Bestway P3122 User Manual

P3122

OWNER’S MANUAL

FCC ID:2AS3R-P3122
SAR Value:<0.01W/kg,1g

DUAL FUNCTION:

INFLATION & DEFLATION EXCLUSIVELY DESIGNED
FOR AIRBEDS

NOTICE:

READ CAREFULLY BEFORE OPERATING AND SAVE
THESE INSTRUCTIONS.

CAUTION:

TO AVOID THE RISK OF ELECTRIC SHOCK, DO NOT
EXPOSE TO WATER OR RAIN.

HOUSEHOLD USE ONLY.
WARNING:

1. This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of
electric shock, this plug is intended to fit in a polarized outlet only one way, if the plug does
not fit fully in the outlet, reverse the plug, if it still does not fit, contact a qualified electrician.
Do not attempt to defeat this safety feature.

2. To reduce the risk of electric shock or injury, use indoors only.

3. Motor run time should not exceed 5 minutes. Operator should allow motor to cool for 10
minutes between uses.

4. The air vent on the cover should be kept free of debris during use.

5. Product must be stored in a dry location.

6. Infants have suffocated on inflatable mattresses. Never place infant aged birth to 15 months
to sleep on this inflatable air mattress/air bed. Infants can suffocate on an underinflated or
deflated mattress, on bedding, by co-sleeping with another person, and by entrapment
between the mattress and bed frame or between the mattress and a vertical surface.

7. Children can be entrapped between the inflatable mattress and an adjacent vertical surface.
Provide at least a shoulder width space between the inflatable mattress/airbed and adjacent
vertical surfaces such as walls, dressers, or other objects.

8. Always keep the inflatable mattress fully inflated when in use.

9. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.

10. This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety. Children should be supervised to ensure that they do not play with the appliance.
Cleaning and user maintenance shall not be made by children.

11. This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.

12. Any changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.

SERVICING OF A DOUBLE-INSULATED PRODUCT

13.
In a double-insulated product, two systems of insulation are provided instead of grounding.
No grounding means is provided on a double-insulated product, nor should a means for
grounding be added to the product. Servicing of a double-insulated product requires extreme
care and knowledge of the system, and should be done only by qualified service personnel.
Replacement parts for a double-insulated product must be identical to those parts in the
product.

14. Please note that changes or modifications not expressly approved by the party responsible

for compliance could void the user’s authority to operate the equipment.

15.

This equipment complies with radio frequency exposure limits set forth by the FCC for an
uncontrolled environment.
This device must not be co-located or operating in conjunction with any other antenna or
transmitter.

NOTE:This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

--Reorient or relocate the receiving antenna.

--Increase the separation between the equipment and receiver.

--Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.

--Consult the dealer or an experienced radio/TV technician for help.

NOTE: Drawings for illustration purpose only. May not reflect actual product. Not to

scale.

CLEANING, MAINTENANCE & STORAGE:

1. If product gets dirty, use a clean damp cloth and wipe gently on the air bed surface.
Do not use harsh detergents to clean. Fold and store after product is dried.

2. Before storing the product, release all the air. Store in a cool and dry place.

3. Do not place sharp or heavy objects near or on top of the mattress. Doing so will
cause damage and tears.