Page 1
MSDS Report No.: GZ1111140849/CHEM Date: NOV 17, 2011 Page 1 of 1
SHENZHEN BALANCE STARS ELECTRONIC CO.,LTD
4F,6A,JINNAN INDUSTY BUJI LUOGANG SHENZHEN
SGS Job No. : CP11-007830-SZ
Sample Name : HEATSINK COMPOUNDS
End Uses : Thermal conductor
Composition/Ingredient of sample
(as per client submission)
Job Receiving Date : NOV 11, 2011
Last Information Date : NOV 15, 2011
MSDS Preparation Period : NOV 11, 2011 TO NOV 16, 2011
Service Requested : Material Safety Data Sheet (MSDS) for the sample with submitted
Summary : As per request, the contents and formats of the MSDS are prepared in
Signed for and on behalf of
SGS-CSTC Ltd.
______________________
Allen Xie
Approved Signatory
See section 2 Composition/information on ingredients on the MSDS report
:
composition.
accordance with US Regulations Relating to Labor 29 CFR 1910.1200 (g),
and is provided per attached.
Page 2
Page 1/7
Material Safety Data Sheet
Printing date 11/17/2011 Reviewed on 11/15/2011
1 Identification of the substance/mixture and of the company/undertaking
·
Product identifier
·
Trade name: HEATSINK COMPOUNDS
·
Article number:
·
Application of the substance / the preparation:
·
Details of the supplier of the safety data sheet
·
Manufacturer/Supplier:
·
Name:
·
Full address:
·
Phone number:
·
FAX:
·
Further information obtainable from:
·
Emergency telephone number:
·
Email:
·
Reference Number:
Mr. Lin
+86-755-25684336
2 Composition/information on ingredients
Not available
Thermal conductor
SHENZHEN BALANCE STARS ELECTRONIC CO.,LTD
4F,6A,JINNAN INDUSTY BUJI LUOGANG SHENZHEN
+86-755-25808260
SHENZHEN BALANCE STARS ELECTRONIC CO.,LTD
+86-13902941616
CP11-007830-SZ; GZ1111140849/CHEM.
·
Chemical characterization: Mixtures
·
Description:
·
Dangerous components:
Mixtrue of the substances listed below with nonhazardous additions.
63148-62-9 silicone oil 54.57%
1314-13-2 zinc oxide 18.14%
409-21-2 silicon carbide 9.63%
·
Non-dangerous components:
471-34-1 calcium carbonate 17.66%
·
Remark:
silicone oil (CAS No. :63148-62-9)
Remark: Silicone compounds
calcium carbonate (CAS No. :471-34-1)
Remark: Carbon compounds
zinc oxide (CAS No. :1314-13-2)
Remark: Metal oxide compounds
silicon carbide (CAS No. :409-21-2)
Remark: Diamond powder compounds
3 Hazards identification
·
Classification of the substance or mixture
·
Information concerning particular hazards for human and environment:
The product has to be labelled due to the calculation procedure of international guideline.
·
Classification system:
The classification was made according to the latest editions of international substances lists, and expanded
upon from company and literature data.
·
Label elements
·
Code letter and hazard designation of product:
Irritant
Dangerous for the environment
·
Risk phrases:
Irritating to eyes.
(Contd. on page 2)
DR
USA
Page 3
Page 2/7
Material Safety Data Sheet
Printing date 11/17/2011 Reviewed on 11/15/2011
Trade name: HEATSINK COMPOUNDS
(Contd. of page 1)
Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
·
Safety phrases:
Keep out of the reach of children.
Do not breathe gas/fumes/vapour/spray (appropriate wording to be specified by the manufacturer).
Do not empty into drains, dispose of this material and its container at hazardous or special waste collection
point.
If swallowed, seek medical advice immediately and show this container or label.
·
Classification system:
·
NFPA ratings (scale 0 - 4)
Health = 1
Fire = 0
100
·
HMIS-ratings (scale 0 - 4)
HEALTH
FIRE
REACTIVITY
Reactivity = 0
1
Health = 1
0
Fire = 0
Reactivity = 0
0
4 First aid measures
·
After inhalation:
·
After skin contact:
·
After eye contact:
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
·
After swallowing:
Supply fresh air; consult doctor in case of complaints.
