Bernafon SoundGate 3, Phone Adapter 2, TV Adapter 2, SoundGate Mic, RC-N Remote Control Manual For Wireless Connectivity

GUIDE
FOR WIRELESS
CONNECTIVITY

SoundGate 3
SoundGate Mic
TV

Adapter 2

Phone Adapter

2

RC-N Remote Control

2

Purpose

In this guide, you will nd detailed instructions for SoundGate 3 operation with a Bluetooth®-enabled
mobile telephone, SoundGate Mic, and accessories for television and landline telephone use.
You will also nd instructions for how to set up the demo version of the RC-N remote control.

Equipment Required for SoundGate 3 Operation

Before you begin, ensure the SoundGate 3 is completely charged and the following components
are readily available for use:

· One, or a pair of hearing aids that offer wireless connectivity with

S o u n d G ate 3

· One completely charged SoundGate 3 and the accessories delivered

within its original packaging
– Neck strap antenna
– Wall outlet charging unit or USB charger cable
– Charger cradle

· One Bluetooth

®

-enabled mobile phone

· One iPhone

®

(SoundGate App supports iPhone 5s, iPhone 5c, iPhone 5, iPhone 4s,
andiPhone 4)

3

GUIDE FOR WIRELESS CONNECTIVITY

· One SoundGate Mic and the following accessory delivered within its

original packaging
– Power adapter

· One TV Adapter 2 and the following accessories delivered within its

original packaging
– Power adapter
– SCART adapter
– RCA stereo cable
– TOSLINK cable
– Mini jack adapter

· One television or audio/video source, e.g., PC or laptop computer

· One Phone Adapter 2 and the following accessories delivered within its

original packaging
– Power adapter
– Standard analog phone cable

· One landline telephone with an active telephone network connection

4

Equipment Required for
RC-N Operation

Before you begin, ensure the RC-N remote control has two (2) AAAA batteries inserted and the
following components are readily available for use:

· One, or a pair of hearing aids that offer wireless connectivity

· One RC-N remote control

5

GUIDE FOR WIRELESS CONNECTIVITY

Preparing the SoundGate 3
and Hearing Aids

With the hearing aids connected to the Oasis tting software, choose Options and select
Start Pairing in the area of the screen designated for SoundGate 3 / Remote control.

Ensure the SoundGate 3 is fully charged and powered ON. Then follow the tting software
instructions to complete the pairing between the SoundGate 3 and the connected hearing aids.

1. Press the Volume Up key on the SoundGate 3 while holding it approximately 30 – 50 cm (1– 1½ feet)
from the hearing aids

2. To conrm the link between SoundGate 3 and the connected hearing aids, repeat this step by pressing
the Volume Up key

The Oasis tting software will conrm the successful pairing.

Before disconnecting the hearing aids, be sure to save the tting session in Oasis by clicking

Save and Quit.

6

Using SoundGate 3
with a Mobile Telephone

Pairing the SoundGate 3 and Mobile Telephone

A secure connection between the SoundGate 3 and mobile telephone must be established prior
to Bluetooth® streaming. Ensure the SoundGate 3 and mobile telephone are positioned within one meter
(3 feet) of each other, and follow the steps below to pair the devices.

1. Prepare the mobile telephone for Bluetooth® pairing

As this process may vary from one mobile telephone to the next, refer to the instruction manual for
the mobile telephone when available. If the manual is not readily available, Bluetooth® settings can
typically be found under the mobile telephone’s “Settings” menu.

Here is an example, using an iPhone 5 mobile telephone:

· Press the “Settings” icon on the home screen

· Press “Bluetooth

®

”

· If Bluetooth

®

function is turned OFF, swipe your nger across the touch screen from left toright to

turn the function ON

The mobile telephone is now prepared to search for other active Bluetooth® devices within range.

2. Prepare the SoundGate 3 for Bluetooth® pairing

· Press and hold the SoundGate 3 Power key for 5- 6 seconds

· The LED indication will begin ashing rapidly blue. This indicates that the SoundGate 3

is in pairing mode. Pairing mode will be active for two minutes.

3. Activate pairing

· Once both devices are in active pairing mode, the Bluetooth

®

mobile telephone will locate

the SoundGate 3, and the name “SoundGate 3” will appear in the mobile phone display

· Select “SoundGate 3”

· When prompted to enter a pin code by the mobile telephone, enter “0000” (four zeros)

and press “OK”. The phone will now complete pairing and connect the two devices.