BevLes CA71-IN39 User Manual

Options & Accessories

• Perimeter bumper

• Corner bumpers

• Push/pull handles

• Door hinging (left)

Warranty & Cerifications

Parts and Service Warranty

• Protected by BevLes 2 year parts and 1
year service warranty

Certified by the following:

TRANSI-TRAY CABINETS

Heavy-Duty Insulated

Mailing: 729 Third Ave., Dallas, TX 75226 • Shipping: 1938 Wyott Dr., Cheyenne, WY 82007
[phone] • Fax: [phone] • www.bevles.com • [e-mail]

Design Features

• Used for short transport and temporary
holding of cold products

• Front mounted horizontal tie bar reinforces
cabinet and functions as a handle when
door is opened in 270° position

• Magnetic door gasket and positive closing
latch provide an air tight seal

• Polyurethane wheels provide durability
and easy mobility

• Pan supports are offered in 1½” or
1” spacing.

Quality Construction

• Aluminum construction

• Interlocking extruded inner side panels

• Heavy-duty, 270° swing stainless steel
hinges

• Fully insulated with polyurethane board
insulation

• Two drop handles mounted on rear of
cabinet

• One piece outer base with welded corners

• Heavy-duty plate type casters, all swivel
with 5” polyurethane wheels - front two
casters with brakes

Models:  CA71-IN39  CA71-IN59

Mailing: 729 Third Ave., Dallas, TX 75226 • Shipping: 1938 Wyott Dr., Cheyenne, WY 82007
[phone] • Fax: [phone] • www.bevles.com • [e-mail]

* Note: Modifications involving casters or legs may affect height of equipment. Specifications subject to change without notice.

TRANSI-TRAY CABINETS

Heavy-Duty Insulated

Construction

:

• Body

: .063 aluminum exterior

• Door

: .100 aluminum exterior

• Door Latch and Hinges

: Patented positive
action latch with heavy-duty, 11 ga. stainless
steel 270° swing hinges

• Base

: .190 aluminum with welded corners

• Insulation

: Fully insulated back, sides, top,

base, and door with 1” polyurethane board

• T

ie Bar: Heavy-duty extruded tie bar

(½” x ¾” x 18¼”)

Pan Support Assembly:

• Pan Support

s: Aluminum extrusion .075" thick
with interlocking "V" seam to provide sanitary
joint – 9/16" wide ledges on 1 1/2" or 1" centers

Casters:

• Heavy-duty plate type casters, all swivel, with
5” polyurethane wheels; front two casters with
brakes

Shipping:

• Freight Class: 125

• FOB: Cheyenne, WY 82007

Model

Capacity Dimensions

Ship Wt. Act. Wt.

18x26 12x20 SPC’G* H W D

CA71-IN39 39 --- 1½” 71” (180.3 cm) 24” (61 cm) 30.5” (80 cm) 206 lbs (93.4 kg)
CA71-IN59 59 --- 1” 71” (180.3 cm) 24” (61 cm) 30.5” (80 cm) 215 lbs (97.5 kg)

4/20/05

#B402

Models:  CA71-IN39  CA71-IN59