Immediately rinse with water.
If symptoms persist consult doctor.
5 Firefighting measures
·
Suitable extinguishing agents:
CO₂, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
·
Special hazards arising from the substance or mixture
·
Protective equipment:
No special measures required.
No further relevant information available.
6 Accidental release measures
·
Personal precautions, protective equipment and emergency procedures
·
Environmental precautions:
Do not allow product to reach sewage system or any water course.
Inform respective authorities in case of seepage into water course or sewage system.
Do not allow to enter sewers/ surface or ground water.
·
Methods and material for containment and cleaning up:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Ensure adequate ventilation.
·
Reference to other sections
See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.
Not required.
7 Handling and storage
·
Handling:
·
Precautions for safe handling
Ensure good ventilation/exhaustion at the workplace.
Prevent formation of aerosols.
DR
(Contd. on page 3)
USA
Page 4
Page 3/7
Material Safety Data Sheet
Printing date 11/17/2011 Reviewed on 11/15/2011
Trade name: HEATSINK COMPOUNDS
(Contd. of page 2)
·
Information about protection against explosions and fires:
·
Storage:
·
Requirements to be met by storerooms and receptacles:
·
Information about storage in one common storage facility:
·
Further information about storage conditions:
·
Specific end use(s)
No further relevant information available.
Keep receptacle tightly sealed.
8 Exposure controls/personal protection
No special measures required.
No special requirements.
Not required.
·
Additional information about design of technical systems:
·
Components with limit values that require monitoring at the workplace:
No further data; see item 7.
471-34-1 calcium carbonate
PEL (USA)
15* 5** mg/m³
*total dust **respirable fraction
REL (USA)
10* 5** mg/m³
*total dust **respirable fraction
TLV (USA)
TLV withdrawn
409-21-2 silicon carbide
PEL (USA)
15* 5** mg/m³
fibrous dust: *total dust **respirable fraction
REL (USA)
10* 5** mg/m³
*total dust **respirable fraction
TLV (USA)
10 I* 3 R* mg/m³
E* 0.1 f/cc** *nonfibrous **fibrous forms
WEL (Great Britain)
10* 4** mg/m³
*total inhalable **respirable
·
Additional information:
·
Personal protective equipment:
·
General protective and hygienic measures:
The lists that were valid during the creation were used as basis.
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing.
Wash hands before breaks and at the end of work.
Avoid contact with the eyes.
Avoid contact with the eyes and skin.
·
Breathing equipment:
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure
use respiratory protective device that is independent of circulating air.
·
Protection of hands:
Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/
the chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the
degradation
·
Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality
and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the
resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the
application.
·
Penetration time of glove material
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be
observed.
(Contd. on page 4)
DR
USA
Page 5
Page 4/7
Material Safety Data Sheet
Printing date 11/17/2011 Reviewed on 11/15/2011
Trade name: HEATSINK COMPOUNDS
(Contd. of page 3)
·
Eye protection:
Tightly sealed goggles
DR
Page 6
Page 5/7
Material Safety Data Sheet
Printing date 11/17/2011 Reviewed on 11/15/2011
Trade name: HEATSINK COMPOUNDS
(Contd. of page 4)
11 Toxicological information
·
Acute toxicity:
·
LD/LC50 values that are relevant for classification:
63148-62-9 silicone oil
Oral LD50 >17000 mg/kg (rat)
Dermal LD50 >2000 mg/kg (rabbit)
1314-13-2 zinc oxide
Oral LD50 > 5000 mg/kg (rat)
·
Primary irritant effect:
·
on the skin:
·
on the eye:
·
Sensitization:
·
Additional toxicological information:
The product shows the following dangers according to internally approved calculation methods for
preparations:
Irritant
No irritant effect.
Irritating effect.
No sensitizing effects known.
12 Ecological information
·
Persistence and degradability
·
Bioaccumulative potential
·
Remark:
·
Additional ecological information:
·
General notes:
Toxic for fish
Water hazard class 2 (Self-assessment): hazardous for water
Do not allow product to reach ground water, water course or sewage system.
