Best K808730SS Specsheet

K8087 SERIES RANGE HOODS

SPECIFICATION SHEET

With flowing lines that appear to be sculpted from a single block of stainless steel, this strong but graceful hood creates a striking focal point in any kitchen.

FEATURES

Italian design

•

Wall mount

•

Finish: 304 Stainless Steel #4 Brushed

•

Widths: 30” & 36”

•

Ducted/non-ducted telescopic flue accommodates 8’ to

•

9’ ceilings 6” round duct connector/backdraft damper

•

Halogen lighting (2 x 20 watt, Type JC 12V 20W G4

•

Base - bulbs included) with multilevels from bright cooktop illumination to a low nighttime setting Advanced, electronic push-button controls feature

•

delay shutoff Quiet, 4-speed centrifugal blower with high-efficiency

•

motor produces 450 cfm of exhaust Delay timer control automatically shuts off range hood

•

after ten minutes Special control indicates when it’s time to clean the

•

filter Can be ducted to the outside or non-ducted for indoor

•

recirculation (purchase recirculation kit separately) Dishwasher-safe filter features a quick-release latch

•

and decorative cover plate Heat SentryTM - automatically turns blower to high

•

speed when excess cooking heat is detected

OPTIONS

Replacement grease filters available (Part No.

•

SB08087169) Non-ducted recirculation kit (Model NDK7780)

•

Flue extension for 10’ ceiling (39-3/8” long) (for ducted

•

applications only) (Model FEXTK8087SS) Replacement charcoal filters available (Model

•

FILTERSQUARE) Exterior blower (KEX8087 Series) available, providing

•

600, 900, 1200, or 1500 cfm exhaust

BEST BY BROAN, P.O. BOX 140 HARTFORD, WISCONSIN 53027

SPECIFICATIONS

VOLTS AMPS CFM SONES DUCT

120 3.13 450 9.0 6” round

HVI-2100 CERTIFIED

rated at 0.1 in. static pressure, based on tests conducted in AMCA’s state-of-the-art test laboratory. Sones are a measure of humanly-perceived loudness, based on laboratory measurements.

RATINGS comply with new testing technologies and procedures prescribed by the Home Ventilating Institute, for off-the-shelf products, as they are available to consumers. Product performance is

REFERENCE QTY. REMARKS Project

Location

Architect

Engineer

Contractor

Submitted by Date

50K 99043286E

K8087 SERIES WIRING

CENTERLINE

OF DUCT & HOOD

120 VOLT 60 HZ GROUNDED WALL OUTLET

OFFSET FROM DUCT CENTER LINE

(STAY WITHIN 8” DIMENSION)

23" - 29"

K8087 SERIES MOUNTING

WOOD CROSS SUPPORT –

SECURED TO FRAMING AND

LOCATED BEHIND DRYWALL

DRYWALL

MOUNTING DISTANCE ABOVE 36” HIGH COOKTOP (SEE NOTE BELOW)

CEILING DUCT HEIGHT METHOD

8 FEET

9 FEET

10 FEET

DUCTED OR

NONDUCTED

DUCTED OR

NONDUCTED

DUCTED WITH

FEXTK8087

24” 25” 26” 27” 28” 29” 30”

MOUNTING BRACKET LOCATION ABOVE 36” HIGH COOK TOP

36-3/4” 37-3/4” 38-3/4” 39-3/4” 40-3/4” 41-3/4”

37-3/4” 38-3/4” 39-3/4” 40-3/4” 41-3/4” 42-3/4”

36-3/4” 37-3/4” 38-3/4” 39-3/4” 40-3/4” 41-3/4” 42-3/4”

FRAMING BEHIND

WOOD CROSS SUPPORT

5 "

MOUNTING BRACKET LOCATION (ABOVE 36” HIGH COOKTOP)

NOTE: Minimum hood distance above cooktop must not be less than 24”.

A maximum of 30” above the cooktop is highly recommended for best capture of cooking impurities. Distances over 30” above the cooktop are at the installer’s and user’s discretion - providing that ceiling height and flue length permit.

BEST BY BROAN, P.O. BOX 140 HARTFORD, WISCONSIN 53027