Beverage Air SPED72-12M-2 User Manual

Item No.
Quantity

3779 Champion Blvd., Winston-Salem, NC 27105
1-888-845-9800 Fax# [phone]
http://www.Beverage-Air.com

Commercial Refrigeration Equipment
General Specification

3 Year Parts/Labor Warranty

Additional 2 Year Compressor Warranty

SPED72 ELITE SERIES — MEGA TOP
WITH DRAWERS

Fifty percent greater pan capacity than the all-around standard prep table. Fea­tures enhanced refrigeration system. Improved airflow for less temperature
gradient and uniform temperature distribution throughout the cabinet. Pans are
cooled from the bottom, eliminating the nece ssity of air blanke t. Airflow assures
that product in open containers is kept below 41°F and above freezing. This
translates into increased product shelf life, higher quality food, better food ap­pearance, fresher product and a reduction of bacteria build-up to combat food­borne illnesses.

CABINET CONSTRUCTION

Exterior construction includes heavy-duty stainless steel finish on front, sides,
top, drawers and grille. Removable hoods and insulated lid assemblies are made
of matching stainless steel. Cabinet back and bottom are constructed of galva­nized steel. Interior liner is made of aluminum for superior resistance to corro­sion.

In cabinets with doors and drawers, doors are mounted to face of cabinet on
cartridge-style hinges permitting them to self close under their own weight. Hing­es also allow doors to stay open 120° and permit easy door removal for service
and cleaning if required. A plug-in type vinyl magnetic gasket is attached to
each door for positive seal.

Drawer frames are constructed of heavy-duty stainless steel and are supported
on heavy-duty telescoping drawer slides for maximum support of stored food
products. The drawer slides have a locking mechanism that prevents the draw­ers from being inadvertently pulled off the cabinets. Upper pull-out drawers
accommodate 4” deep pans. Lower pull-out drawers accommodate up to 6”
deep pans. Heavy-duty pan divider supports are supplied. Foodservice pans for
drawers are not included. Snap-type vinyl magnetic gasket is attached to each
drawer for positive seal. Top drawer extends 17 3/4” (when opened) and bot­tom drawer extends 15 3/4” (when opened).

Cabinet insulation is CFC an d HCFC-fr ee fo amed-i n-pl ace pol yure thane of two­inch minimum thickness. Six-in ch cast ers, 2 with brakes, are standa rd. Legs ar e
available as an option.

Cutting board supplied with cabinet is 10” wide constructed of high-density white
polyethylene plastic. It is readily removable for cleaning. Pans furnished for
top are 4” deep and made of polycarbonate plastic.

REFRIGERATION

More robust refrigeration system provides added capacity and efficiency. Sys­tems are designed using CFC and HCFC-free R134a refrigerant. Recirculated,
forced air from evaporator is moved under pans, which are recessed 2” from top
of cabinet. Forced air over the condenser is drawn through grille under bottom
drawer as well as the back and bottom of cabinet. Automatic condensate evapo­rator is provided to eliminate the need of floor drains.

FOOD PREPARATION
SERIES PREP TABLES

SPED72 ELITE SERIES
MEGA TOP WITH DRAWERS

SPED72-30M-2 (pictured)

ELECTRICAL CONNECTION

Units pre-wired at factory and
include 8’ long cord and plug set.

MODELS:
SPED72-M

*Note: Not all markings may apply to all model variations.

