Best K3500 User Manual
K3500 SERIES
RANGE HOODS
SPECIFICATION SHEET
Curved, sweeping surfaces blend imperceptibly
into a magnificent glass reveal.
FEATURES
Italian design
•
Wall mount
•
Finish: 304 Stainless Steel #4 Brushed
•
Width: 35-7/16” (90cm)
•
Ducted telescopic flue accommodates 8’ to 9’ ceilings
•
6” round duct connector/backdraft damper
•
Halogen lighting (2 x 20 watt, Type JC 12V 20W G4 Base)
•
provides two-level lighting – bright cooktop illumination
and a low nighttime setting (bulbs included)
Advanced, multispeed, electronic push-button controls
•
with individual speed indicators
Quiet, variable-speed centrifugal blower with high-efficiency
•
motor produces 450 CFM of exhaust
Delay timer control automatically shuts off range hood after
•
ten minutes
Special control indicates when it’s time to clean the filter
•
Dishwasher-safe aluminum filter features a quick-release
•
latch and a curved, designer appearance
Heat SentryTM - automatically turns blower to high speed
•
when excess cooking heat is detected
OPTIONS
Replacement grease filters available
•
Flue extension for 10’ ceiling (Model FEXTK3500SS)
•
(35-7/16” long)
Exterior blower version (KEX3500) available, providing
•
600, 900, 1200, or 1500 CFM exhaust
Replacement bulb (Part No. SB02300891)
•
SPECIFICATIONS
VOLTS AMPS CFM SONES DUCT
120 3.13 450 9.0 6” round
20-1/2”
HVI-2100 CERTIFIED RATINGS comply with new
testing technologies and procedures prescribed by
the Home Ventilating Institute, for off-the-shelf
products, as they are available to consumers. Product
performance is rated at 0.1 in. static pressure, based
on tests conducted in AMCA’s state-of-the-art test
laboratory. Sones are a measure of humanlyperceived loudness, based on laboratory
measurements.
18-1/4”
min 32”
max 46”
BEST BY BROAN P.O. BOX 140 HARTFORD, WISCONSIN 53027
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
50J 99043160F
K3500 SERIES WIRING
CENTER LINE OF
HOOD AND DUCT
K3500 SERIES MOUNTING
9-1/2”
4-3/4”
120 VOLT 60 HZ GROUNDED WALL OUTLET
OFFSET FROM DUCT CENTER LINE
(STAY WITHIN 9-1/2” DIMENSION)
27” - 33”
WOOD CROSS SUPPORT –
SECURED TO FRAMING AND
LOCATED BEHIND DRYWALL
DRYWALL
HOOD DISTANCE ABOVE 36” HIGH COOKTOP (SEE NOTE BELOW)
CEILING
HEIGHT
8 FEET 43-1/2” 44-1/2” 45-1/2” 46-1/2” 47-1/2”
9 FEET 45-1/2” 46-1/2” 47-1/2” 48-1/2” 49-1/2”
24” 25” 26” 27” 28” 29” 30”
MOUNTING BRACKET LOCATION ABOVE 36” HIGH COOK TOP
FRAMING BEHIND WOOD
CROSS SUPPORT
L
C
L
1
5 "
16
MOUNTING BRACKET
LOCATION
(ABOVE 36” HIGH
COOKTOP)
10 FEET WITH
FEXTK3500
NOTE: Minimum hood distance above cooktop must not be less than 24”.
A maximum of 30” above the cooktop is highly recommended for best capture of cooking impurities.
Distances over 30” are at the installer and users’ discretion; and if ceiling height and flue length permit.
43-1/2” 44-1/2” 45-1/2” 46-1/2” 47-1/2” 48-1/2” 49-1/2”
BEST BY BROAN P.O. BOX 140 HARTFORD, WISCONSIN 53027
Loading...