Benq WDRT8192 Users Manual

WDRT8192
Wireless Dongle

Quick Start Guide

Table of contents

English...............................................................................................4

Français ......................................................................................... 12

Deutsch......................................................................................... 20

Italiano........................................................................................... 28

Español .......................................................................................... 36

Portuguê ....................................................................................... 44

Svenska.......................................................................................... 52

Русский ....................................................................................... 60

Nederlands................................................................................... 68

Polski ............................................................................................. 76

Türkçe........................................................................................... 84

Čeština......................................................................................... 92

ä·Â................................................................................................ 100

繁體中文.................................................................................... 108

简体中文.................................................................................... 116

日本語 ........................................................................................ 124

한국어 ........................................................................................ 132

..................................................................................... 140

English 2

BenQ Wireless Dongle Quick Start Guide

Connection and EZ QPresenter Installation

This Quick Start Guide provides you with a basic overview of how to
connect the projector to your computer wirelessly.

Follow the steps below to get it all set up in just a few minutes.

1. Connect the wireless dongle to the USB jack of the projector.

2. Select “USB Drive/Wireless Display” by pressing and press

“OK” on your projector.

English 3

3. You will be prompted to the “To install BenQ EZ QPresenter”
page and follow the steps as instructed.

4. Select “BenQ GP10” as
your WLAN connection on
your computer (make sure
your computer is equipped

with wireless network card).

English4

5. Start a web browser and key
in IP address

192.168.100.10 into the
address bar and press

“Enter”.

6. Select OS version and start downloading and installing BenQ EZ

QPresenter by following the on-screen instructions on you PC.

7. Open BenQ EZ QPresenter to start wireless projection
i. Select “BenQ GP10” from wireless access point menu of your

PC/NB.

ii. Open BenQ EZ QPresenter to start projection in mirror mode

(default).

English 5

Tips:

• If you have installed BenQ EZ QPrensenter prior to step i., it
will be connected to GP10 automatically.

• You can disable or enable audio streaming baed on your
preferences.

English6

Frequently Asked Questions

• Q: Why does my CPU become busier after launching the
BenQ EZ QPrensenter?

• A: BenQ EZ QPresenter counts on your PC CPU to encode the
screen images to reduce the data that needs to be transferred to the
receiver. Hence there will be some overhead to your PC. In general,
for a 4+ ranking PCs, it would need up to 30% of CPU overhead to
perform wireless display.

• Q: Why can’t I project my screen?

• A: BenQ EZ QPresenter needs to access the network connection at
some point. As a result, when your Anti-virus or network security
software prompts you for permission to allow the sender software to
access the network, please grant access to proceed, or choose “add
rule” to the fire wall settings.

• Q: Why does my display frame rate slow down?

• A: BenQ EZ QPresenter needs to encode display content while
sending massive real-time data to the projector.

i. PC: A dual core PC (excluding Atom processors) or Mac is

required to encode the screen images at 30FPS (Frame Per
Second) speed. However, if you would like to increase the FPS

speed, you can:
a. Use better media players, such as GOM player
b. Close all unused apps
c. Use a faster PC with Windows Experience Score higher than 4
(4+ recommended)

ii. Network:
Using 802.11n WiFi
a. Move your laptop closer to the projector
b. Disable the “Minimum Power Consumption” option from the

“Advanced Tab” in your WiFi network Adopter Property setting
c. Lower PC screen resolution

English 7

System Requirements for Wireless Display

CPU Intel/AMD Dual core 2 GHz or higher

Windows

Mac

** Mac OS version will be available in Nov. 2012.

Graphic card Intel, NVIDIA or AMD graphic card with

OS Windows XP Professional SP3, Vista SP3,

Wi-Fi 802.11n
CPU Intel Dual core 1.4 GHz or higher

Graphic card Intel, NVIDIA or AMD graphic card with

OS Mac OS X 10.6.5 and above
Recommend

ed Models

Wi-Fi 802.11n

(ATOM not supported)

64MB VRAM or above

Windows 7 SP2

(PowerPC not supported)

64MB VRAM or above

MacBook after 2009-01-21
All series of Macbook Pro
Macbook Air after 2010-06-08

English8

Wi-Fi Dongle Specifications

Model Name WDRT8192
Wireless Standard IEEE 802.11 b/g/n
Interface USB 2.0
Data Transfer Rate up to 300Mbps
Frequency Band 2.4GHz ISM Band
Security 64 bit/128 bit WEP, TKIP, AES, WPA,

Supported OS Windows 2000/XP/Vista/7
Minimum PC System

Requirement

WPA2

CPU: 200MHz or above
RAM: 64MB RAM or above, 128MB
recommended

English 9