Page 1
K273 SERIES
RANGE HOODS
A delightful combination of curved and angular
surfaces gives this handcrafted chimney hood a
sensational appearance that complements highdesign kitchens.
SPECIFICATION SHEET
FEATURES
Italian design
•
Wall mount
•
Finishes: 304 Stainless Steel #4 Brushed, White, Black
•
Widths: 35-7/16” (90cm), 42”
•
Chrome-plated utensil rail
•
Ducted telescopic flue accommodates 8’ to 9’ ceilings
•
6” round duct connector/backdraft damper
•
Halogen lighting (2 x 20 watt, Type MR16 - bulbs included)
•
Advanced, multispeed, electronic push-button controls
•
with individual speed indicators
Quiet, variable-speed centrifugal blower with high-efficiency
•
motor produces 500 CFM of exhaust
Delay timer control automatically shuts off range hood after
•
ten minutes
Special control indicates when it’s time to clean the filter
•
Dishwasher-safe filters feature a quick-release latch and
•
polished stainless steel
Heat SentryTM - automatically turns blower to high speed
•
when excess cooking heat is detected
OPTIONS
Replacement grease filters available
•
Flue extension for 10’ ceiling (Model FEXTK273 in Stainless
•
Steel, White, Black) (31-1/2” long)
Exterior blower version (KEX273) available, providing 600,
•
900, 1200, or 1500 CFM exhaust
SPECIFICATIONS
VOLTS AMPS CFM SONES DUCT
120 3.13 500 9.5 6” round
35-7/16", 42"
(90 cm)
7-1/4"
17-1/4"
13-3/4"
19-5/8"
HVI-2100 CERTIFIED RATINGS comply with new
testing technologies and procedures prescribed by
the Home Ventilating Institute, for off-the-shelf
products, as they are available to consumers. Product
performance is rated at 0.1 in. static pressure, based
on tests conducted in AMCA’s state-of-the-art test
laboratory. Sones are a measure of humanlyperceived loudness, based on laboratory
measurements.
BEST BY BROAN P.O. BOX 140 HARTFORD, WISCONSIN 53027
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
50J 99043157F
Page 2
K273 SERIES WIRING
CENTER LINE OF
HOOD & DUCT
K273 SERIES MOUNTING
8”
4”
120 VOLT 60 HZ GROUNDED WALL OUTLET
OFFSET FROM DUCT CENTER LINE
(STAY WITHIN 8” DIMENSION)
30” - 36”
WOOD CROSS SUPPORT –
SECURED TO FRAMING AND
LOCATED BEHIND DRYWALL
DRYWALL
HOOD DISTANCE ABOVE 36” HIGH COOKTOP (SEE NOTE AT RIGHT)
CEILING
HEIGHT
8 FEET 27-3/4” 28-3/4” 29-3/4”
9 FEET 27-3/4” 28-3/4” 29-3/4” 30-3/4” 31-3/4” 32-3/4” 33-3/4”
10 FEET WITH
FEXTK273
24” 25” 26” 27” 28” 29” 30”
MOUNTING BRACKET LOCATION ABOVE 36” HIGH COOK TOP
FRAMING BEHIND
WOOD CROSS
SUPPORT
L
C
L
13
10 "
16
30-3/4” 31-3/4” 32-3/4” 33-3/4”
MOUNTING BRACKET
LOCATION
(ABOVE 36” HIGH
COOKTOP)
NOTE: Minimum hood distance above
cooktop must not be less than 24”.
A maximum of 30” above the cooktop is
highly recommended for best capture of
cooking impurities.
Distances over 30” above the cooktop
are at the installer’s and user’s
discretion - providing that ceiling height
and flue length permit.
BEST BY BROAN P.O. BOX 140 HARTFORD, WISCONSIN 53027
Loading...