Best PIK33D Specification Sheet

PIK33D SERIES
INSERT

Especially designed to be installed in outdoor custom
hood for use over residential commercial-style
cooking surfaces or gas and electric grills. This unit
is not for use with a charcoal grill.

A complete installation requires several optional
components. Refer to page 2 when planning your
installation.

FEATURES

Corrosion resistant 316 Stainless Steel construction

•

UL Listed for use in damp locations when properly connected

•

to a GFCI circuit.

Cabinet mount _ custom application

•

Insert width: 33’’

•

Halogen lighting (2 x 50 watt GU10) lamps not included

•

Switch controls: Lighting, on-off, and infinite speed

•

Easily accessible, dishwasher-safe stainless steel

•

baffle filters

Heat Sentry™ turns blower ON to HIGH speed when

•

excess heat is detected

SPECIFICATION SHEET

HB0035

HK0077

Mount insert so bottom of custom hood is 36’’ to 42’’ above

cooking surface.

Custom Hood Liner

L3336D and L3348D Series

OPTION

Custom hood liners (L3336D and L3348D Series):

•

Widths - 36’’ and 48’’
Adjustable depth - see liner spec sheet for details
Corrosion resistant 316 Stainless Steel construction - protects
custom hood base and wipes clean easily

Designed for use with either interior blower (Model P8D),

•

in-line blower (Model ILB11), or exterior blower (Model EB12
or EB15)

INSERT SPECIFICATIONS

120 VAC, 60 Hz
Amps (without blower): 0.8 A

BEST Hartford, Wisconsin www.BestRangeHoods.com 800-558-1711

BEST Drummondville, QC, Canada www.BestRangeHoods.com 866-737-7770

REFERENCE QTY. REMARKS Project

Location

Architect

Engineer

Contractor

Submitted by Date

4''

HA0043A

01A 99043330D

PIK MOUNTING

Size of the cut-out

NOTE: If optional L3336D or L3348D series liner is used,
refer to installation instructions for size and location
of the cut-out.

32 1/2''

Suggested Custom Hood Internal Framework

1 1/2”

16 1/2''

2 1/4''

min.

11/16''

PIK33D

INSERT SYSTEM

Model ILB11 (1100 cfm)

in-line blower (includes two 8” x 12”

to 10’’ round transitions)

Model 441

(10” Round

wall cap)

10 3/4''

HH0043

Model 437

(High capacity roof cap)

Model 418
10” round adjustable
elbow (optional)

Model 410
(10” Round duct
—2 ft. sections)

Model EB12

(1200 cfm) or

EB15 (1500 cfm)

exterior blower

Model 421
(10” Round vert.
in-line damper)
Recommended
for use with
exterior blowers

HL0080

10” round metal

flexible duct

(optional)

(supplied with interior blower P8D)

Flow deviator

Model SV03428 transition
(9” x 18” to 10” round) (included)

L3336D or L3348D
Custom Hood Liner (optional)

PIK33D INSERT

Rough-in plate (supplied
with interior blower P8D)

Dual-blower P8D
(sold separately)