVLES
MODEL NO.
PHC70-MP17-A
CAPACITY
18X26
17
DIM A (H) DIM B (W) DIM C (D)
*SPC'G CMIN CMIN CMIN CMIN
12X20
71.5
**34
3"
181.6
29
73.7 85.1
33 1/2
INSIDE HGT
52
132.1
SHIP WT
205 81.6
TOP VIEW
ACT WT
kgslbs kgslbs
93.0 180
* Adjustable on 1 1/2" centers ** Also accommodates 19" x 19" and 23" x 23" screens -A = Aluminum -S = Stainless steel
WATTS
STANDARD
OPTIONAL
VOLTAGEELECTRICAL
120 2000
208/240 2000
CABINET (Aluminum or Stainless Steel):
• Body: .063 aluminum or 22 ga. 304 #4 stainless steel
• Door: Clear Lexan
• Door Latch and Hinges: Patented positive action door latch
with heavy-duty stainless steel hinges
• Door Gasket: Closed cell foam
• Base: .125 aluminum or 14 ga. 304-2B stainless steel
• Rear (Air Duct) Panel: .063 aluminum or 22 ga. 304-2B
stainless steel
®
with an extruded aluminum frame
PAN SUPPORT ASSEMBLY:
• Pan Supports: Extruded pan supports adjustable on 1 1/2"
centers
• Uprights: .100 aluminum or 16 ga. 304-2B stainless steel
slotted on 1 1/2" centers
HEATING MODULE & CONTROLS:
• Bottom mounted heating unit with a one (1) piece modular
drop-in design blower assembly, easily removable for
maintenance and cleaning
• Air heating element at 1600 watts, 120 volts
• Humidity heating element rated at 400 watts, 120 volts
• 5 quart (4.7 liter) cast water reservoir
• Lexan
• Easy to operate controls feature precision thermostat,
• All controls are visible and operable from exterior of cabinet
®
water reservoir cover
variable humidity control and dial thermometer
AMPS ELECTRIC SERVICE CLEARANCESPHASE HERTZ
16.0 20A Dedicated Circuit
8.0 15A Dedicated Circuit
1
1
50/60
50/60
ELECTRICAL:
• Switch: Heavy-duty, 20 Amp, with water shed seal
• Cord and Plug: 8' cord with 20A molded plug (NEMA 5-20P);
208/240 volt models provided with cord only
CASTERS:
• Heavy-duty plate type casters, with 5" hard neoprene wheels;
all swivel, with wheel brakes on front two casters
OPTIONS AND ACCESSORIES
o Door hinging
o Lexan
o Solid, full, or dutch doors
o Corner bumpers of gray non-marking vinyl (set of 4)
o Perimeter bumper of gray non-marking vinyl
o Automatic water supply system eliminates need to manually
o Additional extruded universal pan supports
o 6" stainless steel legs with adjustable feet for stationary floor
o Choice of 4" or 5" casters with hard neoprene or
o 18" x 26" chrome electroplated wire racks
o Cord Guide/Protector: Unique cord guide provides safe and
o Aluminum or stainless steel drop handles
o Drip Trough
®
, dutch doors
fill water reservoir after simple hook-up to cold water line
installation *
polyurethane wheels *
easy routing to rear of cabinet
Specifications subject to change without notice.
Zero Clearance Cabinet
Zero Clearance Cabinet
BEVLES COMPANY, INC. (800) 527-2100 • Fax: (214) 565-0976
Printed in U.S.A. • 1/04 • Bevles\specsheets\PHC70-MP17.pdf
Loading...