PK22 SERIES
POWER PACK
SPECIFICATION SHEET
Specially designed to be installed in custom canopy
hoods for use over residential commercial-style
cooking surfaces.
FEATURES
Cabinet mount – custom application
•
Finish: 430 Stainless Steel
•
Widths: 27-3/4”, 36-1/2”, 43-7/16”
•
10” round duct connector/backdraft damper
•
Halogen lighting (2 bulbs included on PK2230 and PK2239
•
or 3 bulbs on PK2245; Type GU10, MR16 shielded, 120 volt,
50 watts max.)
Electronic, push-button controls
•
- 4 speeds
- 3 light settings
- 10-minute delay off
- 25-hour filter clean indicator
IQ1200 blower system
•
1. ) Best in class quiet operation
2.) Up to 30% faster smoke and odor removal than
comparable models
3.) Up to 22x more energy efficient than comparable models
4.) Guraranteed Performance System (GPS) technology
calibrates the power pack to every installation to provide
up to 30% more CFM than standard range hoods
Easily accessible, dishwasher-safe aluminum / stainless
•
steel hybrid baffle filters
- Less restrictive than traditional baffle filters
- Less mess / dripping than mesh filters
SPECIFICATIONS
MODEL VOLTS CFM
(High /
Working Speed
PK2230 120 1100 / 250 11.5 / 0.6 8.0
PK2239 120 1100 / 250 11.5 / 0.6 8.0
PK2245 120 1150 / 250 11.0 / 0.6 8.5
SONES
(High /
Working Speed
AMPS
Heat SentryTM - automatically turns blower to high speed
•
when excess cooking heat is detected
For indoor use only
•
OPTIONS
Stainless liner (AL3036, AL3042, AL3948, AL3954, AL4554,
•
AL4560)
Ambient light panel (ALP36, ALP42, ALP48, ALP54, ALP60)
•
Exterior blowers EB6*, EB9, EB12, EB15 and inline blowers
•
ILB3*, ILB6*, ILB9, ILB11 are compatible with PKEX models
(*These blowers can only be used with ranges rated 60,000
BTU/hr. or less.)
Remote control (ACR1)
•
Make-up air dampers (MD6TU, MD8TU)
•
C
L
11"
27-3/4", 36-1/2”, 43-7/16”
Mount range hood so bottom of hood is
24” to 30” above cooking surface.
Product performance is rated at 0.1 in. static pressure, based on tests
conducted in a state-of-the-art test laboratory. Sones are a measure
of humanly-perceived loudness, based on laboratory measurements.
5-1/2"
14-5/8"
15-7/16"
7/8"
BEST Hartford, Wisconsin www.BestRangeHoods.com 800-558-1711
BEST Drummondville, QC, Canada www.BestRangeHoods.com 866-737-7770
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
31A 99045074B
PK22 SERIES CABINET CUTOUT DIMENSIONS
POWER PACK
WIDTH
30" 263⁄16"
39" 34
45" 41
A
15
⁄16"
7
⁄8"
147⁄8"
A
PK22 SERIES SUPPORT AND MOUNTING SCREWS
Two of the six no. 8-18 x 1¼” provided chrome plated screw can
be used to support the hood during installation.
Place the power pack inside the custom hood and insert both
side screws.
The power pack can now be secured to the custom hood without having to hold it in place.
SUPPORT SCREW LOCATIONS
MOUNTING SCREW LOCATIONS