Available From:

Model Specified
Location

Food Prep Table — Mega Top With Drawers

Models: SPED72

Store#
Quantity

MODEL
EXTERNAL DIMENSIONAL DATA

Length Overall (inches)
Length Overall (mm)

Depth Overall (inches)
Depth Overall (mm)

Height Overall— (inches)
Height Overall— (mm)

Number of drawers 2 4 2 4 2 4 2 4
Number of doors 2 1 2 1 2 1 2 1
Top Drawer Extension (when opened) 17 3/4” 17 3/4” 17 3/4” 17 3/4” 17 3/4” 17 3/4” 17 3/4” 17 3/4”
Bottom Drawer Extension (when opened) 15 3/4” 15 3/4” 15 3/4” 15 3/4” 15 3/4” 15 3/4” 15 3/4” 15 3/4”

INTERNAL DIMENSIONAL DATA

NET Capacity (cubic ft.)
NET Capacity (Liters)

Internal Length Overall (inches)
Internal Length Overall (mm)

Internal Depth Overall (inches)
Internal Depth Overall (mm)

Internal Height Overall—(inches)
Internal Height Overall—(mm)

ELECTRICAL DATA

Full Load Amperes 115/60/1 9.6 9.6 9.6 9.6 9.6 9.6 9.6 9.6

REFRIGERATION DATA

Horsepower 1/3 1/3 1/3 1/3 1/3 1/3 1/3 1/3

WEIGHT DATA

Gross Weight (Crated lbs) 335 335 329 390 390 385 386 386
Gross Weight (Crated kg) 152 152 149 177 177 175 175 175

SPED72-12M-2 SPED72-12M-4 SPED72-18M-2 SPED72-18M-4 SPED72-24M-2 SPED72-24M-4 SPED72-30M-2 SPED72-30M-4

72”

1829

36 5/8”

930

45 1/2”

1156

21.5
609

68”

1727

19”
483

23”
584

36 5/8”

45 1/2”

72”

1829

930

1156

21.5
609

68”

1727

19”

483

23”

584

SPED72-12M-6

72”

1829

36 5/8”

930

45 1/2”

1156

6

­17 3/4”
15 3/4”

21.5
609

68”

1727

19”
483

23”
584

9.6

1/3

329
149

72”

1829

36 5/8”

930

45 1/2”

1156

21.5
609

68”

1727

19”
483

23”
584

36 5/8”

45 1/2”

72”

1829

930

1156

21.5
609

68”

1727

19”
483

23”
584

SPED72-18M-6

72”

1829

36 5/8”

930

45 1/2”

1156

6

­17 3/4”
15 3/4”

21.5
609

68”

1727

19”
483

23”
584

9.6

1/3

390
177

72”

1829

36 5/8”

930

45 1/2”

1156

21.5
609

68”

1727

19”
483

23”
584

72”

1829

36 5/8”

930

45 1/2”

1156

21.5
609

68”

1727

19”
483

23”
584

SPED72-24M-6

72”

1829

36 5/8”

930

45 1/2”

1156

6

­17 3/4”
15 3/4”

21.5
609

68”

1727

19”
483

23”
584

9.6

1/3

385
175

72”

1829

36 5/8”

930

45 1/2”

1156

21.5
609

68”

1727

19”
483

23”
584

72”

1829

36 5/8”

930

45 1/2”

1156

21.5
609

68”

1727

19”

483

23”

584

SPED72-30M-6

72”

1829

36 5/8”

930

45 1/2”

1156

6

­17 3/4”
15 3/4”

21.5
609

68”

1727

19”
483

23”
584

9.6

1/3

386
175

Note: Not all markings may apply to all model variations.

*N/A:: Not available at time of printing.

DRAWER SUPPORT CAPACITY

MODEL # OF PAN

SUPPORTS
(SUPPLIED)

SPED72 1 1 HALF SIZE AND

POSSIBLE PAN

COMBINATION

2 1/6TH SIZE

1 HALF SIZE AND

1 1/3RD SIZE

SPED72-12M SPED72-18M SPED72-24M

3779 Champion Blvd. • Winston-Salem, NC 27105 USA • [phone] • Fax [phone] • [phone] • www.beverage-air.com

PLAN VIEWS

SPED72-30M top assembly shown above. Refer to Top Pan Configurations at bottom,

left of spec sheet for appropriate top layout. Varies by cabinet.

SPED72-30M

TOP PAN CONFIGURATIONS

BEVERAGE-AIR® CORPORATION

Specifications are subject to change without prior notice. 06/13