Bevles CS34-TC10-HV User Manual
Options & Accessories
• Corner bumpers
• Perimeter bumper
• Door hinging
• Chrome electro-plated wire roasting racks
• 4” or 5” casters
Warranty & Cerifications
Parts and Service Warranty
• Protected by BevLes 2 year parts and 1
year service warranty
Certified by the following:
ROAST & HOLD OVENS
Tender Touch Classic Half-Size 208/240V
Design Features
• User-friendly solid state controls with digital
display
• Standard Pass-Thru design speeds
cleaning by eliminating hard-to-reach
corners – makes loading and unloading
quick and easy
• Power loss alarm informs operator of power
failure, that exceeds 3 minutes, during
unattended roasting or holding cycles
• Roast and hold temperature range of
145°F - 245°F (63°C - 118°C)
• Timer range allows a maximum roasting
time of 16 hours
• Heavy-duty Sealed Power Switch –
protects from water, grease and dirt
• Top mounted convection heat and humidity
system with high wattage heating element
maintains even temperatures throughout
the oven ensuring quick preheating and
rapid recovery
Quality Construction
• All stainless steel construction provides
years of dependable use in all types of
environment
• Top mounted heat and humidity system is
easily removable for cleaning and service
• High Quality Lexan® Front Panel Decal
allows for easy cleaning
• Door features include magnetic gasket to
prevent heat loss, heavy-duty hinges and
positive-closing latch
Mailing: 729 Third Ave., Dallas, TX 75226 • Shipping: 1938 Wyott Dr., Cheyenne, WY 82007
(800) 441-1601 • Fax: (214) 565-0976 • www.bevles.com • sales@bevles.com
Models: CS34-TC9-HV+ CS34-TC10-HV CS43-TC14-HV+ CS43-TC15-HV CS34-TCMP4-HV CS43-TCMP5-HV+ CS43-TCMP6-HV
Mailing: 729 Third Ave., Dallas, TX 75226 • Shipping: 1938 Wyott Dr., Cheyenne, WY 82007
(800) 441-1601 • Fax: (214) 565-0976 • www.bevles.com • sales@bevles.com
*
Note: Modifications involving casters or legs may affect height of equipment. Specifications subject to change without notice.
ROAST & HOLD OVENS
Tender Touch Classic Half-Size 208/240V
Model
Capacity Dimensions
Ship Wt. Act. Wt.
18x26 12x20 SPC’G H W D
Standard Width
CS34-TC9-HV+ 9 --- 1½” 34” (86.4 cm) 25” (63.5 cm) 31” (78.7 cm) 195 lbs (88.5 kg) 180 lbs (81.6 kg)
CS34-TC10-HV 10 --- 1½” 34” (86.4 cm) 25” (63.5 cm) 31” (78.7 cm) 195 lbs (88.5 kg) 180 lbs (81.6 kg)
CS43-TC14-HV+ 14 --- 1½” 43”
(109.2 cm)
25”
(63.5 cm)
31”
(78.7 cm)
235 lbs
(106.6 kg)
220 lbs
(99.8 kg)
CS43-TC15-HV 15 --- 1½” 43”
(109.2 cm)
25”
(63.5 cm)
31”
(78.7 cm)
235 lbs
(106.6 kg)
220 lbs
(99.8 kg)
Universal Width
CS34-TCMP4-HV 4 8 3¼” 34” (86.4 cm) 29” (73.7 cm) 31” (78.7 cm) 210 lbs (95.3 kg) 195 lbs (88.5 kg)
CS43-TCMP5-HV+ 5 10 3¼” 43”
(109.2 cm)
29”
(73.7 cm)
31”
(78.7 cm)
255 lbs
(115.7 kg)
240 lbs
(108.9 kg)
CS43-TCMP6-HV 6 12 3¼” 43”
(109.2 cm)
29”
(73.7 cm)
31”
(78.7 cm)
255 lbs
(115.7 kg)
240 lbs
(108.9 kg)
Electrical Voltage Watts Amps Electric Service Phase Hertz Clearances
Optional 208/120 2400 13 20A Dedicated Circuit 1 w/nuetral 50/60 Sides, Back, & Top = 0”
Optional 240/120 2740 13 20A Dedicated Circuit 1 w/nuetral 50/60 Sides, Back, & Top = 0”
Heating Modules & Controls:
• Heating Module: Removable for maintenance and
cleaning
• Humidity System
: Models CS34-TC9-HV+, CS43-TC14-HV+,
& CS43-TCMP5-HV+ are equipped with a 9 quart (8.5 liter)
stainless steel water reservoir with adjustable baffles
• Fan Blower
: 1-piece modular drop-in design blower
assembly
Pan Support Assembly:
• CS34-TC9-HV+ & TC10-HV, CS43-TC14-HV+ &
TC15-HV models have heavy-duty extruded aluminum
panels with pan supports on 1½” centers (pans are
lip supported)
• CS34-TCMP4-HV, CS43-TCMP5-HV+ & TCMP6-HV
models have 22 ga. stainless steel (air duct) panels
with heavy-duty chrome electro-plated wire pan supports
adjustable on 1 5/8” centers (pans are bottom supported)
Shipping:
• Freight Class: 85
• FOB: Cheyenne, WY 82007
Specifications:
• Exterior Body
: 20 ga. 304 #3 stainless steel
• Interior Body
: 20 ga. 304-2B stainless steel
• Exterior Door: 20 ga. 304 #3 stainless steel
• Interior Door: 22 ga. auto-brite stainless steel
• Base: 14 ga. 304-2B stainless steel
• Door Gasket(s)
: Magnetic, NSF approved Santoprene
• Insulation
: Fully insulated sides, base, top and door(s)
with 1.5” fiberglass insulation (5.7 R-Factor and
minimum rating of .26K per inch)
Electrical:
• Switch: Custom sealed heavy-duty 20 Amp
• Cord & Plug: 208V or 240V models provided with
8’ cord only
Casters:
• Heavy-duty plate type casters, all swivel, with 5” hard
neoprene wheels; front two casters with brakes (CS34
series feature 3” casters)
6/10/05
#B303
Models: CS34-TC9-HV+ CS34-TC10-HV CS43-TC14-HV+ CS43-TC15-HV CS34-TCMP4-HV CS43-TCMP5-HV+ CS43-TCMP6-HV
(+) designates models equipped with humidity system
Loading...