Danger to drinking water if even small quantities leak into the ground.
Also poisonous for fish and plankton in water bodies.
Toxic for aquatic organisms
No further relevant information available.
No further relevant information available.
13 Disposal considerations
·
Waste treatment methods
·
Recommendation:
Must not be disposed of together with household garbage. Do not allow product to reach sewage system.
·
Uncleaned packagings:
·
Recommendation:
Disposal must be made according to official regulations.
14 Transport information
·
UN-Number
·
DOT, ADR, IMDG, IATA
·
UN proper shipping name
·
DOT, ADR, IMDG, IATA
·
Transport hazard class(es)
·
DOT, ADR, IMDG, IATA
·
Class
·
Label
Not applicable
Not applicable
Not applicable
Not applicable
(Contd. on page 6)
USA
DR
Page 7
Page 6/7
Material Safety Data Sheet
Printing date 11/17/2011 Reviewed on 11/15/2011
Trade name: HEATSINK COMPOUNDS
(Contd. of page 5)
·
Packing group
·
DOT, ADR, IMDG, IATA
·
Environmental hazards:
·
Marine pollutant:
·
Special precautions for user
·
Danger code (Kemler):
·
Transport in bulk according to Annex II of
MARPOL73/78 and the IBC Code
15 Regulatory information
·
Sara
·
Section 355 (extremely hazardous substances):
None of the ingredients is listed.
·
Section 313 (Specific toxic chemical listings):
None of the ingredients is listed.
·
TSCA (Toxic Substances Control Act):
All ingredients are listed.
·
Proposition 65
·
Chemicals known to cause cancer:
None of the ingredients is listed.
·
Chemicals known to cause reproductive toxicity for females:
None of the ingredients is listed.
·
Chemicals known to cause reproductive toxicity for males:
None of the ingredients is listed.
·
Chemicals known to cause developmental toxicity:
None of the ingredients is listed.
·
Cancerogenity categories
·
EPA (Environmental Protection Agency)
1314-13-2 zinc oxide II
·
IARC (International Agency for Research on Cancer)
None of the ingredients is listed.
·
NTP (National Toxicology Program)
None of the ingredients is listed.
·
TLV (Threshold Limit Value established by ACGIH)
409-21-2 silicon carbide A2
·
MAK (German Maximum Workplace Concentration)
409-21-2 silicon carbide 2
·
NIOSH-Ca (National Institute for Occupational Safety and Health)
None of the ingredients is listed.
·
OSHA-Ca (Occupational Safety & Health Administration)
None of the ingredients is listed.
Not applicable
Not applicable
No
Not applicable.
Not applicable
Not applicable.
(Contd. on page 7)
USA
DR
Page 8
Page 7/7
Material Safety Data Sheet
Printing date 11/17/2011 Reviewed on 11/15/2011
Trade name: HEATSINK COMPOUNDS
(Contd. of page 6)
·
Product related hazard informations:
·
Hazard symbols:
Irritant
Dangerous for the environment
·
Risk phrases:
Irritating to eyes.
Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
·
Safety phrases:
Keep out of the reach of children.
Do not breathe gas/fumes/vapour/spray (appropriate wording to be specified by the manufacturer).
Do not empty into drains, dispose of this material and its container at hazardous or special waste collection
point.
If swallowed, seek medical advice immediately and show this container or label.
16 Other information
·
***************************************************************************************
The contents and format of this MSDS/SDS are in accordance with 29 CFR 1910.1200(g)
DISCLAIMER OF LIABILITY
The information in this MSDS/SDS was obtained from sources which we believe are reliable. However, the
information is provided without any warranty, express or implied, regarding its correctness. The conditions
or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond
our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability
for loss, damage or expense arising out of or in anyway connected with the handling, storage, use or disposal
of the product. This MSDS/SDS was prepared and is to be used only for this product. If the product is used as
a component in another product, this MSDS/SDS information may not be applicable.
·
***************************************************************************************
End of document
USA
DR
Loading...