BenQ WM002 Installation Manual

WM002

LCD Display Wall Mounting Kit
Installation Guide

Welcome

Copyright

Copyright 2006 by BenQ Corporation. All rights reserved. No part of this publication may be

reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or

computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical,

manual or otherwise, without the prior written permission of this company.

English

Disclaimer

BenQ Corporation makes no representations or warranties, either expressed or implied, with respect to

the contents hereof and specifically disclaims any warranties, merchantability or fitness for any

particular purpose. Further, BenQ Corporation reserves the right to revise this publication and to make

changes from time to time in the contents hereof without obligation of this company to notify any person

of such revision or changes.

2

Important safety instructions

1. For safety reasons, please follow the important safety instructions in the LCD

Display’s user’s manual.

2. This wall mount kit can hold up to 20 Kg of weight. It is necessary to consult

professional technicians prior to mounting the LCD Display. Before

installation, check whether the material of wall is able to support this weight.

Check to see if the brick is of good quality material with good mortar/cement

joints or if the bricks are loose and cracked, and if the bricks back up to

another room or wall. Ensure that there are no signs of water damage or

decay.

3. Do not install the LCD Display in a place where impact or vibration can

affect.

4. Do not place a heat source (radiator or heater) or a humidifier under the

installed LCD Display.

5. Do not install the LCD Display near a sprinkler.

6. Do not install the LCD Display by yourself alone. Get some help from others.

7. Make sure to unplug before installing the LCD Display.

8. Do not hang on the LCD Display once it is installed.

9. Always remember SAFETY FIRST and keep this guide for future reference.

English

Always perform a safety load test before putting the LCD
Display on the wall mount to ensure the wall can afford
the integrity of your installation.

3